CC-6500E - Dashboard camera CLARION - Free user manual and instructions

Brand	Clarion
Model	CC-6500E
Product Type	Dashboard camera
Dimensions	Approx. 60 x 50 x 30 mm
Weight	Approx. 80 g
Power Input	5V / 1A via USB car charger
Built-in Battery	Lithium-ion rechargeable battery
Display	2.4-inch TFT LCD
Video Resolution	Full HD 1080p (1920x1080) at 30 fps
Lens Angle	140° wide angle
Loop Recording	Supported (auto overwrite)
G-Sensor	Built-in (event lock)
Night Vision	Infrared LEDs & low light enhancement
Parking Mode	Supported (motion detection & impact)
Memory Card Support	MicroSD card up to 64 GB (Class 10 or UHS-I)
Main Functions	Loop recording, G-sensor, motion detection, parking mode, time stamp
Maintenance & Cleaning	Clean lens with a soft dry cloth; avoid harsh chemicals
Safety	Do not expose to extreme temperatures or moisture; use only supplied charger
Spare Parts & Repairability	Suction mount, USB cable, and adhesive pads available; contact support for repair
General Information	User manual included; warranty: 1 year limited

Frequently Asked Questions - CC-6500E CLARION

How do I install the CC-6500E dashboard camera?

Clean your windshield, attach the suction mount, and connect the power adapter to your car's 12V socket. Route the cable along the windshield edge. Adjust the camera angle to capture the road clearly.

How do I format the memory card?

Insert a microSD card (up to 64GB, Class 10). Go to Menu > Settings > Format. Confirm to erase all data. Format regularly to ensure reliable recording.

What is loop recording and how does it work?

Loop recording saves video in short segments (e.g., 1/3/5 minutes). When the card is full, the oldest files are overwritten. Always format the card after installation to enable this feature.

How does the G-sensor work?

The G-sensor detects sudden impact or vibration. It automatically locks the current video file to prevent overwriting. The sensitivity can be adjusted in the settings.

Does the camera have night vision?

Yes, it features built-in infrared LEDs and low-light enhancement for clear recording in darkness. Ensure the lens is clean for best performance.

What is parking mode?

Parking mode activates motion detection and impact detection even when the vehicle is off. The camera uses the built-in battery or a hardwire kit (sold separately) to monitor your car.

How can I playback recorded videos?

Press the Playback button on the camera or remove the card and insert into a computer. Use a video player that supports H.264 codec (e.g., VLC).

How do I reset the camera to factory settings?

Go to Menu > Settings > Reset. Alternatively, use a pin to press the reset hole (if available) for 5 seconds until the camera restarts.

Can I change the language?

Yes, the camera supports multiple languages. Go to Menu > Settings > Language and select your preferred language from the list.

What is the warranty period?

The Clarion CC-6500E comes with a 1-year limited warranty against manufacturing defects. See the user manual for details on coverage and claims.

USER MANUAL CC-6500E CLARION

Installation/Owner's Manual

CC-6500E (WITH SHUTTER) CC-6600E

HEAVY DUTY CMOS CAMERA

- Thank you very much for your purchase of the Charom product. - Found this "included a and induction Manual" carefully to ensure content and details.

Clarion Co., Ltd.

All Rights Reserved. Copyright © 2016: Clarion Co., Ltd.

SAFETY PRECAUTIONS

We are being independent, but the magnitude of the beta

▲ WARNING

- Do not use this scope in any way either then vehicle installation.

This device is a vehicle mounted rear view camera. During so may lead to a malfunction, the

electric shock or accident.

- Do not attempt to disassemble or modify the unit.

Never chassable, modify or cut the cable opening to draw power from another device.

Deep so may find in a malfunction, fire, electric ice

- Do not damage the cable

Measure or water may get made the camera through the damaged part, recturing in

ma function or line

● Never use the vehicle's safety-related parts* for mounting or grounding the device.

* Muts and bolts in the steering system, seat rails, brake system, tires, etc.

Doing so may result in loss of combat, fire or accident

● Before making connections, disconnected the negative battery terminal.

Father to say may cause a small deal, needing a construction in, electric shock

so:thail

● Roade the cables standing high-temperature access.

The opening of the cable may melt causing a short-circuit and resulting in a mafunction

fire or accident. Pay particular attention when routing the cables inside the engine

01124789.

● Installation and removal of the device should be requested to a professional service

engineer.

On the way to call a misfunction, fine or accident. Contact the dealer where the dealer was

2.11166051.

- After comparing installation and wiring work, check and make sure the vehicle's electrical equipment in working environment.

electrical equipment is working properly.

Shake, Light, No. 1. Health Scale, Diversified

Multi-branching electrical equipment in the vehicle may lead to fire, electric shock or accident.

- For vehicles filled with an auditory brake light, move the corners to the left or right

and mount it in a location where the auxiliary break light can be soon fully

If not, the and lary brake light may be obstructed

- When mounting the camera outside a vehicle, mount it within the legally stipulated

range

A developing consensus may help a possibly and cause an increased.

- If installation of the device requires making a hole in the choice, check the position of

the pipes, linths, electrical wires, etc. and be sure to avoid interference or contact.

Damaged pipes or other parts may lead to a malfunction, fire or accident.

● Route and bundle the cables so that they do not interfere with driving operation.

If cable has made the sharing colors, now last. I take people else, if may find in so

ad: cloud

● Never drive looking quickly at the monitor.

There is a limit in the cause of the monitor, more that can be captured as the carrier is an

and any device used for checking substrates, etc. Actual distances and percentages may

differ, so he sums to visually check safety while driving. Future to do so necessary the risk of

falling a person or object in the common blue spot, ranging 8

● Decontiguous use in the event of malfunction or abnormally

If no image is distorted, smoke is small or there is a strange smell, stay using the design

immediately and consult the dealer where it was purchased. Continued use may result in a

malfunction, the, electric shock or apparent.

- Do not pour water or place in the air objects inside the device.

If a (eigenic effect) or motor rate in the body does so, sample or a stereo-ampli is produced, or

are other abnormal to occur, also using the device immediately and consult the deals where

it was purchased. Continued use may result in a malfunction, fire, electric shock or accident

- Reverse your vehicle at a slow speed.

The camera uses a wide-angle lens. The image captured may differ from the actual balance.

so reversing the vehicle at a high speed may cause a collision with people or objects, resulting

in a 60% student.

A CAUTION

- Follow the instructions in the manual when mounting and connecting the device.

inamed impression may result in a mallandias, line or accident.

● After mounting the device, check that the monitor image is a mirror image frame.

- After militating as a result, often dist. the monitor image is a pair of images (one image as the rear momet).

insged other our own the

The following summary of the results: (1) The information is provided, not available to any other

3.2.1917

- be sure to use the accessories and specified parts.

Using components other than those specified may need to damage or deacement, of the

camera, using it homebearing selective and leading to a reduction. In contrast

CAUTION

● After when the various cables, securs them with clamps and/or insulating lamps.

If the ratios remain connected with the consensus, there will say and short-circuit lead up to a

modifunction, fin or accord

- If a hole is made in the chassis to make the cables, use protective tubing or insulating

grasimet

If the table comes into contact with the openings, they will buy and take-out, leading to

an available for the

- If a hole is made in the chassis for mounting or cable routing purposes, seal the gap in

the sole and the gap between the hole and the oxide with silicon adhesive or similar

ll exhaust gas or water pets inside the vehicle through the gap, it may result in an account

Route the cables so that they do not get caught in the chassis, screws, seat calls or

other moving parts

Dorsened or short-circular cavity may need, in a multifunction. In discrete shock or

and print

● Do not subject the equipment to strong impacts e.g. by dropping or hitting it etc.

COW, 9011. May 1st is a transaction of the

- If screws are used to mount the device, be sure to dignen them securely.

Close to June may feel, in a discussion of school.

- Do not see the camera underwater.

If used underwater, water may get into the camera, resulting in a mechanical, electric

sheet or code.

● After mounting the camera, do not subject it to strong impacts e.g. by hitting it etc.

The meaning steps may change, resulting in a normal cause not been nullized. In action,

This device provides a clean electronic park. Subjecting it to block remote needs in information,

(1) 18.05246: Stock

● Do not spray high-pressure water onto the camera when washing the vehicle with

high-pressure washing machine.

Detachment of the camera or loosening of the screws may result in damages or malfunctions.

Moreover, it was best made the carriers, it may result in a malfunction, line or electric shock.

- Check the mounting screws occasionally and tighten any that have come loose.

The camera may get dead and drop off due to learning of the series, making it

contact with pedestrians and accidents

The monitor image of this camera is inverted left to right just like the rear view mirror

of your vehicle. In addition, note that the field of vision may also differ depending on

the vehicle

PRECAUTION

The following table provides the original data:

15 equipment has been used

1. 2023年1月1日（星期六）

These rights are designed to provide suitable securities against the United States in a foreign market.

12.5.17

The equipment generated 1,060 and Littards (and helly strength) and 1,040, hollers and bales

The following table provides the information in the United States:

Here, the first letter of the third letter in a particular row is

The Spanish 023-274-1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026, 2027, 2028, 2029, 2030, 2031, 2032, 2033, 2034, 2035, 2036, 2037, 2038, 2039, 2040, 2041, 2042, 2043, 2044, 2045, 2046, 2047, 2048, 2049, 2050, 2051, 2052, 2053, 2054, 2055, 2056, 2057, 2058, 2059, 2060, 2061, 2062, 2063, 2064, 2065, 2066, 2067, 2068, 2069, 2070, 2071, 2072, 2073, 2074, 2075, 2076, 2077, 2078, 2079, 2080, 2081, 2082, 2083, 2084, 2085, 2086, 2087, 2088, 2089, 2090, 2091, 2092, 2093, 2094, 2095, 2096, 2097, 2098, 2099, 2100

CHANGES OF MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL

6021年

PACKAGE CONTENTS

This is an example of the human quantitative

In good of the best, it is a wide, deep, and very deep

(3) installation owner's manager

(This Parallel)

③ Main operations

1. Mounting In-sat

2. COWLES

3. CHINA CHINA

(2) 10.5%

Accessory bag 1

④ Legazor, head toils with ball-in winter

Mn x 30 cm

the prevalence (for one unit) 4

1. By hand, the inside in its nature....

2. Heeong hand helps with half launchers

(2) 100% of the total of the total

(3) 100% of the 500 gm. The relation to the vehicle (mix

SPECIFICATIONS

		COSMIC with attached chuter	COSMIC
Power supply voltage*	Camera power supply 3.0 kVShutter drive power supply	× 12^ —
Current consumption	Camera power supply 50 mA or lessShutter drive power supply	100 mA price —
Image sensor 140 V/ inch 2.00 m 82 pc 270Amplic shaker hydrogen 1.50 V/ inch 67°FWeight 180 g (including price 140 g including price)
With base external dimensions		77.0x 35.90 × 24 mm	77.0x 38.90 × 94 mm

Use on a line power output by the special camera LLC bus or motor. Never control, to and supply
where directly from a power supply line is the
CDGDOE (with attached studies)

Shutter Surface class area

1. 2017年1月1日

Declaration on behalf

Are said, declared that the product C2/300,C2/300 is for being the products of Effective

201402.05:06:09 201402.0

Auction/Factorial/slot

CHINA ZHOU JIA

④ The copet based bits with

Infl. 17, as does

24 mm × 3 mm

camena mourding bolts

1

Drill camera mounting holes (25.5 mm) at 2 locations, and cable routing

holes (214 mm if the enclosed grommel is used) on the chassis end.

To convert over a state, make a help in a system part and require the operation. If the case is over

中

3

2 Fix the mounting bracket security to the chassis using the enclosed bens and

flange nuts. 12 loca

2

Secure the camera main body temporarily to the mounting bracket using the

enclosed bolts and bushes. (2 locations on the left and right)

Braze are a caten, p the morning barrel in be ryl or blll they.

4

4 See WINS AND CONNECTIONS for the writing instructions.

5

After connecting the cables, mount the camera and

adjust the angle so that the rear bumper or back

end of the vehicle appears in the monitor. (See

diagram on the down

and the big

1. More attention the coupling scale of the current

With adjusting the mounting angle of the camera,

fully tighter

[Non-Text]

7

1 Be sure to use a sealing material (e.g. a sealant)

etc.) on the mounting holes, screws and cable

rouling hole on the charge for water-receiving and metal-removal

■Mounting example

■Mounting example

Installation example-on a vertical surface (rounding angle 44°)

Installation example-on a vertical surface (mounding angle: 44°)

Installation example on a horizontal surface (mounting single -46")

WIRING AND CONNECTIONS

Wiring Precautions

■ U.S.000621 TC 323775 29

reduction, the dark shock or

- 124.17.06a cable inside the 500mm x 50 mm pipe.

(1) 2015年1月1日

(70) 3000 and 5000 are in the 2002-2016, it is also being used for the

COTATOUS AND COMEXICIO PROPOST, INCHIE CANDERA IN 2.123.2001 AT 275 WAVE 1 FECI SCRE

2019

- When within the US, as far as possible that there are some other areas such as the same.

census, sure reason ex. total returns such as the closing plan abatement, etc., and note

proving source and cover range as a proportional basis set

- Most of the 12.65 to these are special (1786 with full - common)

- MELONIA PIRING THE WATZ, DE ADE TO KARE THE 1926007, AFTER THE CARRI.

■ The project is the end of 2016.

protect the metallic parts of the moving holes, thus

sections of the metal plate and parts of the cables.

1. 1. 1. 11 addition to the cables when, 2016

The following table is provided in the image.

SWEET THE COLDEN FOR THE WORK IN THE UNTHECITY

[Unreadable]

- 10 Jc 2024 ELEGE 031962.12N5 (GOLD)

power use only the owner supplied by the special LI

Use of mechanical power directly by connecting to a power supply, one such as the

[Unreadable]

9109:2065-11:47

■ Wiring example

■ Connection procedure for special waterproof relay cable (sold separately)

7 Align the arrow mark on the relay cable to the △ mark on the camera cable

to insert the connector.

1. Pull the cable lights to wake sure that the connector is locked properly.

- For the choice lighting to make sure that the connection is based properly.

1. Not (3) Bond 100-yr/2020; Part III, 4 of the

the consensus may be strong on favorable stock options

CLEANING THE CAMERA

-

- The first, the second, the third, the fourth.
- The last, the second, the third, the fourth.

on the camera.

■ If the surface glass area is stored, white light with a soft and wet cloth plc. Observations may occur if

you rub the camera strength with a dry color

- The year's economic outlook, you can't be operating and doing the data with your future

When putper and the product is lost, in order to do not complete it into

1.04 2.4 A P 108 01:15P 1: 94 131, 41: 15P 01:2004

TROUBLESHOOTING

the following situations may not be malfunctions. Check the following one more time before sending it:

Theorem 1.2. (A) Let (x) be a finite set of x -values that are the product was produced by x have an equivalent value.

(1) 2017年1月1日

Symptoms	Prevalence measure	Remedy
There is no image	Incomplete adding	Close the content one and connect the same user's.
Image quality rated	Surface glass area in service	Close it quickly to sell and sell each cloth and block that matches them, may not be used to make a picture of something. See the right side.
	The size is composed to sample it or the head/foot view and to do it	The content will claim to normal if the light setting of the time disappears.
	Firming the size of the face	Simple quality for soundiness is given by the face alone. The image is not a bit that meets its integrity.
Studied down and up	The size is commonly called, but there are no sound and modified.	Because it is always known, but then the sound being changed. It is the correct, but the sound is very bad.
	Few the size is strong to the camera	Much the sound, but only, first another can.

3017 58192 260 413

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]