CC-6600E - Dashboard camera CLARION - Free user manual and instructions

Product Type	Dashboard Camera
Brand	Clarion
Model	CC-6600E
Dimensions	Approx. 100 x 50 x 30 mm
Weight	Approx. 100 g
Power Supply	12V DC car adapter
Recording Resolution	720 x 480 pixels (standard definition)
Frame Rate	30 fps
Lens Aperture	F2.0
Viewing Angle	120° wide angle
Storage	Micro SD card (up to 32 GB, Class 10 recommended)
Loop Recording	Yes, continuous recording with file overwrite
G-Sensor	Built-in, locks video on impact
Motion Detection	Yes, starts recording when motion is detected
Night Vision	Infrared LEDs for low-light recording
Display	2.0 inch TFT LCD screen
Mounting	Suction cup or adhesive mount
Maintenance & Cleaning	Wipe lens with soft, dry cloth; do not use solvents
Safety	Do not place where it obstructs driver's view; keep away from airbags
Spare Parts & Repairability	Spare mounts and power cables available; battery replacement by qualified technician
General Information	User manual available for free download at notice-facile.com

Frequently Asked Questions - CC-6600E CLARION

How do I install the Clarion CC-6600E dashboard camera?

Mount the camera on your windshield using the suction cup or adhesive mount. Adjust the angle so the lens faces the road. Connect the power adapter to your car's 12V socket. Insert a micro SD card (up to 32 GB) into the slot. Press the power button to start recording.

What type of memory card does the CC-6600E support?

It supports micro SD cards up to 32 GB. A Class 10 card is recommended for optimal performance and to avoid recording interruptions.

How do I enable loop recording?

Loop recording is enabled by default. The camera overwrites the oldest video files when the memory card is full. You can adjust the loop recording duration (e.g., 1, 3, or 5 minutes) in the settings menu.

What does the G-sensor do?

The built-in G-sensor detects sudden impacts or collisions. When triggered, it locks the current video file to prevent it from being overwritten during loop recording.

Can I use the camera at night?

Yes, the CC-6600E has infrared LEDs for night vision. However, image quality may be reduced in very low light conditions. Ensure the windshield is clean for best results.

How do I adjust the recording resolution?

Go to the settings menu on the camera's screen. Look for 'Resolution' or 'Video Quality' options. The camera supports multiple resolutions; the highest is 720x480 at 30 fps.

What should I do if the camera freezes or does not respond?

First, try a soft reset by pressing the reset button with a paperclip. If that doesn't work, remove the memory card and power cycle the camera. Reformat the card in FAT32 using a computer.

How do I view recorded videos?

You can view videos directly on the camera's 2.0-inch LCD screen. Alternatively, remove the micro SD card and insert it into a computer or card reader. Videos are stored in MP4 format.

Is the motion detection feature adjustable?

Yes, you can enable or disable motion detection in the settings. When enabled, the camera starts recording automatically when movement is detected in its field of view.

Where can I find the user manual for the CC-6600E?

The user manual is available for free download at notice-facile.com. Simply search for 'Clarion CC-6600E' and download the PDF.

USER MANUAL CC-6600E CLARION

Installation/Owner's Manual

CC-6500E (WITH SHUTTER) CC-6600E

HEAVY DUTY CMOS CAMERA

- Thank your service to your purchase of the Character product. - Found the "Install at a and Instruction Manual" carefully to ensure content and details.

Clarion Co., Ltd.

At Rights Reserved. Copyright © 2016: Clarion Co., Ltd.

SAFETY PRECAUTIONS

The following table is provided in the image.

A WARNING

- Do not use this program in any way either then available installation

- So not use our camera in any way to reach that function. This device is a vehicle mounted near view camera. Doing so may lead to a malfunction, the electric shock or accident.

- Do not attempt to disassemble or modify the unit.

Never chassable, modify or cut the cable covering to draw power from another device. Delep so may find in a malfunction, fire, electric shock or accident.

● Do not dispose the cable

Moisture or water may get made the camera through the damaged part, resulating in

1970.2.18 of the

● Never use the vehicle's safety-related parts* for mounting or grounding the device.

Doing so may result in loss of combat, fire or accident.

● Before making connections, disconnected the negative battery terminal.

Fisher to do any person with a small, noiling or no punctuation (in, electric shock or

35:100

● Roole the cables standing high-temperature sectors.

The opening of the caries may not calling a non-circuit and routing in a transportation fire or accident. Pay particular attention when routing the caries inside the engine command

- installation

● Installation and removal of the device should be requested to a professional service engineer.

Anim as may lead to a multifunction, fine or excellent. Contact the intake where the intake was unrefused.

- After competing installation and wiring work, check and make sure the vehicle's

electrical equipment" is working properly.

* Snakes, lights, horn, hazard lamps, brivers, etc.

Methacitating critical equipment in the vehicle may lead to fire, electric cars or accidents.

- For vehicles which with an exclusively broke light, move the centers in the list of light and mount it in a location where the auxiliary broke light can be soon fully.

If not, the and lary brake light may be obstructed, resulting in an accident.

- When mounting the camera outside a vehicle, mount it within the legally stipulated

range

A developing cancer might be positively and cause an attack.

- If insulation of the device requires making a hole in the choice, check the position of the wire, laser, electrical wire, etc. and be sure to avoid interference or defect.

Domested pipes or other parts may lead to a malfunction, fire or accident.

● Route and bundle the cables so that they do not interfere with driving operation.

If a table has made the sharing results, new bar broke periods etc., if may find from

42.10m

● Never drive looking safely at the monitor.

There is a limit in the range of the monitor image that can be captured as the camera is an auxiliary device used for checking obstructions, etc. Actual distances and perceptions may differ, so he seems visually struck easily while driving. Failure to do it causes the risk of falling a camera or other in the camera's blind seat, causing a surprise on behalf.

● Deconvuls use in the event of malfunction or abnormally.

If no images are displayed, smoke is emitted or there is a strange smell, stop using the device immediately and consult the dealer where it was purchased. Continued use may result in a malfunction, line, electric shock or accident.

- Do not pour water or place foreign objects inside the devices.

It a foreign product or solar poles into the due to, smoke or a charge and is produced, or any other absolutely useful, also using the service manufacturer and control the supply where

- If you turn absolutely bad, stop using the vehicle in turn, and avoid the loads where it was purchased. Continued use may result in a malfunction, fire, electric shock or accident. - Reverse your vehicle at a slow speed.

This camera uses a wide-angle lens. The image captured may differ from the actual distance so reversing the vehicle at a high speed may cause a collision with people or objects, resulting in a serious accident.

A CAUTION

- Follow the instructions in the manual when mounting and connecting the device.

Insorrect correction may result in a malfunction, line or accident.

● After mounting the device, check that the monitor image is a mirror image (game

image as the rear mirror.

Incorrect setup may mean that the monitor image is not horizontally tipped, resulting in

3.2.101

- be sure to use the accessories and specified parts.

Using components other than those specified may need to damage or deacement, of the

Camera testing in 19th beginning of 2008 and leading to a multilayer, the of 3228

CAUTION

● After wiring the various cables, secures them with clamps and/or insulating laps. If the cables remain connected with the screens, they will buy and shoot-closed, load up to a post-tuning tool or acquired

- If a hole is made in the chassis to route the cables, use protective tubing or insulating granometer.

If the table screen is connected with the openings, they will buy and shoot-down, leading to an airplane or fire.

- If a hole is made in the chassis for mounting or cable routing purposes, real the gap in the hole and the gap between the hole and the cable with silicon adhesive or similar.

- If exhaust gas or water pets inside the vehicle through the gap, it may result in an accident - Route the cables so that they do not get caught in the chassis, screws, seat calls or other moving parts

Damaged or short-circular cables may reach in a refundion. In, electric shock or

and demt.

● do not subject the equipment to strong impacts e.g. by dropping or mining it etc. Does so may lead to a malfunction or line.

- If screws are used to mount the device.

Locus species may result in a refundation or mutation.

Do not use the camera underwater.

It used underwater, water may get inside the camera resulting in a malfunction, electric shock or coolers.

● After mounting the camera, do not subject it to strong impacts e.g. by hitting it etc. The mounting angle may change, resulting in a normal image not being collected. In addition, the device uses a microscope electronic park. Subjecting it is black may result in modulation, (see on electric block).

● Do not spray high-pressure water onto the camera when washing the vehicle with a high-pressure washing machine.

Detachment of the camera or loosening of the screws may result in damages or malfunctions. Moreover, it water gets inside the camera, it may result in a malfunction, line or electric shock.

- Check the mounting screws occasionally and tighten any that have come loose.

This camera may get deacral and drop off due to locometry of the spectra, making it contact with sediments and accidents.

The monitor image of this camera is inverted left to right just like the rear view mirror

of your vehicle. In addition, note that the field of vision may also differ depending on the vehicle.

PRECAUTION

This equipment has been turned to comply with the limits for a Phase 5 clinical trial.

1.2014年1月1日（星期二）

These limits are designed to provide remarkable selection against natural interference in a reasonable

The equipment generated loss, and can reduce cold frequency energy and heat, rated and used

In accordance with the instructions, may cause harmful interference to reduce common rain effects. However, there is no guarantee that interference will not occur in a particular installation.

This equipment does cause formal interference to reduce or isolation recognition, which can be

30-min daily tilt. The equipment of 5-6 on the 1st to 5th grade to central the order of an experience/tradar TV device for help:

■ INFORMATION FOR USERS:

CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL

TO THE WARRANTY AND WILL VOLTAGE APPROVAL.

PACKAGE CONTENTS

The following parts of the known components

the end of any related, related. He is able to see the one produce:

① Installation Owners manual

(THIS BOOKED....) ① Van company

Mounting Inset

④ Catenius 2014

① Bonne ....

Accessory bag 1

④ Hexagon head toils with bulk-in

(No text)

the leading to the most until . . . . . . . . . . . . . . . . . . . . . . . . . . . .

③. Huguen trad helps with built-in washer

Nb mm x 20 mm flar installing on the vehicle water ....

① Flanged nuts (1/6 mm) for installing on the vehicle side;

SPECIFICATIONS

		CORNIFwith attached chatter1	CORNIF
Power supply voltage2	Camera power supply 30Ω/2"Shutter drive power supply	× 12^ ÷
Current consumption	Camera power supply 75 kV or lessShutter drive power supply	500 mA/2 ohms—
Image sensor 140° inch 0.25m x 200x 200A Angle of motion Hydroxide 180° (Watts 67°)
Weight 185° (including weight 140° (including weight)
Wall shear external dimensions		77.0x ± 35.9h × 22.8 mm	77.0x ± 38.9h × 24.6 mm

* Use on a power supply line by the special camera. LLC box or monitor. Never connected, to solid and pure james inside a power supply line with no pin. The other lighting set

CODEDE (with attached shutter)

Shelter Safford, 2004

(1) (2) (3) (4) (5)
......
图1
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated text (underscores) where none should exist, violating the rule to ignore such lines. Hence, the OCR result is inconsistent with the Ground Truth.
ENCE CD600E
med shutter;
(二) 2017年1月1日至2018年1月1日（含）的公司股票交易均价为4.56元/股，与前一交易日收盘价相比，涨幅为-0.97%。
124-
1
1
4.0128—
(No text)
(No text)
(No text)
21.46
x 55.00 Yuan
2017年3月31日
of Hors. NAR correct to the supply
CDGEDOE
77 mm 514 mm
→
图 1
11011510
图 1
11

1. 2017年1月1日

Declaration on the party E'ou Chuan esheve that its product (C1604N, C1604K) is leading for province of L'impire

201430, 9:25 October 2014

2.1.3.2017年1月1日

_1(max) (Figure 5)

Figure 10.5

244 134 000 576, 540 000 389, France

10.49% 120.53% 44.65% 120.53% 44.65%

[Non-Text]

the revenue of the company

1. pio=32/5 of Eletzino

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

HOW TO INSTALL

Installation Precautions

• The size to use the supplied tools to cover the tools in the camera. If non-bols are but often mounting the camera size and uses 125 mm to 10 mm be taken used body with bolt or washer. Do not order any circumstances use no longer than 1 bit. To ensure water/sewer, the bolt stops in the camera case has a good structure. Use of long bolts more frequently the screw thruster and camera main body, according to vertical dimensions.

Figure 10. The following table provides the relative results in multiplicity.

● Build mounting the camera where the surface glass area is

cash in claims by made securities, other than one, etc.

10 mm

(4) Recupulous habits of

Hill-1940

64 mm × 5 mm

(2) 100%

1 Drill camera mounting holes (Ø 5.5 mm) at 2 locations, and cable routing holes (Ø14 mm if the enclosed grommel is used) on the chassis end. To prevent one or two, make a hole in a strong part and record the camera. If the car is not shaded, the car is completely open and closed.

2 Fix the mounting bracket securely to the chassis using the enclosed bolts and flange nuts. (2 locations)

3 Secure the camera main body temporarily to the mounting bracket using the enclosed bolts and bushes. 12 locations on the left and right

The source is taken, the morning breakfast at night or night.

4 See "WIRING AND CONNECTIONS" for the wiring instructions.

5 After connecting the cables, mount the camera and adjust the angle so that the rear bumper or back end of the vehicle appears in the monitor. (See diagram on the right)

6 After adjusting the mounting angle of the camera, fully tighten the bolts to secure the camera main body properly.

7 Be sure to use a series material in a solution

- Be sure to use a setting material (102) in cable, etc.) on the mounting holes, screws and cable

routing holes on the chassis for water-proofing and rust-proofing.

■Mounting example

Installation example on a vertical surface (rounding angle 44°)

Installation example-on a vertical surface (mounding angle: 44°)

man end of the vehicle

(五)

proofing.

Installation example on a horizontal surface (mounting single -46")

WIRING AND CONNECTIONS

Wiring Precautions

■ connected to a target

In cases, failure to do so may cause a short cycle, resurgent

mation the stock shock of

- By the key case, made the value 25 to 30 in percent. This

If you're shopping and selling enough by the second line, in connection, he is ensuring for the

2.1.2005 are 349612 propen, incl the genera in 2 occasion after 9427 W 1-12 class 1

- Sits on writing the text, as far as possible to read from some items in the areas such as the other.

sensal pice, sure mskn ex, rotar raps such as the ccing fan abmola; el., and noa

- Use a project to use the enhanced project.

project the metallic parts of the moving holes, LLC

Section of the fiscal plans and plans of the cablec inc.

14.02.06.38(2)

- For the same time, we have been done.

for the 100% of the stock price directly be corrected to a power supply, and such as the

■ Connection procedure for special waterproof relay cable (sold separately)

1 Align the arrow mark on the relay cable to the △ mark on the camera cable

to insert the connector.

2 Pull the cable lightly to make sure that the connector is locked properly.

Do not pull a bond the connected card with a frame of 32.14 o'clock

The connection may be damaged if an excessive level is applied.

CLEANING THE CAMERA

● Dr. 105, 2014, 1987, 1993

● Currar tape: In censers, a trachea; that werts is peeling prionter s.r. The way, soal in oasles

on the camera. The surface size is 200 mm, and the width is 170 mm and width is 45 mm.

you rub the camera strongly with a dry circle

- The number of cases is divided, you can serve by opening and closing the whole with your fever. When you can use a dose the whole level. The whole may not complete or continue in the case, we can use a dose to start the second place.

TROUBLESHOOTING

the following situations may not be malnolters. Check the following one more time before sending it: a case for report. Contact the venue where the product was produced if you have any questions or a

Symptoms	Prevalence measure	Anxiety
There is no image	Incomplete adding	Close the contented one and connect the same one.
Image quality in text	Surface, places areas in animals	While it is fully able to use and check bits, they have a smooth, may never be used to create a strongly, but in any way.
	The area is supposed to complement the healthful room and another inside.	The corners will claim to normal if the light is being on the one disappears.
	Functioning in animals	Images opened by something else (e.g., in the eye). The images are not known as the corners, which are important.
Studied hands and stones	The scene is recommended by the first time and second time.	Because the body is done, but the first time is being up (e.g., the first time is not required) or increasing time.
	Follow, how one is much to the corner.	Made the answer, but one, first before two times.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]