WMS 97147 AWD3 - Washing machine LERAN - Free user manual and instructions

Brand	LERAN
Model	WMS 97147 AWD3
Product Type	Freestanding Washing Machine
Loading Type	Front Load
Capacity	8 kg
Spin Speed	1400 rpm
Energy Efficiency Class	A+++
Dimensions (H x W x D)	85 cm x 60 cm x 55 cm
Net Weight	70 kg
Power Supply	220-240 V, 50 Hz, 10 A
Number of Programs	15
Special Functions	Delay Start, Quick Wash, Eco Wash, Child Lock
Display Type	LED Digital
Noise Level (Wash/Spin)	52 dB / 76 dB
Maintenance	Clean lint filter, detergent drawer, drum cleaning cycle
Safety Features	Child Lock, Overflow Protection, Unbalanced Load Detection
Spare Parts Availability	10 years after discontinuation
Repairability Index	8.0 / 10

Frequently Asked Questions - WMS 97147 AWD3 LERAN

How do I start a wash cycle on the LERAN WMS 97147 AWD3?

Load the laundry, add detergent, select the desired program using the program dial, and press the Start/Pause button.

What should I do if the machine does not drain water?

Check the drain hose for kinks, clean the pump filter located at the bottom front, and ensure the drain pipe is not clogged.

Can I use liquid detergent in this washing machine?

Yes, but pour it into the detergent drawer compartment marked with 'II' or use a detergent ball. Avoid overfilling.

How do I activate the child lock?

Press and hold the Child Lock button (usually indicated by a padlock icon) for 3 seconds until the lock symbol appears on the display.

What is the maximum spin speed of this model?

The maximum spin speed is 1400 rpm, but you can adjust it with the spin speed selector.

How often should I clean the lint filter?

Clean the lint filter after every wash, especially if you notice water draining slowly. It is located at the bottom front behind the access panel.

Why is the drum not rotating during the wash?

This may be due to an unbalanced load. The machine will try to redistribute the laundry. If the issue persists, check if the machine is level and reduce the load.

How do I install the washing machine?

Remove all transport bolts, connect the inlet hose to a water tap with a 3/4 inch thread, attach the drain hose to a standpipe, and level the machine using the adjustable feet.

What does the error code 'E10' mean?

Error code E10 typically indicates a water supply issue. Check that the water tap is open and the inlet hose is not kinked or blocked.

Can I delay the start of a wash?

Yes, use the Delay Start button to set a delay from 1 to 24 hours. Press repeatedly to select the desired delay time.

USER MANUAL WMS 97147 AWD3 LERAN

Line drawing of two hands holding a transparent container with a curved band (no text or symbols)

Four identical gray circular objects with radial slots, arranged in a 2x2 grid (no text or symbols)

Pure diagram of a U-shaped pipe with connectors, no text or symbols present

Technical line drawing of a curved mechanical component (no text or symbols)

Line drawing of a wrench handle with hexagonal end caps (no text or symbols)

Гаечный ключ

Close-up of a black electronic component with metallic pins, no visible text or symbols

Technical line drawing of a mechanical component with no visible text or symbols

Illustration of hands using a screwdriver to adjust a mechanical component (no text or symbols present)

Illustration of a hand holding a ball with an arrow indicating motion (no text or symbols)

Diagram of a computer monitor with a wrench inserted into a socket, showing mechanical assembly (no text or symbols)

Illustration of a hand using a pen to mark a small circular mark on a surface (no text or symbols)

Diagram showing a hand pressing down on a textured surface with directional arrows (no text or symbols)

Simple line drawing of a hand pressing a button on a surface with a circular object above (no text or symbols)

Technical diagram of a device interior with labeled components and directional arrows (no text or symbols)

2

Illustration of a hand holding a flexible hose with a handle, no text or symbols present

Technical line drawing of a three-tiered industrial device with no visible text or symbols

Примечание:

Illustration of a hand inserting a device into a multi-chambered container with arrows indicating action (no text or symbols)

Technical line drawing of a mechanical device with internal components and mounting base (no text or symbols)

Фильтр

Illustration of a hand placing a small object into a rectangular block with a downward arrow (no text or symbols)

Diagram showing a mechanical component with a rotating knob and a curved surface, no text or symbols present

Simple diagram showing a circular object with an arrow pointing to a square box containing a sphere (no text or symbols)

Illustration of a hand pressing a button on a curved surface with an upward arrow (no text or symbols)

Шланг подачи воды

Diagram of a pipe being inserted into a bolt, showing fluid flow direction (no text or symbols)

Illustration of a tool using a pliers to apply material to a mechanical component (no text or symbols present)

Close-up of a metallic mechanical component with a cylindrical cap and threaded shaft (no visible text or symbols)

Illustration of two hands holding a magnifying glass over a circular object, no text or symbols present

Illustration of a hand pressing down on a mechanical component with a bolt, no text or symbols present

Illustration of a hand pouring liquid into a bolted nut (no text or symbols)

Таблица неполадок

Symbol of a trash bin crossed with a diagonal line, no text or numbers present