NTMTZH 822 FT - Freezer Hotpoint Ariston - Free user manual and instructions

Product Type	Freezer
Brand	Hotpoint Ariston
Model	NTMTZH 822 FT
Dimensions (H x W x D)	185 cm x 60 cm x 65 cm
Weight	72 kg
Power Supply	220-240 V, 50 Hz
Energy Class	A+
Annual Energy Consumption	280 kWh
Climate Class	SN-T
Noise Level	42 dB(A)
Net Capacity	245 L
Freezing Capacity	20 kg/24h
Storage Time During Power Failure	12 h
Fast Freeze Function	Yes
Door Alarm	Yes
Defrosting	Manual
Temperature Control	Mechanical
Number of Drawers	6
Door Reversible	Yes
Interior Light	Yes
Refrigerant	R600a
Spare Parts Availability	10 years
Cleaning	Regular interior cleaning with mild soap

Frequently Asked Questions - NTMTZH 822 FT Hotpoint Ariston

What is the ideal temperature for storing food in this freezer?

The recommended temperature is -18°C for long-term storage. Use the mechanical dial to adjust; usually a middle setting works.

How often should I defrost the freezer?

Defrost when ice buildup reaches about 5-10 mm. For manual defrost models like this, unplug, remove food, and let ice melt. Clean and dry before restarting.

Why is my freezer making unusual noises?

Normal sounds include compressor humming, refrigerant flow (gurgling), and clicking when the thermostat cycles. If loud or persistent, check leveling and clearance.

How can I save energy with this freezer?

Keep the door closed, avoid overfilling, let hot food cool before placing, and ensure proper ventilation around the appliance. Defrost regularly to maintain efficiency.

What should I do if the door alarm sounds?

If the door is left open, close it firmly. The alarm will stop. Check if anything prevents sealing, and clean the gasket if needed.

Can I reverse the door opening direction?

Yes, the door is reversible. Follow the instructions in the user manual to change hinges and handles. You may need tools and assistance.

How do I clean the freezer interior?

Unplug the appliance, remove all food and shelves, and clean with a mild detergent and warm water. Rinse and dry thoroughly. Avoid abrasive cleaners.

What is the storage time during a power failure?

Typically up to 12 hours if the door remains closed. The freezer is well insulated, but avoid opening during a blackout to keep food safe.

Where can I find spare parts for this model?

Hotpoint Ariston provides spare parts for up to 10 years. Contact authorized service centers or the official website, quoting the model number NTMTZH 822 FT.

How does the fast freeze function work?

Activate fast freeze 24 hours before adding large amounts of fresh food. It runs the compressor continuously to lower temperature quickly, then automatically returns to normal.

USER MANUAL NTMTZH 822 FT Hotpoint Ariston

Safety and warning information ____ 2
Control panel ____ 5
Description of the appliance ____ 7
First use and installation______ 8
Daily use ____ 12

Helpful hints and tips ____ 13
Cleaning and care ____ 14
What to do if ____ 14
Disposal of the appliance ____ 16

This appliance is in accordance with the following EU guidelines:

2006/95/EC and 2004/108/EC and 2009/125/EC and EC.643/2009.

Safety and warning information

Before using the appliance, read these safety instructions. Keep them nearby for future reference. These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inappropriate use of the appliance or incorrect setting of controls.

⚠️ Very young children (0-3 years) should be kept away from the appliance. Young children (3-8 years) should be kept away from the appliance unless continuously supervised. Children from 8 years old and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance only if they are supervised or have been given instructions on safe use and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.

PERMITTED USE

CAUTION: The appliance is not intended to be operated by means of an external switching device, such as a timer, or separate remote controlled system.

This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops,

offices and other working environments; farm houses; by clients in hotels, motels, bed & breakfast and other residential environments.

This appliance is not for professional use. Do not use the appliance outdoors.

⚠ The appliance is designed for operation in places where the ambient temperature comes within the following ranges, according to the climatic class given on the rating plate. The appliance may not work properly if it is left for a long time at a temperature outside the specified range.

Climatic Class Amb. T. (°C)

SN: Da 10 a 32 °C

ST: Da 16 a 38 °C

N: Da 16 a 32 °C

T: Da 16 a 43 °C

This appliance does not contain CFCs. The refrigerant circuit contains R600a (HC). Appliances with Isobutane (R600a): isobutane is a natural gas without environmental impact, but is flammable. Therefore, make sure the refrigerant circuit pipes are not damaged, especially when emptying the refrigerant circuit.

⚠ WARNING: Do not damage the appliance refrigerant circuit pipes.

⚠ WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

⚠ WARNING: Do not use mechanical, electric or chemical means other than those recommended by the Manufacturer to speed up the defrost process.

⚠ WARNING: Do not use or place electrical devices inside the appliance compartments if they are not of the type expressly authorised by the Manufacturer.

⚠ WARNING: Ice makers and/or water dispensers not directly connected to the water supply must be filled with potable water only.

⚠ WARNING: Automatic ice-makers and/or water dispensers must be connected to a water supply that delivers potable water only, with mains water pressure between 0.17 and 0.81 MPa (1.7 and 8.1 bar).

⚠ Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

⚠ Do not swallow the contents (non-toxic) of the ice packs (provided with some models). Do not eat ice cubes or ice lollies immediately after taking them out of the freezer since they may cause cold burns.

⚠ For products designed to use an air filter inside an accessible fan cover, the filter must always be in position when the refrigerator is in function.

⚠ Do not store glass containers with liquids in the freezer compartment since they may break.

⚠️ Do not obstruct the fan (if included) with food items.

After placing the food check that the door of the compartments closes properly, especially the freezer door.

⚠️ Damaged gaskets must be replaced as soon as possible.

⚠️ Use the refrigerator compartment only for storing fresh food and the freezer compartment only for storing frozen food, freezing fresh food and making ice cubes.

⚠️ Avoid storing unwrapped food in direct contact with internal surfaces of the refrigerator or freezer compartments. Appliances could have special

compartments (Fresh Food Compartment, Zero Degree Box, etc.). Unless specified in the specific booklet of product, they can be removed, maintaining equivalent performances.

⚠️ C-Pentane is used as blowing agent in the insulation foam and it is a flammable gas.

INSTALLATION

⚠️ The appliance must be handled and installed by two or more persons - risk of injury. Use protective gloves to unpack and install - risk of cuts.

⚠️ Installation, including water supply (if any) and electrical connections, and repairs must be carried out by a qualified technician. Do not repair or replace any part of the appliance unless specifically stated in the user manual. Keep children away from the installation site. After unpacking the appliance, make sure that it has not been damaged during transport. In the event of problems, contact the dealer or your nearest After-sales Service. Once installed, packaging waste (plastic, styrofoam parts etc.) must be stored out of reach of children - risk of suffocation. The appliance must be disconnected from the power supply before any installation operation - risk of electric shock. During installation, make sure the appliance does not damage the power cable - risk of fire or electric shock. Only activate the appliance when the installation has been completed.

⚠️ Be careful not to damage the floors (e.g. parquet) when moving the appliance. Install the appliance on a floor or support strong enough to take its weight and in a place suitable for its size and use. Make sure the appliance is not near a heat source and that the four feet are stable and resting on the floor, adjusting them as required, and check that the appliance is perfectly level using a spirit level. Wait at least two hours before switching the appliance on, to ensure that the refrigerant circuit is fully efficient.

⚠ WARNING: To avoid a hazard due to instability, positioning or fixing of the

appliance must be done in accordance with the manufacturer instructions. It is forbidden to place the refrigerator in such way that the metal hose of gas stove, metal gas or water pipes, or electrical wires are in contact with the refrigerator back wall (condenser coil). All dimensions and spacing needed for installation of the appliance are in the Installation instruction booklet.

ELECTRICAL WARNINGS

It must be possible to disconnect the appliance from the power supply by unplugging it if plug is accessible, or by a multi-pole switch installed upstream of the socket in accordance with the wiring rules and the appliance must be earthed in conformity with national electrical safety standards.

Do not use extension leads, multiple sockets or adapters. The electrical components must not be accessible to the user after installation. Do not use the appliance when you are wet or barefoot. Do not operate this appliance if it has a damaged power cable or plug, if it is not working properly, or if it has been damaged or dropped.

⚠️ If the supply cord is damaged, it must be replaced with an identical one by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard - risk of electric shock.

Control panel

The temperature control panel is located in the refrigerator chamber, on the right side wall. you can adjust the refrigerator and freezer temperature by press the button on the panel.

Freezer Temperature Setting

When the machine is not in the temperature setting mode, If you want to set the temperature inside the freezer, you can follow the two steps below:

1. Press "select" button, until the freezer light is on, and the LED indicator will indicate the current temperature setting in freezer.
2. Then you can set the temperature from -14°C to -22°C by pressing < and , press the button once, the temperature will increase or

decrease 1°C, and the LED indicator will turn down or turn up between “cold” and “colder”, until the required temperature is displayed. There is a corresponding relationship between temperature setting and indicator lights, you can find it out in the table below:

Fridge Temperature Setting	9°C 8°C	7°C 6°C	5°C 4°C	3°C	2°C 1°C
Freezer Temperature Setting	-14°C	-15°C	-16°C	-17°C	-18°C	-19°C	-20°C	-21°C	-22°C	fast freeze
indicator-1	half light	full light	full light	full light	full light	full light	full light	full light	full light	full light
indicator-2			half light	full light	full light	full light	full light	full light	full light	full light
indicator-3					half light	full light	full light	full light	full light	full light
indicator-4							half light	full light	full light	full light
indicator-5									half light	full light

Fast Freeze

The freezer compartment consist of 2 sections. One is the 4-star section and the other one is the 2-star section.

The temperature for 2-star section is always below -12^ , where the temperature for 4-star section is always below -18^ .

Diagram of two open industrial machines with circular components, no visible text or symbols

If you need the temperature inside the freezer to drop rapidly, press the FAST FREEZE button, all the LED indicator are full light, the freezer compartment will operate in FAST FREEZE mode for 24 hours, and the setting temperature is -23 °C. If you change the temperature setting, the fridge will exit FAST FREEZE mode.

FRIDGE TEMPERATURE

When the machine is not in the temperature setting mode, If you want to set the temperature inside the fridge, you can follow the two steps below:

1. Press "select" button, until the fridge light is on, and the LED indicator will indicate the current temperature setting in fridge.
2. Then you can set the temperature from 1°C to 9°C by pressing and, press the button once, the temperature will increase or decrease 1, and the LED indicator will turn down or turn up between "cold" and "colder", until the required temperature is displayed. There is a corresponding relationship between temperature setting and indicator lights, you can find it out in the same table upper.

ATTENTION: Normally we advise you setting the temperature on "Mid" position. A colder setting on the temperature regulator means more energy will be consumed. In FAST FREEZE mode the compressor will run continuously or even non-stop!

Changing the light bulb

Warning! If the LED light bulb is damaged, DO NOT CHANG IT BY THE USER!

Before changing the light bulb, either the refrigerator or disconnect the electricity leading into the refrigerator at the main power supply. Failure to do so could result in electrical shock or personal injury.

1. Remove the light cover.
2. Use the cross screw driver to take the screw out.
3. Pull out the joint cable, and take down the old LED light.
4. Replace with a new LED light that is same to the origin, screw the screw in.

Technical line drawing of a cabinet or storage unit with internal compartments and hanging components (no text or symbols)

Changing the light bulb carry out by inexperienced persons may cause injury or serious malfunctioning. It must be replaced by a qualified persons in order to avoid a hazard. Contact your local Service Force Center for help.

• Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
  ● To switch off the appliance.
• Unplug the mains plug.
• Press the bulb in the center with finger.

Description of the appliance

View of the appliance

1. Light cover
2. LED light (inside)
3. Screw hole cover
4. Wind channel part in freezer chamber
5. Shelf part
6. Ice tray part
7. Ice box
8. Light cover
9. LED light (inside)
10. Wind channel part in refrigerator chamber
11. Shelf part
12. Shelves assembly
13. Multifunctional drawer
14. Shelves assembly
15. Crisper box part
16. Roll wheel
17. Adjustable bottom feet part
18. Upper hinge cover
19. Door switch
20. Freezer door rack
21. Gasket part
    22.Middle hinge part
22. Shelf cover
23. Egg tray
24. Small shelf
25. Door switch
26. Refrigerator door rack(middle)
27. Gasket part
28. Refrigerator door rack(lower)

FREEZER

REFRIGERATOR

)

NM7

Note: Due to unceasing modification of our products your refrigerator may be slightly different from this Instruction Manual, but its functions and using methods remain the same.

First use and installation

Cleaning before use

- Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then dry thoroughly.

Installation Positioning

Warning! Before installing, read the instructions carefully for your safety and the correct operation of the appliance.

• Position the appliance away from sources of heat such as stoves, radiators, direct sunlight, etc.
  ● Maximum performance and safety are guaranteed by maintaining the correct indoor temperature for the class of unit concerned, as specified on the rating plate.

Important! It is necessary to have good ventilation around the refrigerator to allow for the dissipation of heat, high efficiency, and low power consumption. For this reason, sufficiently cleared space should be available around the refrigerator. It is advisable for there to be 75mm separating the back of the refrigerator to the wall at least 100mm of space on its two sides, a height of over 100mm from its top and a clear space in front to allow the doors to open 160°.

● Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the lower rear section of the appliance, as poor air circulation can affect performance. Built-in appliances should be positioned away from heat sources such as heaters and direct sunlight.

Leveling

- The appliance should be level in order to eliminate vibration. To make the appliance level, it should be upright and both adjusters should be in stable contact with the floor. You can also adjust the level by unscrewing the appropriate level adjustment in the front (use your fingers or a suitable spanner).

Electrical connection

Caution! Any electrical work required to install this appliance should be carried out by a qualified or authorized person.

Warning! This appliance must be grounded. The manufacturer declines any liability should these safety measures not be observed.

Installing the door handles

For the convenience of transportation, the door handles are separately provided in a plastic bag, you can install the door handles as follows.

1. Lever screw covers on the left side of the door, and then put them back to the plastic bag.

2. Match the handle on the left side of the door, keeping axes of screw holes in the handle and the door in a line, as the picture shows.

Diagram showing a hand holding a tool interacting with a vertical panel, with an arrow indicating direction (no text or symbols present)

1. Fix the handle with the special screws provided in the plastic bag. And then install the handle covers.

Reversing the door

The side at which the door opens can be changed, from the right side (as supplied) to the left side, if the installation site requires. Warning! When reversing the door, the appliance must not be connected to the mains. Ensure that the plug is removed from the mains socket.. Tools you will need

Note: Before you start lay the refrigerator on its back in order to it on soft foam packaging or similar material to avoid damaging the backboard of the refrigerator. To reverse the door, the following steps are generally recommended.

1. Stand the refrigerator upright. Open the upper door to take out all door racks (to avoid racks damaged) and then close the door.

1. Use a putty knife or thin-blade screwdriver to prize the screw hole cover which is at the top left corner of the refrigerator, and Unscrew the upper hinge cover which is at the top right corner of the refrigerator.

1. Unscrew the special flange self-tapping screws which are used for fixing the right upper hinge part by a 8mm socket driver or a spanner(please support the upper door with your hand when doing it).

1. Remove the upper door and place it on a smooth surface with its panel upwards. Lever part①and part④,then loose screws②, as shown in the picture. Change handle③ to the right side, then install screws②, part① and part④ in turn. Loose screws⑥, detach part⑤ then install part⑤to the left side with screws⑥.

1. Loose screws used to fix the middle hinge and remove middle hinge. Then remove the lower door.

Illustration showing a hand adjusting a metal bracket with arrows indicating movement, next to an open door (no text or symbols present)

1. Place the lower door on a smooth surface with its panel upwards. Change the handle to the right side according to step 4. Loose screws⑥, detach part⑤. Install part⑤ to corresponding position on left side together with screws⑥.

1. Change screw hole covers on middle cover plate from left to right (as shown in figure below).

Diagram of a mechanical or structural component with an arrow indicating direction (no text or symbols present)

1. Place refrigerator flatwise, remove part③, then loose screws④. Remove part ② and part①.

1. Screw out lower hinge, change it to the near hole site, and then screw up and mount washer.

2. Just remount to the step 8, change part① to left and part② to right and then fix them with screws④. Finally install part③.

1. Move the lower door and adjust its position to align lower hole site and upper hinge axis. Turn the middle hinge by 180, change the washer on the axis to the upper side, adjust the middle hinge to the appropriate position and then install it.

1. Transfer the upper door to the appropriate position. Secure the door's level; make the middle hinge axis into the lower hole of the upper door.

2. Transfer the upper hinge part (which is in the plastic bag) and make the upper hinge axis into the upper hole of the upper door, and adjust the position of the upper door (please support the upper door with your hand when doing it), fixing the upper hinge part with the special flange self-tapping screws.

1. Install the screw hole cover on the top right corner of the refrigerator. Install the upper hinge cover (which is in the plastic bag) on the left corner and screw it. Put the other upper hinge cover into the plastic bag.

1. Open the upper door and install the door shelves, then close it.

Warning!

When changing the side at which the door opens, the appliance must not be connected to the mains. Remove plug from the mains beforehand.

Daily use

Accessories 1)

Movable shelves/trays

● Various glass, plastic storage shelves or wire trays are included with your appliance.
● The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.

Positioning the door shelves

- To permit storage of food packages of various sizes, the middle door shelves can be placed at different heights.

Vegetable Drawer

● For storing fruit and vegetables.

Refrigerator compartment

- For storing the food which needs not being frozen and different part suitable for different kind of food.

Freezer food compartment 2)

- For freezing fresh food and storing frozen and deep-frozen food for a long time.

Thawing food 2)

• In the refrigerator compartment.
• At room temperature.

- In a microwave oven.

- In a conventional or fan oven.

● Food once thawed should be re-frozen only in exceptional cases.

1) If the appliance contains related accessories and functions.
2) If the appliance contains a freezer compartment.

Multifunctional Drawer

• In multifunctional drawer the temperature is Lower than the refrigerator compartment, sometimes the temperature even can be less than 0°C.
• For storing fish, meat and sausage for a short-term fresh.
• Don't store food that easily be frostbited, such as vegetable, fruits.

Ice-cube tray

● For making ice and storing ice-cubes.

● Ice Maker: Twist ice

Take out the ice making tray.

Fill the water in level of line.

Place the ice making tray in its original position.

When ice cubes are formed, clockwise twist the knob to drop off ice cubes into the icebox.

Notice:

Ice box is inadvisable to be used to make ice, otherwise it may crack. If it takes a long time to make ice, please do not hold the ice tray directly to avoid the ice tray sticking and hurting your hands.

Humidity Conditioning

● Deferent vegetable and fruits need deferent humidity, you can condition humidity in the crisper box.
- Adjust the humidity conditioning slide block

The humidity conditioning slide block is on the crisper box cover part.

Slide the block right or left, the size of the exit from which the air escape out will become larger or smaller.

Larger size of the exit means lower humidity in the crisper box. smaller size of the exit means higher humidity in the crisper box.

Helpful hints and tips

Noises during operation

Clicks- Whenever the compressor switches on or off, a click can be heard.

Humming- As soon as the compressor is in operation, you can hear it humming.

Bubbling- When refrigerant flows into thin tubes, you can hear bubbling or splashing noises.

Splashing- Even after the compressor has been switched off, this noise can be heard for a short time.

Energy saving tips

• Do not install the appliance near stoves, radiators or other sources of warmth.
• keep the time the appliance is open to a minimum.
• Do not set the temperature colder than necessary.
  ● Make sure the side plates and back plate of the appliance are at some distance from the wall, and follow the instructions relevant to installation.
• If the diagram shows the correct combination for the drawers, crisper and shelves, do not adjust the combination as it would produce effect on energy consumption.

Hints for fresh food refrigeration

• Do not store warm foods or evaporating liquids in the appliance.
• Do cover or wrap the food, particularly if it has a strong flavor.
• Position food so that air can circulate freely around it.

Hints for refrigeration

• Meat (all types): wrap in polyethylene (plastic) bags and place on the glass shelf above the vegetable drawer. For safety, store in this way only one or two days at the most.
• Cooked foods, cold dishes, etc...: these should be covered and may be placed on any shelf.Add bullet and move to the next line down.
• Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawer provided.

- Butter and cheese: these should be placed in aluminum foil or polyethylene (plastic) bags removing as much air as possible. Milk bottles: these should have a cap and should be stored in the bottle rack on the door.

Hints for freezing

• When first starting-up or after a period out of use. Before putting the food in the compartment let the appliance run at least 2 hours on the higher settings.
  ● Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible to subsequently thaw only the quantity required.
• Wrap up the food in aluminum foil or polyethylene (plastic) and make sure that packages are airtight.

• Do not allow fresh, unfrozen food to touch food that is already frozen, thus avoiding a rise in temperature of the latter.

• Iced products, if consumed immediately after removal from the freezer compartment, can possibly cause skin to become freezer burnt.

• It is recommended to label and date each frozen package in order to keep track of the storage time.

Hints for the storage of frozen food

● Make sure that the commercially frozen food was stored by the retailer.
- Once defrosted, foods deteriorate rapidly and can not be re-frozen.
- Do not exceed the storage period indicated by the food manufacturer.
Note: If the appliance contains related accessories and function.

Cleaning and Care

Cleaning and care

For hygienic reasons, the appliance interior, including interior accessories, should be cleaned regularly.

The appliance should be cleaned and maintained at least every two months.

Warning! Danger of electrical shock!

• The appliance should not be connected to the maimingowlearsupply
  Before cleaning, switch the appliance off and remove the plug from the main power supply, switch off, or shut off the circuit breaker or fuse.

Notice!

• Remove the food from the appliance before cleaning. Store them in a cool place and keep well covered.
• Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components.
  ● Hot vapor can lead to the damage of plastic parts.
• Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice from an orange peel, butyric acid, or cleansers that contain acetic acid. Do not allow such substances to come into contact with appliance parts.

• Do not use any abrasive cleansers.

• Clean the appliance and the interior accessories with a cloth and lukewarm water. Commercially available dish washing detergents may also be used.
  ● After cleaning, wipe with fresh water and a clean dish cloth.

• Accumulation of dust at the condenser increases energy consumption; clean the condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner.(Only for the outside-condenser product)
• Check the water drain hole on the rear wall of the refrigerator compartment.
• Clear a blocked drain hole with the aid of something like soft green peg, an be careful not to create any damage to the cabinet by sharp objects.
  ● After everything is dry, the appliance back into service.

Taking the appliance out of service

● Empty the appliance.
- Pull out the power plug.
- Clean thoroughly (see section: Cleaning and Care).
- Leave the door open to prevent odour.

What to do if...

Warning! Before trouble-shooting, disconnect the power supply. Only a qualified electrician of competent

person must carry out the trouble-shooting that is not in the manual.

Important!

Repairs to the appliance may only be performed by competent service engineers. Improper repairs can give rise to significant hazards for the user. If your appliance needs repairing, please contact your specialist dealer or your local Customer Service Center.

Problem Possible cause Solution
Appliance does not work.	Appliance is not switched on.	Switch on the appliance.
	Main plug is not plugged in or is loose.	Plug the appliance into the electrical socket.
	Fuse has blown or is defective.	Check fuse, replace if necessary.
	Outlet is defective.	Defective parts need to be repaired by an electrician.
Appliance cools too much.	Temperature is set too cold.	Turn the temperature regulator to a warmer setting temporarily.
The food is too warm.	Temperature is not properly adjusted.	Please refer “Initial Start Up” section.
	Door was open for an extended period.	Open the door only as long as necessary.
	A large quantity of warm food was placed in the appliance within the last 24 hours.	Turn the control panel to a colder setting temporarily.
	The appliance is near a heat source.	Please refer “installation location” section.
Interior lighting does not work.	Light bulb is defective.	Please look in the “changing the Light Bulb “section.
Heavy build-up of frost, possibly also on the door seal.	Door seal is not air-tight (possibly after reversing the door).	Carefully warm the leaking sections of the door seal with a hair dryer (on a cool setting). At the same time, shape the warmed door seal by hand so that it sits correctly.
Unusual noises.	Appliance is not level.	Readjust the feet.
	The appliance is touching the wall or other objects.	Move the appliance slightly.
	A component, e.g. a pipe, on the rear of the appliance is touching another part of the appliance or the wall.	If necessary, carefully bend the component out of the way.
The compressor does not start immediately after changing the temperature setting.	This is normal, no error has occurred.	The compressor starts after a period of time.

Disposal of the appliance

It is prohibited to dispose of this appliance in domestic household waste.

Packaging materials

Packaging materials with the recycle symbol are recyclable. Dispose of the packaging in a suitable waste collection recycle it.

Before disposal of the appliance.

1. Disconnect the main plug from the main socket.
2. Cut off the main cable and discard it.

Correct disposal of this product

This symbol on the product, or in its packaging, indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council, your household waste disposal service, or the shop where you purchased the product.

İçindekiler

Technical line drawing of a door with internal compartments and hanging fixtures (no text or symbols)

Diagram showing a hand holding a tool interacting with a vertical panel, with an arrow indicating direction (no text or symbols present)

Illustration showing hand positioning and door lock mechanism (no text or symbols)

Diagram of a mechanical component with an arrow indicating direction, no text or symbols present

20016 Pero (MI), Italy

Tel: [phone]

İthalatçı Firma:

Indesit Company Beyaz Eşya PAZARLAMA A.Ş.

Balmumcu Cad. Karahasan Sok.

No: 11, 34349 – Balmumcu Beşiktaş – İstanbul

Tel: [phone]

Faks: (0212) 212 95 59

Technical line drawing of a door with internal components and a hanging handle (no text or symbols)

FRIGORIFERO

Diagram showing a hand using a tool to adjust or install a mechanical component, with no visible text or symbols.

Illustration showing hands using a tool to adjust or install a wall-mounted component, next to a door with arrows indicating motion (no text or symbols)

Technical diagram of a mechanical component with an arrow indicating motion direction (no text or symbols)