VT-3512 GY - Alarm clock radio Vitek - Free user manual and instructions

Product Type	Alarm Clock Radio
Brand	Vitek
Model	VT-3512 GY
Color	Gray
Dimensions (W x H x D)	Approximately 18 x 10 x 12 cm
Weight	Approximately 0.5 kg
Power Supply	AC 230V, 50Hz (adapter included) or 2 x AAA batteries (backup)
Radio Bands	FM / AM
Display Type	LED with adjustable brightness
Alarm Modes	Radio or buzzer
Number of Alarms	2 (dual alarm)
Snooze Function	Yes (9-minute interval)
Sleep Timer	Yes (adjustable up to 90 minutes)
Headphone Jack	3.5 mm stereo
Backup Battery	Required for time and alarm memory during power outage
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use harsh chemicals or water.
Safety Precautions	Keep away from water, do not disassemble, unplug before cleaning.
Spare Parts Available	Power adapter (model specific) and batteries (standard AAA)
Repairability	No user-serviceable parts; contact authorized service center for repairs.
Manual Languages	English, Russian, Ukrainian, and others (multi-language manual)

Frequently Asked Questions - VT-3512 GY Vitek

How do I set the time on my Vitek VT-3512 GY alarm clock?

Press and hold the TIME SET button until the hour flashes. Use the + and - buttons to adjust the hour, then press TIME SET again to set minutes. Repeat to set minutes. Once set, press TIME SET to confirm.

How do I set an alarm?

Press and hold the ALARM 1 or ALARM 2 button. The hour will flash. Use + and - to adjust, then press the alarm button again to set minutes. After setting, press the alarm button once more to confirm and enable the alarm.

How can I turn off the alarm or snooze?

When the alarm sounds, press the SNOOZE button to silence it for 9 minutes. To turn off the alarm completely, press the ALARM ON/OFF button. The alarm icon on the display will disappear.

How do I listen to the radio?

Press the MODE button to switch to radio mode. Tune to your desired station using the + and - buttons. You can also search automatically by holding the + or - button. Adjust volume with the VOLUME dial.

Why is my alarm not sounding?

Ensure the alarm is enabled (alarm icon visible on display). Check that the volume is not set to minimum. If the radio alarm mode is selected, make sure the radio is tuned to a station. Also check the backup batteries if the power is disconnected.

How do I adjust the display brightness?

Press the DIMMER button repeatedly to cycle through brightness levels (high, medium, low, off). Some models may require holding the button.

What type of batteries does the backup use?

The backup battery compartment requires two AAA batteries (not included). These maintain the time and alarm settings during a power outage.

How do I reset the clock to factory settings?

If the device becomes unresponsive, locate the RESET hole (usually on the bottom or back). Use a paperclip to press the reset button. This will clear all settings.

Can I use headphones with this radio?

Yes, there is a 3.5 mm headphone jack on the side or back. When headphones are plugged in, the built-in speaker is muted.

How do I set the sleep timer?

Press the SLEEP button to turn on the radio and start the timer. Each press increases the timer by 10 minutes (max 90 minutes). The radio will automatically turn off after the set time.

USER MANUAL VT-3512 GY Vitek

1. Lighted display
2. SNOOZE button
3. SLEEP button
4. HOUR setting button
5. Power cord
6. MINUTE setting button
7. TIME setting button
8. ALARM setting button
9. Radio frequency scale
10. Function selector
11. Band selector
12. FM antenna
13. VOLUME/BUZZER knob
14. Frequency tuning knob
15. Light adjustment
16. Alarm indicator
17. Speaker
18. Battery compartment

USEFUL INFORMATION

This clock radio only operates on alternating current. This clock radio has a built-in antenna (12) for better reception of FM1 and FM2 frequency signals. Connect the power cord (5) to the outlet. Make sure that the voltage indicated on the device matches the voltage in your home. Place one 9 V battery (not included) into the battery compartment (18). The battery maintains the clock in case of power failure. In such cases, the display will not work, but the time is being maintained.

RADIO

1. Set the ON/AUTO/OFF selector (10) to the ON position.
2. Set the band selector (11) to the desired band.
3. Tune to the desired radio station using the tuner knob (14).
4. Adjust the volume using the volume knob (13).
5. To turn off the radio, set the MODE selector (10) to the OFF position.
6. In the upper left-hand corner of the lighted display, the alarm status is indicated.

SETTING THE CURRENT TIME

While holding the TIME button (7), set the hours using the HOUR button (4) and the minutes using the MIN button (6).

SETTING THE ALARM TIME

While holding the ALARM button (8), set the hours using the HOUR button (4) and the minutes using the MIN button (6).

SLEEP TIMER

1. This clock radio model features a "Sleep Timer" func-

ENGLISH

tion, which automatically turns off the radio after a preset period – from 1 hour 59 minutes to 1 minute.

1. Press the SLEEP button (3) and, holding it down, set the time using the HOUR button (4) and the MIN button (6), after which the radio should turn off automatically.
2. To turn the radio off before the set time, press the SNOOZE button (2).

WAKING UP TO MUSIC OR A BUZZING ALARM

1. Set the ON/AUTO/OFF selector (10) to the AUTO position.
2. Tune to the desired radio station.
3. Set the desired volume.
4. The radio will turn on at the desired time.
5. If you want to wake up to the buzzing alarm, set the VOLUME/BUZZER knob (13) to the BUZZER position.
6. The buzzing alarm will turn on at the desired time.

"SNOOZE" FUNCTION

The radio or buzzing alarm can be silenced for 9 minutes by pressing the SNOOZE button (2). You can lightly sleep during this time. In 9 minutes the alarm repeats itself.

If you want to fall asleep and wake up to music

1. If you want to fall asleep and wake up to music, set the alarm time as instructed in the "Setting the Alarm Time" section and set the selector (10) to the AUTO position.
2. Set the SLEEP timer as instructed in the "Sleep Timer" section and adjust the volume.
3. The radio will automatically turn off after the preset SLEEP period and turn on automatically the next day.

DISPLAY LIGHTING SWITCH

When the display lighting switch (15) is set to HI, information shown on the display will be brighter than when the switch is set to the LO position.

SPECIFICATIONS

Frequency Bands:

FM1 - 64-87 MHz,

FM2 - 88-108 MHz

Speaker: 2.25" 8 Ohms

Battery: 9 V (not included)

Power Source:

230 V\~50 Hz

ENGLISH

CARE

Wipe the device body with a soft cloth, moistening with water if necessary. Unplug the device from the power outlet while cleaning. Do not use abrasive or other cleaning substances as they can damage the device body.

IN THE INTEREST OF CONSTANTLY PERFECTING ITS PRODUCTS, THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES TO THE TECHNICAL CHARACTERISTICS OF THE DEVICE WITHOUT PRIOR CONSUMER NOTICE

SERVICE LIFE – NOT LESS THAN 3 YEARS

GUARANTEE

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC Requirements as laid down by the Council Directive 89/336/EEC and to the Low Voltage Regulation (23/73 EEC)

РУССКИЙ

КНОПКИ УПРАВЛЕНИЯ

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxxx means that the item was manufactured in June (the sixth month) 2006.

RUS