CASA-10A - Pregnant Citronic - Free user manual and instructions
Find the device manual for free CASA-10A Citronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active PA Speaker |
| Brand | Citronic |
| Model | CASA-10A |
| Woofer Size | 10 inches |
| Tweeter Size | 1 inch |
| Amplifier Power | 200 W RMS |
| Frequency Response | 50 Hz - 20 kHz |
| Input Connectors | XLR, 1/4" Jack, RCA |
| Output Connectors | XLR Link Output |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Dimensions (H x W x D) | 520 x 310 x 300 mm |
| Weight | 12.5 kg |
| Enclosure Material | Plywood with PVC coating |
| Grille Material | Steel with acoustic foam |
| Pole Mount | 35 mm socket |
| Cooling | Convection |
| Protection Features | Overload, thermal, short circuit |
| Operating Temperature | 0°C to 40°C |
| Cleaning Instructions | Wipe with a dry, soft cloth; do not use solvents |
| Safety Instructions | Do not open, keep away from water and children |
| Spare Parts Availability | Contact Citronic or authorized service centers |
Frequently Asked Questions - CASA-10A Citronic
How do I connect a microphone to the CASA-10A?
Connect your microphone to the XLR input using a balanced XLR cable. Ensure the speaker is powered on and adjust the volume control for the channel.
Can I use the CASA-10A as a floor monitor?
Yes, the CASA-10A can be used as a wedge monitor. Position it on its side with the grille facing the performer.
What is the maximum SPL of the CASA-10A?
The maximum SPL is approximately 118 dB peak, depending on input signal and room conditions.
How do I eliminate humming noise from the speaker?
Ensure all audio cables are properly shielded and connections are tight. Avoid running audio cables parallel to power cables. Use balanced connections (XLR) when possible.
Can I daisy-chain multiple CASA-10A speakers?
Yes, use the XLR Link output to connect to the next speaker's input. Ensure total impedance and power constraints are respected.
What is the correct way to store the CASA-10A?
Store in a dry, cool place away from direct sunlight and extreme temperatures. Cover the speaker to protect from dust.
How often should I clean the speaker grille?
Clean the grille every few months with a soft brush or vacuum on low suction to remove dust and debris.
Is the CASA-10A compatible with Bluetooth?
No, the CASA-10A does not have built-in Bluetooth. Use an external Bluetooth receiver connected to the RCA or line input.
What power cable does the CASA-10A use?
It uses a standard IEC C13 power cord. Ensure the voltage matches your local supply (100-240 VAC).
Where can I find replacement parts for the CASA-10A?
Contact Citronic or an authorized service center for genuine replacement parts such as the power amplifier module or speaker drivers.
User questions about CASA-10A Citronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual CASA-10A - Citronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CASA-10A by Citronic.