MXV-0404-H2A-KIT - AV Extender WyreStorm - Free user manual and instructions

Product Type	AV Extender Kit (HDMI Matrix over HDBaseT)
Model	MXV-0404-H2A-KIT
Brand	WyreStorm
Inputs	4 x HDMI (Type A)
Outputs	4 x HDMI (Type A) via HDBaseT
Video Resolution	Up to 4K@60Hz 4:4:4 (18Gbps)
HDR Support	HDR10, Dolby Vision, HLG
Audio Formats	LPCM 7.1, Dolby TrueHD, DTS-HD Master Audio
Transmission Distance	Up to 100m (328ft) over CAT6a/7
Control Interfaces	IR, RS-232, TCP/IP, Web GUI
Power Supply	Input: 100-240V AC, 50/60Hz; Output: 24V DC, 2.71A
Power Consumption	65W (max)
Dimensions (Main Unit)	440 x 240 x 44 mm (rack-mountable, 1U)
Weight (Main Unit)	3.5 kg
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Humidity	10% to 90% RH (non-condensing)
Included Accessories	Power adapter, IR emitter/receiver, RS-232 cable, mounting brackets
Compliance	CE, FCC, RoHS
Warranty	2 years limited
Cleaning	Wipe with dry, soft cloth; do not use liquids or solvents
Safety	Do not open the device; risk of electric shock. Use only provided power adapter.
Repairability	No user-serviceable parts. Contact qualified service personnel.

Frequently Asked Questions - MXV-0404-H2A-KIT WyreStorm

What is the maximum resolution supported by the MXV-0404-H2A-KIT?

The extender supports up to 4K@60Hz 4:4:4 (18Gbps) with HDR10, Dolby Vision, and HLG.

How far can I transmit the HDMI signal?

Over a single CAT6a/7 cable, you can transmit up to 100 meters (328 feet).

Does the kit include both transmitter and receiver?

Yes, the MXV-0404-H2A-KIT includes the transmitter unit (matrix) and receiver units for each output.

Can I control the matrix remotely?

Yes, it supports IR, RS-232, TCP/IP, and web GUI control for flexible integration.

What audio formats are supported?

It supports LPCM 7.1, Dolby TrueHD, DTS-HD Master Audio, and other standard formats.

Is the device rack-mountable?

Yes, the main unit is 1U rack-mountable with included brackets.

What type of cable do I need for HDBaseT?

Use CAT6a or CAT7 shielded solid core cable for best performance.

Can I use the matrix with a 1080p display?

Yes, it is backward compatible with lower resolutions.

How do I reset the device to factory defaults?

Press and hold the reset button on the rear panel for 10 seconds using a paperclip.

What should I do if there is no video output?

Check cable connections, ensure the correct input is selected, verify EDID settings, and power cycle the device.

USER MANUAL MXV-0404-H2A-KIT WyreStorm

WyreStorm recommends reading through this document in its entirety to become familiar with the product's features prior to starting the callation process.

IMPORTANT! Installation Requirements

• Visit the product page to download the latest firmware, document version, additional documentation, and configuration tools.
• Read through the Wiring and Connections section for important wiring guidelines before creating or choosing premade cables.
• While this product supports CEC, WyreStorm cannot guarantee compatibility with all forms of CEC communication.

In the Box

4x MXV-0404-H2A-KIT Receivers

1 x AC Power Cord with EU pins

1 x AC Power Cord with US pins

1 x AC Power Cord with UK pins

1 x AC Power Cord with AU pins

1x IR Remote

4x IR Emitter

4x IR Receiver

1x IR Receiver for Matrix IR Ext.

2x Matrix Mounting Brackets with screws

8x Receiver Mounting Brackets with screws (2 per RX)

1x Quickstart Guide (this document)

Basic Wiring Diagram

graph TD
    A["Wireless Router"] -->|LAN Cat6a/7| B["AC 300/400/400/400"]
    B --> C["HDMI from source"]
    C --> D["Satellite Box"]
    D -->|HDMI from source| E["Blu-ray Player"]
    E --> F["AC Mains Power"]
    F --> G["Control System CAB-IR-LINK (Sold Separately)"]
    G --> H["Matrix Control Only"]
    H --> I["IR"]
    I --> J["IR"]
    J --> K["MT1"]
    K --> L["MT2"]
    L --> M["MT3"]
    M --> N["MT4"]
    N --> O["MT5"]
    O --> P["MT6"]
    P --> Q["MT7"]
    Q --> R["MT8"]
    R --> S["MT9"]
    S --> T["MT10"]
    T --> U["MT11"]
    U --> V["MT12"]
    V --> W["MT13"]
    W --> X["MT14"]
    X --> Y["MT15"]
    Y --> Z["MT16"]
    Z --> AA["MT17"]
    AA --> AB["MT18"]
    AB --> AC["MT19"]
    AC --> AD["MT20"]
    AD --> AE["MT21"]
    AE --> AF["MT22"]
    AF --> AG["MT23"]
    AG --> AH["MT24"]
    AH --> AI["MT25"]
    AI --> AJ["MT26"]
    AJ --> AK["MT27"]
    AK --> AL["MT28"]
    AL --> AM["MT29"]
    AM --> AN["MT30"]
    AN --> AO["MT31"]
    AO --> AP["MT32"]
    AP --> AQ["MT33"]
    AQ --> AR["MT34"]
    AR --> AS["MT35"]
    AS --> AT["MT36"]
    AT --> AU["MT37"]
    AU --> AV["MT38"]
    AV --> AW["MT39"]
    AW --> AX["MT40"]
    AX --> AY["MT41"]
    AY --> AZ["MT42"]
    AZ --> BA["MT43"]
    BA --> BB["MT44"]
    BB --> BC["MT45"]
    BC --> BD["MT46"]
    BD --> BE["MT47"]
    BE --> BF["MT48"]
    BF --> BG["MT49"]
    BG --> BH["MT50"]
    BH --> BI["MT51"]
    BI --> BJ["MT52"]
    BJ --> BK["MT53"]
    BK --> BL["MT54"]
    BL --> BM["MT55"]
    BM --> BN["MT56"]
    BN --> BO["MT57"]
    BO --> BP["MT58"]
    BP --> BQ["HDMI to display"]
    BQ --> BR["HDMI to display Mirrored to HDBaseT Output"]
    BR --> BS["HDMI to display Mirrored to HDBaseT Output"]

    subgraph MXV-0404-H2A-KIT (Receiver)
        direction TB
        direction LR
        direction UA
        direction UO
        direction VTA
        direction YTA
        direction XTA
        direction YTA
        direction ZTA
        direction XTA
        direction YTA
        direction XTA
        direction YTA
        direction XTA
        direction YTA
        direction XTA
        direction YTA
        direction XTA
        direction YTA
        direction XTA
        direction YTA
        direction XTA
        direction YTA
        direction XTA
        direction YTA
        direction XTA
        direction YTA
        direction XTA
        direction YTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction XTA
        direction TB
        direction UO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction TB
        direction UO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction TB
        direction UO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction TB
        direction UO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction TB
        direction UO
        direction YO
        direction XO
        direction YO
        direction XO
        direction YO
        direction TB
    end

    subgraph MXV-0404-H2A-KIT (Matrix)
            direction TB
            direction UO
            direction YO

    subgraph MODEs: MXV-0404-H2A-KIT (Receiver)
            subgraph MODEs: MXV-0404-H2A-KIT (Receiver)
            subgraph MODEs: MXV-0404-H2A-KIT (Matrix)
            subgraph MODEs: MXV-0404-H2A-KIT (Matrix)
            subgraph MODEs: MXV-0404-H2A-KIT (Matrix)
            subgraph MODEs: MXV-0404-H2A-KIT (Matrix)
            subgraph MODEs: MXV-0404-H2A-KIT (Matrix)
            subgraph MODEs: MXV-0404-H8A-KIT (Matrix)
            subgraph MODEs: MXV-0404-H8A-KIT (Matrix)
            subgraph MODEs: MXV-0404-H8A-KIT (Matrix)
            subgraph MODEs: MXV-0404-H8A-KIT (Matrix)
            subgraph MODEs: MXV-0404-H8A-KIT (Matrix)
            subgraph MODEs: MXV-100-H8A-KIT (Matrix)
            subgraph MODEs: MXV-100-H8A-KIT (Matrix)
            subgraph MODEs: MXV-100-H8A-KIT (Matrix)
            subgraph MODEs: MXV-100-H8A-KIT (Matrix)
            subgraph MODEs: MXV-100-H8A-KIT (Matrix)
            subgraph MODEs: MXV-101-H8A-KIT (Matrix)
            subgraph MODEs: MXV-101-H8A-KIT (Matrix)
            subgraph MODEs: MXV-101-H8A-KIT (Matrix)
            subgraph MODEs: MXV-101-H8A-KIT (Matrix)
            subgraph MODEs: MXV-101-H8A-KIT (Matrix)
            subgraph MODEs: MXV-102-H8A-KIT (Matrix)
            subgraph MODEs: MXV-102-H8A-KIT (Matrix)
            subgraph MODEs: MXV-102-H8A-KIT (Matrix)
            subgraph MODEs: MXV-102-H8A-KIT (Matrix)
            subgraph MODEs: MXV-102-H8A-KIT (Matrix)
            subgraph MODEs: MXV-103-H8A-KIT (Matrix)
            subgraph MODEs: MXV-103-H8A-KIT (Matrix)
            subgraph MODEs: MXV-103-H8A-KIT (Matrix)
            subgraph MODEs: MXV-103-H8A-KIT (Matrix)
            subgraph MODEs: MXV-103-H8A-KIT (Matrix)
            subgraph MODEs: MXV-104-H8A-KIT (Matrix)
            subgraph MODEs: MXV-104-H8A-KIT (Matrix)
            subgraph MODEs: MXV-104-H8A-KIT (Matrix)
            subgraph MODEs: MXV-104-H8A-KIT (Matrix)
            subgraph MODEs: MXV-104-H8A-KIT (Matrix)
            subgraph MODEs: MXV-105-H8A-KIT (Matrix)
            subgraph MODEs: MXV-105-H8A-KIT (Matrix)
            subgraph MODEs: MXV-105-H8A-KIT (Matrix)
            subgraph MODEs: MXV-105-H8A-KIT (Matrix)
            subgraph MODEs: MXV-105-H8A-KIT (Matrix)
            subgraph MODEs: MXV-106-H8A-KIT (Matrix)
            subgraph MODEs: MXV-106-H8A-KIT (Matrix)
            subgraph MODEs: MXV-106-H8A-KIT (Matrix)
            subgraph MODEs: MXV-106-H8A-KIT (Matrix)
            subgraph MODEs: MXV-107-H8A-KIT (Matrix)
            subgraph MODEs: MXV-107-H8A-KIT (Matrix)
            subgraph MODEs: MXV-107-H8A-KIT (Matrix)
            subgraph MODEs: MXV-107-H8A-KIT (Matrix)
            subgraph MODEs: MXV-108-H8A-KIT (Matrix)
            subgraph MODEs: MXV-108-H8A-KIT (Matrix)
            subgraph MODEs: MXV-108-H8A-KIT (Matrix)
            subgraph MODEs: MXV-108-H8A-KIT (Matrix)
            subgraph MODEs: MXV-109-H8A-KIT (Matrix)
            subgraph MODEs: MXV-109-H8A-KIT (Matrix)
            subgraph MODEs: MXV-109-H8A-KIT (Matrix)
            subgraph MODEs: MXV-110-H8A-KIT (Matrix)
            subgraph MODEs: MXV-110-H8A-KIT (Matrix)
            subgraph MODEs: MXV-110-H8A-KIT (Matrix)
            subgraph MODEs: MXV-110-H8A-KIT (Matrix)
            subgraph MODEs: MXV-111-H8A-KIT (Matrix)
            subgraph MODEs: MXV-111-H8A-KIT (Matrix)
            subgraph MODEs: MXV-111-H8A-KIT (Matrix)
            subgraph MODEs: MXV-112-H8A-KIT (Matrix)
            subgraph MODEs: MXV-112-H8A-KIT (Matrix)
            subgraph MODEs: MXV-112-H8A-KIT (Matrix)
            subgraph MODEs: MXV-113-H8A-KIT (Matrix)
            subgraph MODEs: MXV-113-H8A-KIT (Matrix)
            subgraph MODEs: MXV-113-H8A-KIT (Matrix)
            subgraph MODEs: MXV-113-H8A-KIT (Matrix)
            subgraph MODEs: MXV-114-H8A-KIT (Matrix)
            subgraph MODEs: MXV-114-H8A-KIT (Matrix)
            subgraph MODEs: MXV-114-H8A-KIT (Matrix)
            subgraph MODEs: MXV-115-H8A-KIT (Matrix)
            subgraph MODEs: MXV-115-H8A-KIT (Matrix)
            subgraph MODEs: MXV-115-H8A-KIT (Matrix)
            subgraph MODEs: MXV-116-H8A-KIT (Matrix)
            subgraph MODEs: MXV-116-H8A-KIT (Matrix)
            subgraph MODEs: MXV-116-H8A-KIT (Matrix)
            subgraph MODEs: MXV-117-H8A-KIT (Matrix)
            subgraph MODEs: MXV-117-H8A-KIT (Matrix)
            subgraph MODEs: MXV-117-H8A-KIT (Matrix)
            subgraph MODEs: MXV-118-H8A-KIT (Matrix)
            subgraph MODEs: MXV-118-H8A-KIT (Matrix)
            subgraph MODEs: MXV-118-H8A-KIT (Matrix)
            subgraph MODEs: MXV-119-H8A-KIT (Matrix)
            subgraph MODEs: MXV-119-H8A-KIT (Matrix)
            subgraph MODEs: MXV-120-H8A-KIT (Matrix)
            subgraph MODEs: MXV-120-H8A-KIT (Matrix)
            subgraph MODEs: MXV-120-H8A-KIT (Matrix)
            subgraph MODEs: MXV-121-H8A-KIT (Matrix)
            subgraph MODEs: MXV-121-H8A-KIT (Matrix)
            subgraph MODEs: MXV-122-H8A-KIT (Matrix)
            subgraph MODEs: MXV-122-H8A-KIT (Matrix)
            subgraph MODEs: MXV-123-H8A-KIT (Matrix)
            subgraph MODEs: MXV-123-H8A-KIT (Matrix)
            subgraph MODEs: MXV-124-H8A-KIT (Matrix)
            subgraph MODEs: MXV-124-H8A-KIT (Matrix)
            subgraph MODEs: MXV-125-H8A-KIT (Matrix)
            subgraph MODEs: MXV-125-H8A-KIT (Matrix)
            subgraph MODEs: MXV-126-H8A-KIT (Matrix)

Wiring and Connections

WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in its entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment.

IMPORTANT! Wiring Guidelines

• The use of patch panels, wall plates, cable extenders, kinks in cables, and electrical or environmental interference will have an adverse effect on signal transmission which may limit performance. Steps should be taken to minimize or remove these factors completely during installation for best results.
• WyreStorm recommends the use of shielded category cable to minimize signal noise and interference.
• WyreStorm recommends using pre-terminated HDMI cables due to the complexity of these connector types. Using pre-terminated cables will ensure that these connections are accurate and will not interfere with the performance of the product.

IR TX/RX Guidelines

• Using WyreStorm infrared emitters and receivers is the best way to ensure that most IR coding formats are transmitted and received by the NetworkHD system. Other 3rd party emitters and receivers can be used; however, these devices must operate in the same manner as the WyreStorm devices.
• Due to differences in IR across 3rd party control systems their IR ports should never be connected directly to a NetworkHD system as an incompatibility may exist. WyreStorm offers a cable that compensates for voltage differences as well adjusts for differences in the pins used within the port. Refer to the CAB-IR-LINK product page for more information.

Cat6 Cable Performance Guide

0m	10m	20m	30m	40m	50m	60m	70m	80m	90m	100m
0ft	32ft	65ft	98ft	131ft	164ft	197ft	230ft	262ft	295ft	328ft

WyreStorm recommends the use of shielded cable to minimize signal noise and interference

IR TX Port Pinout

Connection for IR TX (transmit) uses a 3.5mm (1/8in) mono plug.

IR RX Port Pinout

Connection for IR RX (receive) uses a 3.5mm (1/8in) stereo jack that outputs +5V DC to power the included IR receiver.

RS-232 Wiring

Most control systems and computers are DTE where pin 2 is RX, this can vary from device to device. Refer to the documentation for the connected device for pin functionally to ensure that the correct connections can be made.

Matrix RS-232 Port

WyreStorm Connector			3rd Party Device
Pin 2	TX (Transmit) ---> To ---> RX (Receive)
Pin 3	RX (Receive) ---> To ---> TX (Transmit)
Pin 5	G (Ground) ---> To ---> G (Ground)

Note: Pins not shown in table have no connection.

Receiver (RX) RS-232 Port

WyreStorm Connector			3rd Party Device
Pin 1	TX (Transmit) ---> To ---> RX (Receive)
Pin 2	RX (Receive) ---> To ---> TX (Transmit)
Pin 3	G (Ground) ---> To ---> G (Ground)

Audio Wiring

This matrix contains audio connections for Analog Audio as well as S/PDIF digital.

Analog Audio

S/PDIF Digital Coax Audio

Setup and Configuration

EDID Settings

EDIDs can be configured to resolve issues with video output on displays that may not accept the maximum resolution available from the source.

• When set to Smart EDID (default) the matrix will scan all selected displays for the lowest resolution to dynamically adjust the source content to allow output on 2K and 4K displays sharing the same source.
• When EDID Copy or a direct EDID is being used, SmartEDID is turned Off.
• Ensure that a display is connected and powered On to the selected output before copying EDIDs or the copy will fail. When this occurs, EDID will be set to 4K@30Hz 2ch.
• Power to the matrix must be cycled (Off/On) after changing dip switches in order for the setting to take effect.

Copying EDIDs

1. Set the EDID dipswitch to the Front Panel, Web UI or API EDID Control (all switches up).
2. Reboot the matrix.
3. Using the front navigation buttons, select the input port for the output. Example: Input 2 for Output 2
4. Once the output port indicator blinks, press and hold Enter for 5 seconds. OK indicates that the copy was successful, FAIL indicates that the copy failed.
5. Reboot the matrix

SmartEDID/Front Panel/Web UI 4K UHD 1080p
Smart EDID-Display Lowest Resolution2ch only (default)		4K@60Hz 2.0ch with HDR 1080p@60Hz 2.0ch
Front Panel, Web UI or API EDID Control (EDID Copy)		4K@30Hz 7.1ch with HDR
	4K@30Hz 5.1ch with HDR
	4K@30Hz 2.0ch with HDR
	4K@30Hz/8bit only 2.0ch without HDR

Accessing the Web UI

This matrix is set to a default static IP Address (192.168.11.143). In order to communicate with it initially the PC must be set to a 192.168.11.xxx address with a subnet of 255.255.0.0. This can be changed back once a static IP is set within a different range.

1. Connect the matrix to the same network as a PC.
2. Open a web browser and enter the IP Address of the matrix. Default: 192.168.11.143 | Password: admin

Note: The installer password and general password are the same by default. WyreStorm recommends changing the password for installer login to avoid any unwanted changes being made to the matrix configuration.

Troubleshooting

No or Poor Quality Picture (snow or noisy image)

• Verify that power is being supplied to the transmitter and receiving device
• Verify that all HDMI and HDBaseT connections are not loose and are functioning properly
• Verify that the HDBaseT cable is properly terminated following EIA568B standard
• Verify that the output resolution of the source and display is supported by this matrix and receiver.
• If transmitting 3D or 4K, verify that the HDMI cables used are 3D or 4K rated.

No or Intermittent 3rd party Device Control

- Verify that the IR and RS-232 cables are properly terminated following the Wiring and Connections section.

Troubleshooting Tips:

- WyreStorm recommends using a cable tester or connecting the cable to other devices to verify functionality.

Specifications

	Matrix Receiver
Audio and Video
Inputs 4x HDMI In: 19-pin type A 1x HDBT In: 8-pin RJ-45 Female
Outputs	4x Audio Out: RCA Female Stereo (L/R)4x S/PDIF Out: RCA Female4x HDBT Out: 8-pin RJ-45 Female	1x HDMI Out: 19-pin type A
Output Video Encoding HDBaseT Class B
Encoding Data Rate 9.2Gbps
End to End Latency (Max) 10μs (micro seconds)
Audio Formats	Analog: 2ch Analog | S/PDIF: 2ch LPCM | Dolby Digital/DTS up to 5.1chHDMI: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X
Video Resolutions (Max)	Video Resolution HDMI Cat6 Cat6a/7
	1920x1080p @60Hz 12bit 15m/49ft 60m/197ft 70m/230ft
	1920x1080p @60Hz 16bit 7m/23ft 35m/115ft 40m/131ft
	3840x2160p @24Hz 10bit 4:2:0 HDR 3m/10ft 35m/115ft 40m/131ft
	3840x2160p @30Hz 8bit 4:4:4	7m/23ft Input15m/49ft Output35m/115ft 40m/131ft
	3840x2160p @60Hz 10bit 4:2:0 HDR 3m/10ft 35m/115ft 40m/131ft
	4096x2160p @60Hz 8bit 4:2:0 7m/23ft 35m/115ft 40m/131ft
	4096x2160p @60Hz 8bit 4:4:4 3m/10ft 35m/115ft 40m/131ft
	Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference
Supported Standards	DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
Maximum Pixel Clock	HDMI: 600MHz | HDBaseT: 297MHz
Communication and Control
HDMI	HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)
HDBaseT	HDMI 2.0 | HDCP 2.2 | EDID | CEC | 1-way PoH | Bidirectional IR
CEC	CEC power triggering for connected screens – Requires CEC compatibility
IR	1x IR Ext: 3.5mm (1/8in) TRS Stereo4x IR RX: 3.5mm (1/8in) TRS Stereo4x IR TX: 3.5mm (1/8in) TS MonoBidirectional over HDBaseT	1x IR TX: 3.5mm (1/8in) TS Mono1x IR RX: 3.5mm (1/8in) TRS StereoBidirectional over HDBaseT
RS-232	1x RS-232: 9-pin DB9 Female	1x RS-232: 3-pin Terminal Block - 3.5mm
Ethernet	1x LAN: 8-pin RJ-45 Female	N/A
Power
Power Supply	100~240V AC 50/60Hz	18V DC (Optional)
PoH	1-way Matrix to Receiver
Max Power Consumption	85W with 4 RXs connected via PoH	8W with External PSU each receiver12.5W via PoH each receiver
Environmental
Operating Temperature	0 to +45°C (32 to +113 °F), 10% to 90%, non-condensing
Storage Temperature	-20 to +70°C (-4 to +158 °F), 10% to 90%, non-condensing
Maximum BTU/hr	290 BTU/hr	28 BTU/hr with External PSU each receiver43 BTU/hr via PoH each receiver
Dimensions and Weight
Rack Units/Wall Box	1U	<1U
Height	43.5mm/1.72in	15.2mm/0.6in
Width	440mm/17.33in	136.4mm/5.38in
Depth	300mm/11.82in	74.2mm/2.93in
Weight	4.06kg/8.93lbs	0.24kg/0.53lbs
Regulatory
Safety and Emission	CE | FCC | RoHS | RCM

Note: WyreStorm reserves the right to change product specification, appearance or dimensions of this product at any time without prior notice.

Warranty Information

WyreStorm Technologies LLC warrants that its products to be free from defects in material and workmanship under normal use for a period of five (5) years from the date of purchase. Refer to the Product Warranty page on wyrestorm.com for more details on our limited product warranty.