DPA100B6WDB-6 - Air-conditioner DANBY - Free user manual and instructions
Find the device manual for free DPA100B6WDB-6 DANBY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Portable monoblock air conditioner |
| Brand | Danby |
| Model | DPA100B6WDB-6 |
| Cooling capacity | 10,000 BTU/h |
| Recommended area | Up to 30 m² |
| Power supply | 115 V ~ 60 Hz |
| Power consumption | Approximately 1,000 W |
| Dimensions (W x D x H) | 50 x 30 x 70 cm |
| Net weight | 30 kg |
| Noise level | Approximately 52 dB (quiet) |
| Operating modes | Cooling, ventilation, dehumidification |
| Programmable timer | Yes (24 h) |
| Remote control | Included |
| Air filter | Washable and reusable |
| Water tank | Continuous drainage possible |
| Installation kit | Included (window kit) |
| Maintenance | Clean filter every 2 weeks |
| Safety | Frost protection, automatic shut-off in case of overheating |
| Spare parts | Available from Danby customer service |
| Repairability | Estimated repairability score: 6.5/10 |
Frequently Asked Questions - DPA100B6WDB-6 DANBY
How to install the Danby DPA100B6WDB-6 air conditioner?
Place the unit near a window, unfold the hot air exhaust hose and attach it to the provided window kit. Ensure the exhaust is unobstructed. Plug into a 115 V outlet.
What area can this air conditioner cool?
With a capacity of 10,000 BTU/h, it is suitable for an area up to 30 m² under normal insulation conditions.
How to clean the unit's filter?
Remove the filter from the back of the unit, wash it with warm soapy water, rinse and dry completely before replacing. Clean every 2 weeks.
Does the water tank need to be emptied manually?
In cooling mode, moisture is exhausted through the hot air hose. In dehumidification mode only, a collection tray fills up; empty it regularly or install a continuous drain hose.
Can I use an extension cord?
Using an extension cord is not recommended as it may cause a voltage drop. Plug directly into a grounded wall outlet.
How to set the desired temperature?
Use the remote control or control panel to select a temperature between 16°C and 30°C. The unit stops automatically when the set temperature is reached.
What to do if the unit does not turn on?
Check the electrical connection, fuse, and circuit breaker. Make sure the water tank is not full and the filter is clean. If the problem persists, contact customer service.
The air conditioner produces water, is this normal?
Yes, in cooling mode, humid air condenses. The water is typically evaporated in the hot air stream. If water leaks, check that the unit is level.
Can I use this air conditioner in winter for heating?
No, this model is a monoblock air conditioner with cooling function only. It does not produce heat.
Where to find spare parts for this model?
Contact Danby customer service or check their website. Common parts such as filters and remote controls are available.
User questions about DPA100B6WDB-6 DANBY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual DPA100B6WDB-6 - DANBY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DPA100B6WDB-6 by DANBY.