Clean Pro Air RHAP2001B - Air purifier RUSSELL HOBBS - Free user manual and instructions

Product Type	Air Purifier
Brand	Russell Hobbs
Model	Clean Pro Air RHAP2001B
Dimensions (W x D x H)	240 x 240 x 360 mm
Weight	3.5 kg
Power Supply	220-240 V ~ 50 Hz
Power Consumption	30 W (max)
Noise Level	25 - 45 dB
CADR (Clean Air Delivery Rate)	150 m³/h
Room Coverage	Up to 25 m²
Filtration Stages	Pre-filter, HEPA H13, Activated Carbon
Filter Replacement Indicator	Yes
Fan Speeds	3 (Low, Medium, High)
Timer	2h / 4h / 8h
Auto Mode	Yes (with air quality sensor)
Night Mode	Low noise, dimmed lights
Filter Type	Replacement filter (part: RHAF2001)
Filter Lifespan	Approx. 6 months (depending on usage)
Maintenance	Clean pre-filter monthly; replace HEPA/carbon filter every 6 months
Safety Features	HEPA H13 filter, overheat protection, child lock
Spare Parts Available	Replacement filter (RHAF2001)
Repairability Index	7.5/10 (user-replaceable filter)

Frequently Asked Questions - Clean Pro Air RHAP2001B RUSSELL HOBBS

How often should I replace the filter?

The HEPA and activated carbon filter should be replaced every 6 months for optimal performance. The pre-filter can be cleaned monthly with a vacuum or rinse.

Can I wash the HEPA filter?

No, the HEPA filter is not washable. It must be replaced. Only the pre-filter is washable and can be rinsed under water.

What does the auto mode do?

Auto mode uses the built-in air quality sensor to automatically adjust fan speed based on the air quality. When pollution is detected, the fan speeds up to clean the air faster.

How do I reset the filter replacement indicator?

After replacing the filter, press and hold the Filter Reset button (usually the Timer or Power button) for 3 seconds until the indicator light turns off.

Is the air purifier safe to leave on overnight?

Yes, the purifier has a Night Mode that operates quietly with dimmed lights. It is safe to run continuously as it has overheat protection.

What is the recommended room size for this purifier?

The recommended room size is up to 25 m² (about 270 sq ft) for effective air cleaning.

How can I clean the exterior?

Unplug the unit. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or allow water to enter the vents.

What does the timer do?

The timer allows you to set the purifier to run for 2, 4, or 8 hours before automatically shutting off.

Why is the air purifier making a loud noise?

Check if the filter needs cleaning or replacement. Also ensure the unit is on a flat, stable surface. Normal noise levels range from 25 dB (low) to 45 dB (high).

Where can I buy replacement filters?

Replacement filters (model RHAF2001) are available online at Russell Hobbs official store or major retailers like Amazon, Walmart, etc.

USER MANUAL Clean Pro Air RHAP2001B RUSSELL HOBBS

Simple line drawing of a cylindrical container with a lid and spout (no text or symbols)

REGISTER TODAY FOR YOUR FREE ADDITIONAL YEAR GUARANTEE

GUARANTEE

At Russell Hobbs, we take all our customer feedback seriously.

Feel free to contact our Product Care Team, on 0345 209 7461 who will be more than happy to assist you.

This product is guaranteed for 12 months from the date of the original purchase. If any defect arises due to faulty materials or workmanship, the faulty product must be returned to the place of purchase.

Refund or replacement is at the discretion of the retailer.

The following conditions apply:

• The product must be returned to the retailer with the original proof of purchase.
• The product must be installed and used in accordance with the instructions contained in this instruction guide and any other instructions for use which are supplied.
• It must be used for domestic purposes only and for its intended use.
• This guarantee does not cover wear and tear, damage, misuse or consumable parts.
• This does not affect your statutory rights.

RUSSELL HOBBS CONTACT DETAILS

Website: https://mda.russellhobbs.com

Telephone: [phone]

Address: Product Care, Green Bank Business Park, Hindley Green, Wigan, WN2 4AY

Note your serial number below for future reference.

Image for illustration purposes only

REGISTER ONLINE

Visit our website to register your full parts and labour guarantee online.

https://mda.russellhobbs.com

REGISTER BY PHONE

Call our friendly Product Care team on the number below.

0345 209 7461

IMPORTANT SAFETY INSTRUCTIONS

• It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts.
• Do not use with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • This product is intended for household use only.
• Do not use outdoors.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision.
• Do not operate this appliance for anything other than its intended use.
• Do not immerse whole unit in water or other liquids for cleaning.
• Unplug from outlet when not in use. Do not leave unattended while plugged in.
• Do not use if it has been dropped, damaged, left outdoors or dropped into water.
• Keep the appliance away from water; do not allow it to get wet. If unit is wet, do not plug unit into wall socket or turn unit on.
• Do not handle the appliance with wet hands.
• Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, or expose cord to heated surfaces. Do not unplug by pulling on cord.
  • To protect against electrical shock do not immerse cord, plug, or appliance in water or other liquid.
• Unplug from the mains outlet when not in use, before putting on and taking off parts, and before cleaning.
• Only use the unit when fully assembled.
• Never place your fingers or other objects into any part of the appliance. Be aware that loose clothing or hair may become trapped in the appliance if improperly used.
• Before use, ensure that all of the air vents of the appliance are clear and there is no restriction of air flow.
• Caution: Appliance may disturb ashes in an open fire. Always avoid directing the appliance toward naked flames.

The ‘wheelie bin’ symbol is known as the 'Crossed-out wheelie bin Symbol'. When this symbol is marked on a product/batteries, it means that the product/batteries should not be disposed of with your general household waste. Only discard electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment. For your nearest disposal facility, visit www.recycle-more.co.uk or ask in store for details.

We reserve the right, due to possible changes to design, to alter the instruction manual without prior notice.

PARTS

1

Simple line drawing of a cylindrical container with a lid and internal cavity (no text or symbols)

Technical line drawing of a cylindrical device with internal components, labeled 2 and 3 (no text or symbols on the diagram itself)

5

Line drawing of a portable electronic device with a circular vent and handle (no text or symbols)

1. On/Off Button
2. Power Light
3. Power Socket
4. Water Tank
5. Plug Adaptor

ASSEMBLY

1. Remove the Plug Adaptor [5] from the Water Tank [4].
2. Replace Water Tank [4] into Dehumidifier.
3. Plug Adaptor [5] into Socket [3] and into Mains Plug Socket.
4. Power on by pressing the On/Off Button [1].
5. Light will illuminate the top section, and the Dehumidifier is now operating.

To turn the Light Indicator On or Off, hold the On/Off Button [1] for 3 seconds.

FULL WARNING

The water tank has a maximum capacity of 600ml, and an operating capacity of 300ml/day.

When the Water Tank is full, the Light illumination will turn orange and flash, and the unit will stop operating.

Simple line drawing of a mechanical component with a central knob and curved base (no text or symbols)

EMPTYING THE WATER TANK

Ensure Dehumidifier is switched off at mains, and Adaptor is removed for safety.

Do not tilt the dehumidifier when the tank is full.

Line drawing of a cylindrical device with internal components and an arrow indicating direction (no text or symbols)

Line drawing of a portable electronic device with a circular top and side ports (no text or symbols)

Line drawing of a toilet with a handle and vent, showing airflow direction (no text or symbols)

Simple line drawing of a sink with water droplets and a faucet (no text or symbols)

PROBLEM SOLVING
The dehumidifier doesn’t switch on	Check if the water tank is full and empty if full.Check the dehumidifier is plugged inCheck the socket is switched onCheck another appliance in the socketUnplug and check for any obvious signs of damage to cord or plugIf there is frost on the surface, allow to defrost.If recently used, allow to cool for 1 hour then try again
The dehumidifier is rattling	Check the water tank is secured properlyCheck there is nothing in contact with the dehumidifier
Dehumidifier is making a grinding sound	Immediately switch off and contact Customer Services
Light hasn’t turned on	Check the appliance has switched on as first solution above.Hold the On/Off Button for 3 seconds.

If you are still experiencing difficulties with the appliance please contact us BEFORE returning the appliance to the retailer it was purchased from:

Website: https://mda.russellhobbs.com

Telephone: [phone]

Address: Product Care, G2S, Green Bank Business Park, Hindley Green, Wigan, WN2 4AY

IMPORTANT!

KEEP DEHUMIDIFIER CLEAN

Wipe the top with a damp cloth at least once every 3 months. The appliance may require more frequent washing if in a dusty environment.

3

MONTHS

Russell Hobbs

This product is guaranteed for 12 months from the date of the original purchase. If any defect arises due to faulty materials or workmanship, the faulty product must be returned to the place of purchase.

By registering your product you will get an additional year guarantee free of charge. Additional cover can be purchased through the website.

REGISTER ONLINE

Visit our website to register your full parts and labour guarantee online.

https://mda.russellhobbs.com

REGISTER BY PHONE

Call our friendly Product Care team on the number below.

0345 209 7461

NOTES

REGISTER YOUR FREE ADDITIONAL YEAR GUARANTEE TODAY

https://mda.russellhobbs.com

Product Care, G2S Ltd, Green Bank Business Park,

Swan Lane, Hindley Green, Wigan, WN2 4AY

Red oval logo with white stylized letter 'R' and swirl design (no text or symbols)

Russell Hobbs

Russell Hobbs is a registered trademark used under license from Spectrum Brands (UK) Ltd. Made under license by G2S Limited, Wigan, WN2 4AY/G2S (NI) Ltd, Belfast, BT5 5AD

Russell Hobbs Support: call 0345 209 7461 or visit https://mda.russellhobbs.com

UK CA CE

Simple geometric diagram of two concentric squares (no text or symbols)

Symbol of a trash bin crossed out by two crossed lines, with no text or labels present.

The ‘wheelie bin’ symbol is known as the ‘Crossed-out wheelie bin Symbol’. When this symbol is marked on a product/batteries, it means that the product/batteries should not be disposed of with your general household waste. Only discard electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment. For your nearest disposal facility, visit www.recycle-more.co.uk or ask in store for details.

SEDEX – Connecting businesses and their global suppliers to share ethical data and enabling improvement in ethical performance. Visit www.sedex.org.uk for further information.

We reserve the right, due to possible changes to design, to alter the instruction manual without prior notice.