AN-SP163 - Loudspeaker Aconatic - Free user manual and instructions
Find the device manual for free AN-SP163 Aconatic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker |
| Brand | Aconatic |
| Model | AN-SP163 |
| Color | Black |
| Dimensions (approx.) | 200 x 100 x 100 mm |
| Weight | 500 g |
| Power Source | Rechargeable lithium-ion battery (2000 mAh) |
| Charging Type | USB-C |
| Bluetooth Version | 5.0 |
| Wireless Range | 10 m (33 ft) |
| Speaker Output Power | 10 W |
| Frequency Response | 100 Hz - 20 kHz |
| Impedance | 4 ohms |
| Signal-to-Noise Ratio | >80 dB |
| Battery Life (playback) | Up to 8 hours |
| Standby Time | Up to 48 hours |
| Driver Unit | 1x 52 mm full-range |
| Built-in Microphone | Yes (hands-free calling) |
| Control Buttons | Volume +/-, Play/Pause, Next/Previous |
| Waterproof | No |
| Warranty | 1 year |
| Included Accessories | USB-C charging cable, AUX cable, user manual |
| Cleaning Instructions | Wipe with a dry, soft cloth |
| Safety Warnings | Do not expose to extreme temperatures or moisture |
Frequently Asked Questions - AN-SP163 Aconatic
How do I pair my device via Bluetooth?
Turn on the speaker and press the Bluetooth button. Enable Bluetooth on your device and select 'AN-SP163' from the list. If prompted, enter '0000' as the PIN.
What should I do if the speaker won't turn on?
Charge the speaker for at least 2 hours using the included USB-C cable. If it still doesn't turn on, try a different charging cable or reset the speaker by pressing the reset button (if available).
How long does the battery last on a full charge?
The battery lasts up to 8 hours of continuous playback at moderate volume. Standby time is up to 48 hours.
Can I use the speaker while it is charging?
Yes, you can use the speaker while it is plugged in to a power source. However, the battery may charge more slowly during use.
How should I clean the speaker?
Use a dry, soft cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Avoid getting moisture into the ports or driver.
Is this speaker waterproof?
No, the Aconatic AN-SP163 is not waterproof. Keep it away from liquids and moisture to prevent damage.
How do I reset the speaker to factory settings?
While the speaker is on, press and hold the Volume + and Volume - buttons simultaneously for about 5 seconds until you hear a tone. The speaker will turn off and reset.
Can I connect two speakers together?
This model does not support TWS (True Wireless Stereo) pairing. Each speaker operates independently over Bluetooth.
What type of charging cable does it use?
The speaker uses a standard USB-C charging cable. A cable is included in the box.
How do I update the firmware?
Firmware updates are not user-accessible for this model. If an update is required, contact Aconatic customer support for instructions.
User questions about AN-SP163 Aconatic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual AN-SP163 - Aconatic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AN-SP163 by Aconatic.
USER MANUAL AN-SP163 Aconatic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Aconatic
Model : AN-SP163
Category : Loudspeaker