THOR 800 WA - Washing machine WALTHAM - Free user manual and instructions

Product Type	Freestanding Washing Machine
Brand	Waltham
Model	THOR 800 WA
Dimensions (H x W x D)	85 cm x 60 cm x 60 cm
Weight	Approximately 70 kg
Energy Class	A+
Spin Speed	800 rpm
Capacity	6 kg
Water Consumption (per cycle)	Approx. 50 liters
Noise Level (Wash/Spin)	60 dB / 75 dB
Power Supply	220-240V ~ 50Hz, 10A
Number of Programs	15
Key Functions	Cotton, Synthetics, Delicates, Quick Wash, Wool, Rinse & Spin, Drum Clean
Additional Features	Delay Start (up to 24h), Child Lock, Overflow Protection, Unbalance Control
Display	LED Segment Display
Drum Material	Stainless Steel
Adjustable Feet	Yes
Hose Length (Inlet/Drain)	1.5 m / 1.5 m
Safety Features	Thermal Cut-off, Water Leakage Sensor, Door Lock
Maintenance	Clean lint filter, detergent drawer, door seal; descale periodically
Spare Parts Availability	Service outlets, online stores (motor, pump, belt, PCB, door lock)

Frequently Asked Questions - THOR 800 WA WALTHAM

How do I install the THOR 800 WA washing machine?

Ensure the machine is on a stable, level surface. Connect the inlet hose to a cold water tap (3/4 inch). Attach the drain hose to a standpipe or sink outlet. Plug into a grounded outlet (220-240V). Remove transport bolts before first use.

What is the maximum spin speed of this model?

The Waltham THOR 800 WA has a maximum spin speed of 800 rpm, which is suitable for delicate fabrics and helps reduce wrinkling.

How do I use the child lock feature?

Press and hold the Child Lock button (usually indicated by a padlock icon) for 3 seconds to activate. The display shows a lock symbol. Repeat to deactivate.

Why is the machine not draining water?

Check the drain hose for kinks or clogs. Clean the lint filter located at the bottom front of the machine. Ensure the drain pump is not blocked by small objects.

Can I wash wool or silk in this machine?

Yes, the machine has a Wool and Delicates program. Use suitable detergent and select low spin speed (400-600 rpm) for best results.

How often should I clean the detergent drawer?

Clean the drawer every 2-3 months to prevent mold and detergent buildup. Remove the drawer, wash with warm water, and dry before reinserting.

What do I do if the machine vibrates excessively?

Ensure the machine is leveled by adjusting the feet. Check that transport bolts are removed. Avoid overloading and distribute laundry evenly in the drum.

Is there a delay start function?

Yes, you can set a delay start of up to 24 hours. Select the program, then press the Delay button and set the desired delay time.

Where can I find spare parts for the THOR 800 WA?

Spare parts are available from authorized Waltham service centers or online retailers. Common parts include drain pump, door lock, and drive belt.

How do I clean the drum for better hygiene?

Run the Drum Clean program (if available) or a hot wash (90°C) with a cup of white vinegar or a drum cleaner tablet. This removes limescale and odors.

USER MANUAL THOR 800 WA WALTHAM

Abstract black curved arrow and circular shape on white background (no text or symbols)

Fig. 1

Close-up of a black mechanical component with a circular hole and a separate arrow-shaped object (no text or symbols visible)

Fig. 2

Abstract black-and-white graphic with a circular shape and arrow, no text or symbols present.

Fig. 3

REGLAGE DES PIEDS

Close-up of a mechanical component with a cylindrical base and a small metallic part attached (no visible text or symbols)

Fig.4

Close-up of a mechanical component with a cylindrical base and a curved arrowhead, no visible text or symbols.

Fig.5

RACCORDEMENT ELECTRIQUE

Close-up of a car's wheel and dashboard with a hand holding a camera (no visible text or symbols)

Fig.6

Illustration of a hand holding a small object with floating objects above, set against a pixelated grid background (no text or symbols)

Fig. 7

RACCORDEMENT DU TUYAU DE VIDANGE

Line drawing of a washing machine with a side sink and a hand holding a stand (no text or symbols)

Fig. 8

Diagram showing a car interior with a camera and a 3D map outline (no text or labels)

Fig. 10

Illustration of a hand holding a small mechanical component, no text or symbols present

Fig.11

FILTRE DE POMPE DE VIDANGE

Line drawing of a hand holding a small object, possibly a tool or component, with no visible text or symbols.

Fig. 12

Line drawing of a hand fastening a mechanical ring component (no text or symbols)

Fig. 13

BAC A PRODUITS

Simple line drawing of a hand pressing down on a wall with control panel and buttons (no text or symbols)

Fig 14