Steam Genie 27220-56 - Iron RUSSELL HOBBS - Free user manual and instructions

Product type	Cordless iron
Brand	Russell Hobbs
Model	Steam Genie 27220-56
Power	2400 W
Water tank capacity	300 ml
Steam autonomy	About 30 seconds continuous
Heat-up time	35 seconds
Soleplate type	Ceramic soleplate
Steam functions	Variable steam, steam shot, vertical steam
Anti-calc system	Integrated
Auto shut-off	Yes, after 30 seconds without movement
Power cord	Cordless (base with 1.8 m cord)
Weight	1.2 kg
Dimensions (L × W × H)	30 × 13 × 18 cm
Power supply	220-240 V, 50/60 Hz
Included accessories	Charging base, measuring cup
Care and cleaning	Clean the soleplate with a damp cloth, descale regularly
Safety	Auto shut-off, non-slip base
Spare parts and repairability	Water tank and soleplate not user-replaceable

Frequently Asked Questions - Steam Genie 27220-56 RUSSELL HOBBS

How to use the Steam Genie cordless iron?

Place the iron on the charging base to heat up. Once the temperature is reached (indicator off), lift the iron and iron. For continuous steam, hold the steam button. Place the iron back on the base between uses.

How long does it take for the iron to heat up?

The heat-up time is approximately 35 seconds. The indicator turns off when the set temperature is reached.

How to fill the water tank?

Open the water tank cap located at the front of the iron. Use the provided measuring cup to pour tap or demineralized water. Do not exceed the max fill line (300 ml). Close the cap securely.

How to descale the Steam Genie iron?

Use the self-cleaning function: fill the tank halfway with water and a teaspoon of white vinegar. Heat the iron, then hold the self-clean button over a sink. Then rinse with clean water.

What to do if steam does not come out?

Check that the tank has enough water. If the iron is cold, it does not produce steam. The anti-calc system may be clogged: perform a descaling. If the problem persists, contact customer service.

How to clean the ceramic soleplate?

Let the iron cool down. Wipe the soleplate with a soft damp cloth. Do not use abrasives or chemicals. For stubborn residues, use a cloth soaked in diluted white vinegar.

Does the auto shut-off work in vertical position?

Yes, the auto shut-off activates if the iron remains stationary in vertical or horizontal position for about 30 seconds. An audible signal sounds before shutdown.

Can I use tap water?

Yes, you can use tap water. If the water is very hard, mix it with equal parts demineralized water to reduce deposits.

How to store the iron after use?

Turn off and unplug the base. Let the iron cool completely. Empty the remaining water from the tank. Store the iron on its base in a dry place.

Where can I find spare parts for this model?

Spare parts (base, tank, soleplate) are not available separately. In case of failure, contact Russell Hobbs customer service or an authorized center. The warranty covers manufacturing defects.

USER MANUAL Steam Genie 27220-56 RUSSELL HOBBS

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised/instructed and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children unless they are older than 8 and supervised. Use and store the appliance out of reach of children under 8 years.

Between uses, the steamer must be rested on a stable, level, heat-resistant surface.

Don't leave the appliance unattended while plugged in, or while it's resting between uses.

Unplug the appliance before filling, before cleaning, and after use.

Don't operate the appliance if it's dropped or damaged, or if it malfunctions or leaks.

If the cable is damaged, return the appliance in order to avoid a hazard.

Do not immerse in any liquid.

The surfaces of the appliance will get hot during use.

• Never use anything except water to fill or clean the appliance.
• Never steam clothing that is being worn.
• Never aim steam directly at people, animals or plants. Steam is hot and can cause serious burns and scalds if used without care.
• Never hold the steam head downwards while at rest, or tilt it backwards as this may cause hot water to be discharged and possible injury.
• Ensure the appliance is switched off and cooled down before fitting or removing attachments.
• Don't use the appliance for any purpose other than those described in these instructions.

HOUSEHOLD USE ONLY

PARTS

1. Steam trigger lock
2. Steam trigger
3. Handle
4. Water tank
5. Power button
6. Lint attachment
7. Delicate fabric attachment
8. Upholstery attachment

BEFORE USING FOR THE FIRST TIME

• Remove labels, stickers and packaging from the appliance.
• Read all instructions and warnings.

IMPORTANT INFORMATION

• For best performance, we recommend using distilled, purified or filtered water in your steamer. Tap water contains minerals that can build up inside your steamer over time and reduce its efficiency or even cause damage.
• Never use perfumes, oils or other additives.
• Always check the garment's care label before steaming, and always test fabrics for colourfastness in an inconspicuous area. Steamers are not recommended for use on leather, suede, vinyl, plastic, or other materials that are sensitive to steam.
• During use the steamer and accessories will become HOT. Never try to fit or remove attachments while still hot. • After preheating, prime the water pump by holding the steam trigger until steam forms.
• It is normal to feel or hear the water pump inside the device. It may become louder when the water level in the tank is low. Check and refill the tank when required.
• Small amounts of dripping might occur during use. If excessive, your steamer needs time to get back up to full temperature. Just allow the steamer a minute to reheat.
• Wearing clothes immediately after ironing or steaming can actually create wrinkles. Always allow the clothing to cool for about 5 minutes before wearing.

ATTACHMENTS

Your steamer has three attachments:

Lint attachment	Use on garments labelled 📄 that allow the use of steam.Tip: The pad on the attachment helps remove lint, hair, and animal fur.
Delicate fabric attachment	Use on garments labelled 📄 that allow the use of steam.Tip: For items with printing/embellishment, turn the garment inside out to avoid damage to sensitive areas.
Upholstery attachment Use to	to sanitise and refresh bedding, mattresses, curtains, plush toys, furniture, and hard surfaces (such as worktops or desks that are not heat sensitive).Always test for colourfastness and heat sensitivity on an inconspicuous area.

Fitting/Removing (Fig. A)

1. Make sure that the steamer and attachment are cool.
2. Hook the top of the attachment over the top edge of the steamer. Click the bottom edge into place. Make sure it is fully fitted and not loose or it may detach itself during use.
3. Remove the attachment using the tab. When removing the attachment, watch out for condensation that may have built up during use.

FILLING

1. Place the steamer on its base on a stable surface.
2. Pull out the removable water tank (Fig. B).
3. Gently open the rubber cover at the top of the tank.
4. Fill until the water reaches the "MAX" level mark on the side of the tank (Fig. C). Do not overfill. Close the rubber cover securely.
5. Dry off any excess water from the tank, then refit it into the base until it clicks.
6. To refill at any time during use, turn the steamer off by pressing the power button until the blue indicator light goes out, unplug from the outlet, and follow the above procedure.
7. After refilling, allow to reheat for 45 seconds and then prime the pump by holding the steam trigger until steam forms.

USING

• If the label says "do not iron" or shows this icon ✗, fit the delicate attachment and make sure to test on an inconspicuous area prior to steaming the entire garment.
• If the label says "do not steam" or shows this icon 📄, do not steam the garment.
• Hang the garment in an area that will not be affected or damaged by the heat and steam, such as on a shower curtain rail, or in an open doorway.
• Fit any attachment you wish to use.
• Plug the steamer in then press the power button. The blue power button light will slowly flash, indicating that the steamer is heating.
• After about 45 seconds the power light will stay on, indicating the steamer is preheated.
• Prime the water pump by holding steam trigger until steam forms.
• To generate steam, press the steam trigger. As long as the trigger is held, steam will emit from the steamer. When the trigger is released, the steam will stop.

- To generate a constant flow of steam without holding the trigger, press the steam trigger and then slide the steam trigger lock downwards. You can then release pressure on the steam trigger. To turn the steam off, press the trigger, slide the steam trigger lock upwards, then release the trigger.

1. With your free hand keep the fabric taut. Steam the garment with slow, downward strokes, keeping the head of the steamer in contact with the fabric.
2. When you have finished, press and hold the power button until the blue light goes out (about 3 seconds) and unplug.
3. Stand the steamer on its base and allow it to completely cool off before storing. To avoid mineral buildup, empty the tank after each use.

Auto shut off

Your steamer will automatically switch to auto shut-off mode after being left inactive for 15 minutes. The power button light will flash rapidly to indicate this. To resume steaming, press the steam trigger or power button and wait for your steamer to fully reheat.

CARE AND MAINTENANCE

1. Make sure steamer is off, unplugged and completely cool.
2. Wipe all surfaces with a clean damp cloth.
3. After the steamer has been thoroughly dried, turn it back on and lightly steam over an old cloth. This will help remove any residue left in the steam holes.
4. To avoid mineral buildup, empty the tank after each use.

Cleaning attachments

• Lint attachment: Wipe with damp cloth to clean.
• Delicate fabric attachment: Wash with cold water and small amounts of a gentle cleanser if needed. The fabric cannot be removed.
• Upholstery attachment: The fabric can be removed and hand washed with cold water and a gentle cleanser.

TROUBLESHOOTING

Problem Possible Cause Solution
The steamer is plugged in but not heating.	The auto shut-off has activated. Press the steam trigger or press the power button to activate the steamer.
Not enough steam or no steam is coming out of the steamer.	The steamer is not heated to full temperature.	Always allow steamer to preheat at least 45 seconds, or until the power button light stops flashing.
	There is not enough water in the water tank.	Fill the water tank.
	The water pump hasn’t been primed.	After preheating, always prime the water pump by holding the steam trigger until steam forms.
Discoloured water is coming through the holes and staining the fabric.	Residue has built up in the water tank.	Empty the water tank after each use. Only use distilled, filtered, or purified water.
	Perfumed or scented additives were used.	Never use perfumed or scented additives.
Steamer is leaking or spitting.	Steamer is not hot enough.	Allow the steamer to heat for about 45 seconds.
	Water tank is running low. Fill the water tank.	Water tank.

RECYCLING

To avoid environmental and health problems due to hazardous substances, appliances and rechargeable and non-rechargeable batteries marked with one of these symbols must not be disposed of with unsorted municipal waste. Always dispose of electrical and electronic products and, where applicable, rechargeable and non-rechargeable batteries, at an appropriate official recycling/collection point.

Fixation/Removal (Figure A)

FOR HOUSEHOLD USE ONLY

PARTS

CARE AND MAINTENANCE