HP24TS-3-2L2A - Beer dispenser Perlick - Free user manual and instructions
Find the device manual for free HP24TS-3-2L2A Perlick in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Perlick |
| Model | HP24TS-3-2L2A |
| Type | Beer Dispenser (Undercounter Kegerator) |
| Dimensions (W x D x H) | 24 x 24 x 34 inches |
| Weight | 100 lbs |
| Power Supply | 115V / 60Hz / 1.5A |
| Number of Taps | 3 |
| Keg Capacity | 2 half-barrel or 3 sixtel kegs |
| Temperature Range | 33°F to 40°F |
| Refrigerant Type | R134a |
| Features | Digital temperature control, forced air cooling, stainless steel draft tower |
| Installation | Designed for undercounter installation with proper ventilation |
| Cleaning | Periodic cleaning of beer lines and faucets recommended |
| Safety | GS and UL listed; use grounded outlet |
| Spare Parts | Order from Perlick or authorized dealers |
| Manual | Free PDF download available at notice-facile.com |
Frequently Asked Questions - HP24TS-3-2L2A Perlick
How do I install the Perlick HP24TS-3-2L2A beer dispenser?
Ensure the unit is placed in a well-ventilated undercounter space. Level the dispenser, connect to a grounded 115V outlet, and allow 24 hours before loading kegs. See installation manual for detailed steps.
What is the ideal temperature for serving beer?
Set the digital thermostat between 33°F and 40°F. For most beers, 38°F is optimal to balance carbonation and flavor.
How do I clean the beer lines?
Disconnect keg, flush lines with a cleaning solution (e.g., BLC or PBW) using a pump kit, then rinse with water. Repeat monthly or when changing kegs.
Why is my beer foamy?
Check temperature (too warm), CO2 pressure (should be 12-14 psi for most beers), and ensure lines are clean. Also verify the keg is not over-pressurized.
How many kegs can I fit?
The HP24TS-3-2L2A holds two half-barrel (15.5 gallon) kegs or up to three sixtel (5 gallon) kegs, depending on configuration.
Can I install this dispenser outdoors?
No, this unit is designed for indoor use only. Exposure to weather can damage electrical components and void warranty.
What type of CO2 regulator is needed?
A standard CO2 regulator with a primary gauge (0-60 psi) and secondary gauge for each line is recommended. Perlick offers compatible regulators.
How often should the condenser coil be cleaned?
Every 3 months, use a soft brush or vacuum to remove dust from the coil to maintain efficient cooling.
What is the warranty period?
Perlick offers a 2-year parts and labor warranty for residential use. Commercial use may have a shorter warranty. See documentation for details.
Where can I find replacement parts?
Parts like faucets, towers, and regulators are available from Perlick directly or authorized dealers. Check the manual for part numbers.
User questions about HP24TS-3-2L2A Perlick
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual HP24TS-3-2L2A - Perlick and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HP24TS-3-2L2A by Perlick.
USER MANUAL HP24TS-3-2L2A Perlick
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Perlick
Model : HP24TS-3-2L2A
Category : Beer dispenser