HC24TB-3-1L1 - Beer dispenser Perlick - Free user manual and instructions
Find the device manual for free HC24TB-3-1L1 Perlick in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Undercounter Beer Dispenser |
| Brand | Perlick |
| Model | HC24TB-3-1L1 |
| Dimensions (H x W x D) | 28" x 20" x 18" |
| Weight | 85 lbs |
| Power Supply | 115V / 60Hz, 5 Amps |
| Cooling System | Compressor, 1/5 HP |
| Temperature Range | 34°F - 40°F |
| Number of Taps | 3 |
| Construction | Stainless Steel |
| Insulation | High-density Foam |
| Keg Capacity | 1 x 1/2 barrel or 2 x sixtels |
| Refrigerant | R-290 |
| Mobility | Casters Included |
| Safety Features | Self-closing Door, Leveling Legs |
| Maintenance | Periodic Cleaning of Beer Lines, Replace CO2 Tank |
| Spare Parts Available | Faucets, Towers, Regulators, Drip Trays |
| Warranty | 1 Year Parts and Labor |
| User Manual | Online PDF Available |
Frequently Asked Questions - HC24TB-3-1L1 Perlick
How do I clean the beer lines?
Clean the beer lines using a line cleaning kit with a cleaning solution. Flush with water after cleaning and sanitize before use. Repeat every 2 weeks.
What is the ideal temperature for serving beer?
The ideal serving temperature is between 34°F and 40°F. Adjust the thermostat accordingly for optimal carbonation and flavor.
How do I install the CO2 tank?
Attach the CO2 regulator to the tank, then connect the gas line to the keg coupler. Open the tank valve slowly and set the pressure to 10-12 psi for most beers.
What type of kegs does it accept?
It accepts standard ¼ barrel, ½ barrel, and sixtel kegs with a D-style coupler. Ensure the keg fits in the adjustable shelves.
How do I replace a keg?
Remove the coupler from the empty keg, lift it out, and place a new keg. Attach the coupler, open the gas, and purge the air by pulling the vent. Serve beer after it chills.
Why is my beer foamy?
Foaming can be caused by excessive pressure, warm beer, or dirty lines. Check CO2 pressure (lower if needed), ensure beer is cold, and clean the lines.
How do I adjust the thermostat?
Locate the thermostat dial inside the unit. Turn it clockwise for colder temperatures. Wait 24 hours for stabilization. Optimal setting is mid-range for 38°F.
Is the unit noisy?
Normal operation includes a low hum from the compressor and fan. If noise is excessive, check for leveling or loose parts. Ensure proper ventilation.
What are the electrical requirements?
Requires a 115V / 60Hz dedicated outlet with a minimum 15 amp circuit. Use a GFCI outlet for safety. Do not use an extension cord.
How do I get spare parts?
Contact Perlick customer service or authorized dealers. Common parts like faucets, towers, and regulators are available. Have your model number ready.
User questions about HC24TB-3-1L1 Perlick
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual HC24TB-3-1L1 - Perlick and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HC24TB-3-1L1 by Perlick.
USER MANUAL HC24TB-3-1L1 Perlick
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Perlick
Model : HC24TB-3-1L1
Category : Beer dispenser