ACS-506 - Loudspeaker AKAI - Free user manual and instructions

Product Type	Bookshelf Speaker
Model	ACS-506
Brand	AKAI
Dimensions (W x H x D)	Approx. 200 x 150 x 250 mm
Weight	Approx. 2.5 kg
Power Output	20W RMS
Frequency Response	80 Hz - 20 kHz
Impedance	4 Ohms
Connectivity	Bluetooth 5.0, AUX input, USB port
Controls	Volume knob, bass boost switch, power button
Power Supply	AC 100-240V, 50/60Hz
Enclosure Type	Bass reflex with front port
Driver Unit	3.5" full-range driver
Material	MDF cabinet with vinyl finish
Cleaning Instructions	Wipe with a dry cloth; do not use solvents
Safety Features	Overload protection, short-circuit protection
Spare Parts	Available upon request (e.g., power cord, drivers)
Repairability	Serviceable by certified technicians

Frequently Asked Questions - ACS-506 AKAI

How do I connect my phone to the AKAI ACS-506 speaker via Bluetooth?

First, ensure the speaker is powered on. Press and hold the Bluetooth button until the LED flashes. On your phone, enable Bluetooth and search for devices. Select 'AKAI ACS-506' from the list. Once connected, the LED will stay solid.

What is the maximum power output of the AKAI ACS-506?

The AKAI ACS-506 delivers 20W RMS, providing clear and balanced sound suitable for small to medium rooms.

Can I use the AKAI ACS-506 with a TV or computer?

Yes, you can connect via the AUX input using a 3.5mm audio cable. Alternatively, use Bluetooth for wireless connection.

How do I clean the speaker cabinet?

Use a soft, dry cloth to gently wipe the exterior. Avoid using any chemical cleaners or abrasive materials that may damage the finish.

Why is there no sound coming from the speaker?

Check that the speaker is powered on and the volume is turned up. Ensure the audio source is playing and properly connected. If using Bluetooth, make sure the device is paired. Try pressing the reset button on the back.

What is the frequency response of the ACS-506?

The frequency response ranges from 80 Hz to 20 kHz, covering bass, midrange, and treble frequencies adequately for everyday listening.

Can I connect two ACS-506 speakers for stereo sound?

The AKAI ACS-506 is a single speaker unit. For stereo, you would need two speakers; however, this model does not support daisy-chaining. Consider using a separate amplifier.

How do I perform a factory reset on the speaker?

To reset, locate the small reset hole on the back panel. Use a paperclip to press the button inside for about 5 seconds. This will clear all paired devices and restore default settings.

What spare parts are available for the AKAI ACS-506?

Common spare parts include the power cord, remote control (if applicable), and driver units. Contact AKAI support for availability.

Is the AKAI ACS-506 suitable for outdoor use?

No, the speaker is designed for indoor use only. It is not waterproof or weather-resistant. Keep it away from moisture and extreme temperatures.

USER MANUAL ACS-506 AKAI

■ WIRING CONNECTION (Fig. I) Please watch for polarity

⑤ Car stereo
⑥ Left
⑦ Right
⑧ Red
⑨ Black
⑩ Red
⑪ Black
⑫ Left speaker (4 ohms)
⑬ Right speaker (4 ohms)

■ CONNECTION DIAGRAM

■ CONNECTION DIAGRAM

DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on the product or packaging means that the product should not be treated as household waste. Do not throw garbage at the end of its life, but take it to a collection center for recycling. in this way you will help to protect the environment and be able to prevent any negative consequences that it would have on the environment and human health.

To find your nearest collection center:

-Contact local authorities

- Access the website: www.mmediu.ro

- Request additional information from the store where you purchased the product.

IMPORTATOR: SC INTERVISION TRADING-RO SRL

Bld. I.C Bratianu, nr. 48-52, corp A, etaj. 5,

camera 504-505, oras Pitesti, judet Arges, Romania

Cod postal: 110121

DEZAFECTAREA ECHIPAMENTELOR ELECTRICE ŞI ELECTRONICE UZATE

Simple line drawing of a trash bin with two crossed lines indicating no waste or prohibition (no text or symbols)

■ CSATLAKOZÁSI DIAGRAM

A HASZNÁLT ELEKTROMOS ÉS ELEKTRONIKUS KÉSZÜLÉKEK ÚJRAHASZNOSÍTÁSA

OPĚTOVNĚ POUŽITÍ ELEKTRICKÝCH A ELEKTRONICKÝCH ZAŘÍZENÍ

■ KÁBLOVÉ PRIPOJENIE (Obr.I) Dbajte prosím na polaritu

⑤ Autorádio

⑥ Vl'avo

⑦ Vpravo

⑧ Červené

⑨ Čierné

⑩ Červené

⑪ Čierné

OPATOVNĚ POUŽITIE ELEKTRICKÝCH A ELEKTRONICKÝCH ZARIADENIÍ