DZS60 - Beer dispenser Perlick - Free user manual and instructions
Find the device manual for free DZS60 Perlick in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Dispenser |
| Brand | Perlick |
| Model | DZS60 |
| Dimensions (H x W x D) | Approximately 40 x 20 x 20 inches |
| Weight | Approximately 100 lbs |
| Power Supply | 120V AC, 60Hz |
| Cooling System | Forced air circulation with thermostat control |
| Temperature Range | 34-40°F (1-4°C) |
| Keg Capacity | Up to 1/2 barrel or multiple smaller kegs |
| Dispensing Speed | Adjustable flow control |
| Cleaning | Daily exterior wipe down; periodic line cleaning with appropriate solution |
| Safety Features | Grounded power cord; safety relief valve; anti-tip bracket recommended |
| Spare Parts | Faucets, couplers, drip tray, cooling fan available |
| Warranty | Limited 1-year parts and labor |
| Certifications | UL, NSF certified |
| Manual Pages | 55 |
| Language | English |
Frequently Asked Questions - DZS60 Perlick
How do I clean the beer lines?
To clean the beer lines, disconnect the keg and flush the lines with a cleaning solution (like PBW) followed by a rinse with water. Use a cleaning pump or gravity flow. Repeat monthly or when changing kegs.
What temperature should the dispenser be set to?
Set the thermostat to maintain a temperature between 34°F and 40°F (1-4°C) for optimal beer dispensing and foam control.
Can I use a 1/6 barrel keg?
Yes, the DZS60 accommodates various keg sizes, including 1/6 barrel, 1/4 barrel, and 1/2 barrel. Adjust the coupler and tower height if needed.
Why is my beer foamy?
Foamy beer can result from high temperature, improper CO2 pressure, or dirty lines. Ensure the dispenser is at 38°F, CO2 at 12-14 PSI, and lines are clean.
How do I install the dispenser?
Place the dispenser on a level surface near a power outlet. Allow 2 inches of clearance around the unit for ventilation. Connect the keg and CO2 tank following the manual's diagram.
What type of CO2 regulator is needed?
Use a standard beer CO2 regulator with a pressure range of 0-60 PSI. Secondary regulators are recommended for multiple kegs.
How often should I replace the faucet?
Faucets should be replaced every 1-2 years or if they show signs of wear or leakage. Use only Perlick-approved faucets for compatibility.
What does the error code E1 mean?
Error code E1 indicates a temperature sensor failure. Contact customer support or replace the sensor according to the service manual.
Can I dispense beverages other than beer?
Yes, the dispenser can be used for cider, kombucha, or carbonated water with appropriate couplers and cleaning after each use.
Where can I find replacement parts?
Replacement parts are available from Perlick authorized dealers or online. Common parts include faucets, drip trays, and cooling fans.
User questions about DZS60 Perlick
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual DZS60 - Perlick and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DZS60 by Perlick.