XRotor X6 Plus - Drone Hobbywing - Free user manual and instructions
Find the device manual for free XRotor X6 Plus Hobbywing in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic Speed Controller (ESC) for multirotor drones |
| Model | XRotor X6 Plus |
| Brand | Hobbywing |
| Dimensions | 70 x 33 x 11 mm |
| Weight | 35 g (including wires) |
| Input Voltage | 2-6S LiPo (7.4-25.2V) |
| Continuous Current | 60A |
| Burst Current | 80A (for 10 seconds) |
| BEC Output | 5V/3A or 7.4V/3A (selectable) |
| Supported Motor Types | Brushless motors (sensorless) |
| PWM Frequency | Up to 500Hz (configurable) |
| Firmware | Supports BLHeli_32 or Hobbywing firmware (updateable) |
| Main Functions | Throttle calibration, timing adjustment, start-up power, brake mode, and multiple protection features |
| Protection Features | Over-current, over-temperature, and low-voltage cut-off |
| Maintenance | Keep clean and dry; avoid moisture and dust; check solder joints periodically |
| Cleaning | Use compressed air to remove debris; do not use liquids |
| Safety Warnings | Disconnect battery before maintenance; avoid short circuits; ensure proper ventilation during operation |
| Spare Parts | Available from Hobbywing authorized dealers (e.g., heat shrink tubing, wires) |
| Repairability | Limited; damaged units typically require replacement; firmware updates via USB adapter |
| General Information | Designed for high-performance multirotors; compatible with most flight controllers |
Frequently Asked Questions - XRotor X6 Plus Hobbywing
What is the input voltage range for the XRotor X6 Plus?
The XRotor X6 Plus supports 2-6S LiPo batteries, corresponding to an input voltage of 7.4V to 25.2V.
How do I calibrate the ESC throttle?
To calibrate, power on the ESC with the throttle at maximum, wait for beeps, then lower throttle to minimum. The ESC will confirm calibration with a series of beeps.
Can I use this ESC with a 4S battery?
Yes, the XRotor X6 Plus is compatible with 4S LiPo batteries (14.8V). Ensure the BEC output is set correctly for your receiver voltage.
What is the maximum continuous current rating?
The continuous current rating is 60A, with a burst current of 80A for up to 10 seconds.
Does this ESC support programming via PC?
Yes, it supports firmware updates and parameter adjustments using the Hobbywing USB Link adapter and the Hobbywing ESC configuration software.
What is the BEC output voltage?
The BEC output is selectable between 5V/3A and 7.4V/3A, controlled by a jumper or firmware settings.
How do I set the brake mode?
Brake mode can be set via programming: choose from no brake, soft brake, or hard brake depending on your multirotor configuration.
What protection features does the XRotor X6 Plus have?
It includes over-current protection, over-temperature protection, and low-voltage cut-off to prevent damage to the ESC and battery.
Is this ESC compatible with BLHeli_32?
The XRotor X6 Plus typically runs Hobbywing firmware, but some versions may support BLHeli_32. Check the product label or Hobbywing website for confirmation.
Where can I find the user manual or spare parts?
The user manual is available for free download on notice-facile.com and the Hobbywing website. Spare parts can be ordered from authorized Hobbywing dealers.
User questions about XRotor X6 Plus Hobbywing
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drone in PDF format for free! Find your manual XRotor X6 Plus - Hobbywing and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XRotor X6 Plus by Hobbywing.