SONANCE

Garden SGS Subwoofer - Pregnant SONANCE - Free user manual and instructions

Find the device manual for free Garden SGS Subwoofer SONANCE in PDF.

📄 9 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SONANCE Garden SGS Subwoofer - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Type Outdoor In-Ground Subwoofer
Brand Sonance
Model Garden SGS Subwoofer
Dimensions (H x W x D) 12.5 x 12.5 x 12.5 inches (32 x 32 x 32 cm)
Weight 15 lbs (6.8 kg)
Power Handling (RMS) 100 watts
Impedance 8 ohms
Frequency Response 35 Hz - 150 Hz
Sensitivity 90 dB SPL (1W/1m)
Driver Type 8-inch long-throw woofer
Enclosure Material UV-resistant composite
Grille Material Powder-coated aluminum
Low-Pass Crossover Variable, 40-120 Hz
Connection Cable 20 ft (6 m) direct burial cable
Color Black or Green
Usage Outdoor, in-ground installation
Weather Resistance IP66 rated
Warranty 5 years limited
Maintenance Clean with damp cloth; do not use harsh chemicals
Safety Do not expose to direct water spray; ensure proper grounding

Frequently Asked Questions - Garden SGS Subwoofer SONANCE

How do I connect the Garden SGS Subwoofer to my amplifier?
Connect the subwoofer's direct burial cable to your amplifier's subwoofer output using a compatible connector (e.g., banana plug or bare wire). Ensure the impedance matches (8 ohms) and set the low-pass crossover appropriately.
Can the subwoofer be buried completely underground?
Yes, the Garden SGS Subwoofer is designed for in-ground installation. It is weather-resistant with an IP66 rating and can be buried with the top grille flush with the ground. Ensure proper drainage around the enclosure.
What type of speaker wire should I use?
Use direct burial rated speaker wire with a gauge of 12-14 AWG for runs up to 50 ft. The included 20 ft cable is suitable for most installations.
Is the subwoofer waterproof?
It is weather-resistant but not fully submersible. The IP66 rating protects against heavy rain and splashes, but do not place it in areas prone to flooding or direct water spray from sprinklers.
How do I adjust the low-pass crossover?
The low-pass crossover is adjustable via a knob on the subwoofer's built-in crossover module. Turn it clockwise to increase the crossover frequency (up to 120 Hz) and counterclockwise to decrease (down to 40 Hz).
What is the recommended amplifier power?
Sonance recommends an amplifier providing 50-150 watts RMS per channel into 8 ohms. The subwoofer can handle up to 100 watts RMS.
Can I paint the subwoofer grille to match my landscape?
Yes, the powder-coated aluminum grille can be painted with outdoor-rated spray paint. Be careful not to block the driver's openings.
How do I maintain the subwoofer?
Periodically clean the grille and enclosure with a damp cloth. Remove any debris or dirt that may clog the grille. Do not use abrasive cleaners or pressure washers.
What is the maximum distance from the amplifier?
You can extend the distance using direct burial speaker wire up to 100 ft without significant signal loss. For longer runs, use a thicker gauge wire (12 AWG or lower).
Does the subwoofer come with a warranty?
Yes, the Sonance Garden SGS Subwoofer is covered by a 5-year limited warranty against defects in materials and workmanship.

User questions about Garden SGS Subwoofer SONANCE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Pregnant in PDF format for free! Find your manual Garden SGS Subwoofer - SONANCE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Garden SGS Subwoofer by SONANCE.

USER MANUAL Garden SGS Subwoofer SONANCE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SONANCE

Model : Garden SGS Subwoofer

Category : Pregnant