AN-BT1200 - Loudspeaker Aconatic - Free user manual and instructions
Find the device manual for free AN-BT1200 Aconatic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Wireless Bluetooth Speaker |
| Brand | Aconatic |
| Model | AN-BT1200 |
| Connectivity | Bluetooth 5.0 |
| Bluetooth Range | Up to 10 m (33 ft) |
| Output Power | 5 W (maximum) |
| Frequency Response | 100 Hz - 20 kHz |
| Driver | 52 mm full-range driver |
| Battery Capacity | 1200 mAh Li-ion |
| Playback Time | Up to 6 hours (at 50% volume) |
| Charging Time | Approximately 2 hours |
| Charging Port | Micro USB |
| Dimensions (W × H × D) | 80 × 80 × 40 mm |
| Weight | 190 g |
| Controls | Power, Volume +/-, Play/Pause, Pairing |
| LED Indicators | Battery level and Bluetooth status |
| Water Resistance | IPX5 (splash-proof) |
| Maintenance | Keep away from extreme heat and moisture; store in a dry place |
| Cleaning | Use a soft, dry cloth; avoid liquid contact |
| Safety | Do not disassemble; use only approved charge adapter |
| Spare Parts & Repairability | Contact Aconatic support for replacement parts; service by authorized technicians only |
| Environmental Info | Dispose of in accordance with local e-waste regulations |
Frequently Asked Questions - AN-BT1200 Aconatic
How do I pair my Aconatic AN-BT1200 with my smartphone?
Turn on the speaker and press the pairing button to enter pairing mode. On your device, enable Bluetooth and select AN-BT1200 from the list. A tone confirms the connection.
How long does the battery take to charge and how long does it last?
The built-in 1200 mAh battery takes about 2 hours to fully charge and provides up to 6 hours of playback at moderate volume.
Can I use the speaker while it is charging?
Yes, you can play audio while the speaker charges. However, for optimal battery health, avoid frequent use during charging.
Is the Aconatic AN-BT1200 waterproof?
It has an IPX5 rating, meaning it is splash-proof from any direction. It cannot be submerged in water and should not be exposed to heavy rain.
How do I reset the speaker if it stops responding?
Press and hold the power button for 10 seconds to force a shutdown. Turn it on again normally. If the issue persists, charge for a few minutes before retrying.
What is the Bluetooth range of the speaker?
With Bluetooth 5.0, the effective range is up to 10 meters (33 feet) in open space. Walls and obstructions may reduce this range.
How can I clean the speaker safely?
Use a soft, dry cloth to wipe the exterior only. Do not use liquid cleaners or submerge the device. For ports, use a soft brush carefully.
Can I connect two AN-BT1200 speakers for stereo sound?
No, this model does not support TWS (True Wireless Stereo) pairing. Only one speaker can be connected to a source at a time.
Why is there no sound or the volume is very low?
Check that the volume is not muted on both the speaker and the source device. Ensure the device is paired and within range. If necessary, restart the speaker.
Where can I find replacement parts or service?
Contact Aconatic customer support for spare parts or authorized service. Attempting to open the device yourself voids the warranty.
User questions about AN-BT1200 Aconatic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual AN-BT1200 - Aconatic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AN-BT1200 by Aconatic.
USER MANUAL AN-BT1200 Aconatic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Aconatic
Model : AN-BT1200
Category : Loudspeaker