BH0210003-1 - Heating Bromic - Free user manual and instructions
Find the device manual for free BH0210003-1 Bromic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Patio Heater |
| Height | 2.2 m (87 in) |
| Base Diameter | 0.6 m (24 in) |
| Weight | 13 kg (28.7 lbs) |
| Fuel Type | Propane (LPG) or Natural Gas |
| Heat Output | 13,000 BTU/h (3.8 kW) |
| Ignition System | Electronic push-button ignition |
| Safety Features | Tip-over shut-off, oxygen depletion sensor, flame failure safety valve |
| Emissions Control | Low CO emissions, complies with local standards |
| Operation | Variable heat setting via control knob |
| Material | Stainless steel and powder-coated aluminum |
| Finish | Silver or black (depending on model) |
| Warranty | 1 year limited warranty |
| Certifications | CE, CSA, UL (varies by region) |
| Power Source | Battery for ignition (1x AA), no external power required |
| Installation | Freestanding, requires stable flat surface |
| Spare Parts | Burner assembly, thermocouple, gas valve, reflector, base |
| Maintenance | Clean nozzle and burner annually; check gas lines for leaks |
| Repairability | Moderate; most parts can be replaced by qualified professional |
Frequently Asked Questions - BH0210003-1 Bromic
What fuel does the Bromic BH0210003-1 use?
The BH0210003-1 uses propane (LPG) or natural gas. For propane, use a standard 20 lb tank. Always check the local gas pressure requirements.
How do I ignite the heater?
Turn the gas valve to 'On', push the ignition button repeatedly until the pilot lights. For electronic ignition, ensure the battery is installed. If the pilot flame is weak, clean the pilot orifice.
What safety features does this heater have?
It includes a tip-over shut-off switch, oxygen depletion sensor, and a flame failure safety valve that cuts gas flow if the flame goes out.
Can I use the heater indoors?
No. This heater is designed for outdoor use only. Using it indoors risks carbon monoxide poisoning and fire.
How do I clean the heater?
Turn off gas and allow heater to cool. Wipe exterior with damp cloth. Clean burner and reflector with mild soap and water. Check air intake for debris annually.
What is the heat output?
The heater provides up to 13,000 BTU/h (3.8 kW), sufficient to warm an area of about 15-20 m² (160-215 sq ft) depending on wind.
How do I replace the battery for ignition?
Locate the battery compartment near the ignition button. Remove the cover, replace with one AA alkaline battery, ensure polarity (+/-) is correct.
What spare parts are available?
Common spare parts include the burner assembly, thermocouple, gas valve, reflector, and base wheels. Contact Bromic or authorized dealers.
Why does the heater shut off after a few minutes?
This could be a dirty thermocouple or pilot. Clean both components. If the issue persists, the gas pressure may be too low or the oxygen sensor may be triggered (relocate to more open area).
Is the heater weather resistant?
The stainless steel body is weather-resistant, but it is recommended to cover the heater when not in use and store it indoors during heavy rain or snow.
User questions about BH0210003-1 Bromic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual BH0210003-1 - Bromic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BH0210003-1 by Bromic.