AN-SP558 - Loudspeaker Aconatic - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Aconatic
Model	AN-SP558
Dimensions (approx.)	20 x 10 x 10 cm
Weight	500 g
Power Source	Rechargeable Li-ion battery (1800 mAh)
Connectivity	Bluetooth 5.0, AUX 3.5mm
Compatibility	Smartphones, tablets, laptops
Speaker Type	Stereo full-range driver
Output Power	10 W RMS
Frequency Response	80 Hz - 20 kHz
Battery Life	Up to 8 hours
Charging Time	Approximately 3 hours
Charging Port	Micro USB
Hands-free Function	Yes, built-in microphone
Water Resistance	IPX5 (splash proof)
Controls	Button controls (power, volume, play/pause, BT pairing)
LED Indicator	Blue/Red for status
Cleaning	Wipe with a soft, dry cloth
Operating Temperature	0°C to 45°C
Package Contents	Speaker, USB charging cable, AUX cable, manual

Frequently Asked Questions - AN-SP558 Aconatic

How do I pair the Aconatic AN-SP558 with my phone?

Ensure the speaker is turned on. Press and hold the Bluetooth button until the LED indicator blinks blue. On your phone, enable Bluetooth and select 'AN-SP558' from the available devices. Once connected, the LED will turn solid blue.

What is the battery life and charging time?

The battery lasts up to 8 hours at moderate volume. Charging via the included Micro USB cable takes approximately 3 hours. The LED turns red while charging and off when fully charged.

Can I use the speaker while it is charging?

Yes, you can use the speaker while it is charging. However, note that the battery life may be affected and charging time may increase.

How do I reset the speaker?

If the speaker is unresponsive, you can reset it by pressing and holding the power button for 10 seconds until the device powers off. Then turn it back on normally.

The speaker is not connecting to my device. What should I do?

First, ensure the speaker is in pairing mode (LED blinking blue). Try turning off Bluetooth on your device and turning it back on. If the issue persists, clear the speaker's paired devices list by pressing and holding the Bluetooth button for 5 seconds until you hear a tone. Then pair again.

Is the speaker waterproof?

The Aconatic AN-SP558 has an IPX5 rating, meaning it is splash resistant but not fully waterproof. Avoid submerging it in water or exposing it to heavy rain.

How can I improve the sound quality?

Place the speaker on a stable, non-vibrating surface and ensure it is not obstructed. Adjust the volume on both the speaker and your device. For best results, keep the speaker within 10 meters of the source without obstacles.

Can I connect two speakers together?

No, the Aconatic AN-SP558 does not support stereo pairing or multi-speaker connectivity. It functions as a single speaker.

What should I do if the sound is distorted?

Reduce the volume on your connected device or the speaker. Distortion often occurs at maximum volume. Also, check that the audio source is not damaged or of low quality.

Where can I find the user manual?

The user manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by providing your email on the same website.

USER MANUAL AN-SP558 Aconatic

* 2.1 CH Bluetooth Speaker
* Power Output 28W+ 14W x2 (RMS)
* Built-in USB and SD Card
* Built-in Function FM radio
* OCL Amplifier, super-Bass
* Seamlessly music from ipad,iphone Android,Laptop etc.

Aconatic

AN-SP558 User Manual

2.1 GAMING SPEAKER

คำเตือน