AN-8000BT - Loudspeaker Aconatic - Free user manual and instructions
Find the device manual for free AN-8000BT Aconatic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Aconatic |
| Model | AN-8000BT |
| Product Type | Portable Bluetooth Speaker |
| Dimensions (W x H x D) | 7.5 x 3.2 x 3.2 inches (190 x 80 x 80 mm) |
| Weight | 1.1 lbs (500 g) |
| Power Supply | Built-in rechargeable Li-ion battery, 5V DC via micro USB |
| Battery Life | Up to 8 hours at moderate volume |
| Charging Time | Approximately 3 hours |
| Bluetooth Version | 5.0 |
| Bluetooth Range | Up to 33 ft (10 m) |
| Audio Output | 2 x 5W stereo speakers |
| Frequency Response | 80 Hz - 20 kHz |
| Supported Audio Formats | MP3, WMA, WAV, FLAC |
| Additional Functions | Hands-free calling, TF card slot, AUX input, FM radio |
| Controls | Power, Volume, Play/Pause, Next/Previous Track, EQ modes |
| Water Resistance | IPX5 (splash proof) |
| Cleaning | Wipe with a soft, dry cloth; do not use harsh chemicals |
| Safety | Keep away from extreme heat; do not disassemble; use only included charger |
| Spare Parts | Contact Aconatic support for replacement battery or USB cable |
| Repair | Repairs only by authorized service center; see warranty |
| General Information | Manufacturer: Aconatic; Model year: 2023; User manual available online |
Frequently Asked Questions - AN-8000BT Aconatic
How do I pair my phone with the AN-8000BT?
Turn on the speaker and enable Bluetooth on your phone. Search for Aconatic AN-8000BT in the Bluetooth settings and tap to pair. If prompted, enter the PIN 0000.
How long does the battery last?
The battery lasts up to 8 hours at moderate volume. Actual battery life may vary depending on volume level and audio content.
Can I use the speaker while charging?
Yes, you can use the speaker while it is connected to a power source. However, charging may be slower during use.
Is the speaker waterproof?
The speaker is rated IPX5, meaning it is splash-proof. It can withstand light rain or splashes, but should not be submerged in water.
How do I connect via AUX cable?
Plug a 3.5mm audio cable into the AUX input on the speaker and the other end into your device. The speaker will automatically switch to AUX mode. You can then adjust volume using the speaker or your device.
Why is the speaker not turning on?
Try charging the speaker for at least 30 minutes. If it still does not turn on, press and hold the power button for 10 seconds to reset. If the issue persists, contact Aconatic support.
How do I play music from a TF card?
Insert a microSD/TF card into the slot on the speaker. The speaker will automatically switch to TF card mode and start playing audio files supported (MP3, WMA, etc.). Use the buttons to control playback.
Can I use the speaker as a hands-free speakerphone?
Yes, when connected via Bluetooth, you can answer incoming calls by pressing the Play/Pause button. The speaker has a built-in microphone for hands-free conversations.
How do I reset the speaker to factory settings?
While the speaker is on, press and hold both the Volume+ and Play/Pause buttons for about 5 seconds. You will hear a confirmation sound, and the Bluetooth pairing information will be cleared.
What should I do if the sound is distorted?
Check that the volume on both the speaker and your device is not set too high. Try reducing the source volume or changing the EQ mode. Also, ensure the speaker is not placed in a corner or against a wall, as this can affect sound quality.
User questions about AN-8000BT Aconatic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual AN-8000BT - Aconatic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AN-8000BT by Aconatic.