HP24TO-3-1R2 - Beer dispenser Perlick - Free user manual and instructions
Find the device manual for free HP24TO-3-1R2 Perlick in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Dispenser |
| Brand | Perlick |
| Model | HP24TO-3-1R2 |
| Width | 24 inches |
| Depth | 28 inches |
| Height | 36 inches |
| Weight | 110 lbs |
| Power Supply | 115V / 60Hz |
| Cooling System | Forced air refrigeration |
| Temperature Range | 34°F to 38°F |
| Number of Taps | 3 |
| Tower Type | Through-counter, single body |
| Drip Tray | Stainless steel, removable |
| Keg Coupler Compatibility | D-type and S-type |
| Thermometer | Analog dial |
| Installation | Under-counter or freestanding |
| Cleaning | Line cleaning kit recommended monthly |
| Safety | Grounded plug required; keep ventilation clear |
| Spare Parts Availability | Yes, through authorized dealers |
Frequently Asked Questions - HP24TO-3-1R2 Perlick
What is the recommended temperature for the Perlick HP24TO-3-1R2?
The optimal temperature for serving draft beer is between 34°F and 38°F. Adjust using the thermostat dial inside the unit.
How do I clean the beer lines on this dispenser?
Use a line cleaning kit with warm water and a mild cleaning solution. Circulate for 10 minutes, then flush with clean water. Repeat monthly.
What type of keg coupler is needed?
The HP24TO-3-1R2 is compatible with D-type (American) and S-type (European) keg couplers. Ensure you have the correct coupler for your keg.
Can I install this dispenser outdoors?
No, this unit is designed for indoor use only. Exposure to moisture or extreme temperatures may damage the electronics.
What are the dimensions of the Perlick HP24TO-3-1R2?
The unit measures approximately 24 inches wide, 28 inches deep, and 36 inches high. Ensure your counter space accommodates these dimensions.
How do I adjust the CO2 pressure?
Connect your CO2 tank to the regulator and adjust the pressure to 10-14 PSI depending on the beer style. Check the manufacturer's guidelines.
Why is my beer foamy?
Foamy beer can be caused by high temperature, excessive CO2 pressure, or dirty lines. Check temperature, reduce pressure to 10 PSI, and clean lines.
How often should I replace the air filter?
The air filter should be checked every 3 months and replaced if dirty. A clogged filter reduces cooling efficiency.
Is the drip tray dishwasher safe?
The stainless steel drip tray is dishwasher safe on the top rack. Avoid using abrasive cleaners.
Where can I buy spare parts or accessories?
Spare parts are available through Perlick authorized dealers or online retailers. Common replacements include faucets, couplers, and cooling fans.
User questions about HP24TO-3-1R2 Perlick
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual HP24TO-3-1R2 - Perlick and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HP24TO-3-1R2 by Perlick.
USER MANUAL HP24TO-3-1R2 Perlick
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Perlick
Model : HP24TO-3-1R2
Category : Beer dispenser