MACH4 Micro - Battery charger Core SWX - Free user manual and instructions

Product Type	Quad Battery Charger (MACH4 Micro)
Brand	Core SWX
Model	MACH4 Micro
Dimensions (H x L x W)	4.25 x 12.17 x 9.25 inches
Weight	5.3 lbs (2.4 kg)
Input Voltage	90-240 VAC, 50/60 Hz
Quick Charge Current	3.0 A per channel
Discharge Current	2.0 A
DC Output	90 W, 16 VDC
Operating Temperature	0°C to 40°C (32°F to 104°F)
Number of Charging Bays	4 (independent simultaneous)
Compatible Battery Chemistries	Li-ion (Core SWX, RED, Anton/Bauer, IDX and most)
LED Indicators	Green: standby/complete; Red: charging; Pulse Red/Green: trickle; Off: malfunction
Protection Features	Automatic detection of damaged batteries, fuse protection
Power Cord Included	Yes, universal AC cord
Ventilation	Rear ventilation slots and fan
Safety	Must be grounded; do not disassemble; check cables
Warranty	3 years parts and labor
Repair Procedure	RMA required via coreswx.com/repairsreturns
Country of Origin	USA
Manufacturer	Core SWX, LLC.
Contact	[e-mail], [phone]

Frequently Asked Questions - MACH4 Micro Core SWX

How do I know when the battery is fully charged?

The corresponding bay LED will turn GREEN, indicating charging is complete.

Can I charge different brands of batteries?

Yes, the MACH4 Micro is cross-compatible with RED, Anton/Bauer, IDX and most Li-ion battery packs. Contact Core SWX for confirmation of compatibility.

What does a flashing RED/GREEN LED mean?

It indicates the charger is in trickle charge mode, which may occur when the battery is in low voltage protection or near 100% charge.

What should I do if the LED is not illuminated?

If the LED is off, there is a bay malfunction. Remove the battery and try another bay. If the issue persists, contact Core SWX support.

Can I charge four batteries at the same time?

Yes, the MACH4 Micro has four independent charging bays that operate simultaneously and independently.

What is the input voltage range?

The charger accepts 90-240 VAC, 50/60 Hz, making it suitable for worldwide use.

What is the warranty period?

The warranty is 3 years for parts and labor, unless otherwise noted.

How do I get my charger repaired?

Go to http://www.coreswx.com/repairsreturns, fill out the online form, print the RMA confirmation, and ship the unit with the RMA and proof of purchase via UPS or FedEx.

Is the charger safe to use in hot environments?

The operating temperature range is 0°C to 40°C (32°F to 104°F). Avoid obstructing ventilation slots and the rear fan.

Can I replace the internal fuse myself?

The fuse can be replaced only with the same type and rating. Ensure the unit is unplugged first. If unsure, contact Core SWX.

USER MANUAL MACH4 Micro Core SWX

Exterior view of a black MACH processor unit with four internal components (no visible text or symbols on the device body)

MACH4 Series V-MT, B-MT, and G-MT Battery Charging System

Quad Instructional Manual

Introduction:

Thank you for your choice in purchasing a Core SWX MACH4 Charger. The charger is designed to provide you a safe and reliable charging platform for your battery packs.

Please read this manual to help understand and capitalize on the features of this charger.

Features:

• This charger will rapid charge any Li-ion battery pack within CoreSWX' product line.
• Automatic Universal AC input for world-wide use.
  •Automatic detection of damaged or misused batteries
• Cross-compatible battery charging for RED®, Anton/Bauer®, IDX® and most Li-Ion battery packs*

*contact Core SWX for confirmation of battery pack compatibility.

Operation:

• Insert included AC power cord to the rear of the unit and flip adjacent switch to ON(-)
• LEDs will illuminate GREEN signifying the corresponding battery charging bay is READY
• Connect a battery pack to any of the charge positions. The charger addresses all packs independently and simultaneously, so it doesn't matter which bay a battery pack is connected to.
• Corresponding bay LED will illuminate RED, advising communicating with the charger, and will being charging the pack.

LED Indication Guide:

Charge State LED

LED Indication

No Battery Connected

GREEN

Trickle Charge

Pulse RED/GREEN*

Charging Complete GREEN

Charge Bay Malfunction

LED not illuminated

*Trickle charge may occur when the battery pack is in low voltage protection or at/near 100%

Specifications:

MACH4 (Quad Charger):

Dimensions: H: 4.25" L: 12.17" W: 9.25"

Weight: 5.3lbs.

Electrical Data:

Input Voltage: 90\~240VAC, 50/60Hz

Quick Charge Current: 3.0A per channel

Discharge Current: 2.0A

DC output: 90w, 16VDC

Operational Temperature Range:

-0°C to +40°C (-32°F to +104°F)

Notes on Use:

• WARNING! Risk of electric shock. Do not remove cover, no user serviceable parts inside the product. Disassembling the product may void the warranty.
• WARNING! Risk of electric shock. Always check cables for signs of damage. Damaged cables can cause personal injury and/or damage the equipment.
• While operating the charger do not place any objects in front of ventilation slots or fan on the rear of the charger.
• WARNING! It is the responsibility of the local organization to ensure that the product is periodically checked for electrical safety in accordance with local regulations.
• WARNING! An increase in temperature is normal during operation. During discharge operation, the area on the top of the charger, to the rear may get very hot. This is marked by a warning. Be mindful of touching this area during operation.
• CAUTION! This product must be connected to a power supply of the same voltage (V) and current (A) as indicated on the product. Refer to the technical specifications for the product.
• CAUTION! AC Mains plug or appliance coupler is to be used as a power disconnect device; make sure it is readily accessible.
• CAUTION! The product must be grounded during operation

There is a fuse within the AC receptacle which can be replaced only with the same type and rating.

Warranty:

This product is warranted to the Original Purchaser against all defects in material and or workmanship for the period herein.

The warranty period shall be, 3 years for parts and labor, unless otherwise noted. Core SWX agrees to pay equal return freight costs to return the product the same method it was received. In the event of an issue, purchaser agrees to the below RMA procedure.

Procedure:

1. Go to http://www.coreswx.com/repairsreturns and fill out the online form
2. Print the RMA number confirmation, and ship the product needing service to Core SWX, LLC. along with RMA number confirmation, and copy of bill of sale.
3. All shipments must be done either through UPS or FEDEX, and insured if necessary
4. Core SWX, LLC. is not responsible for any lost shipments.

Core SWX reserves the right to repair or replace any defective product under warranty after Core SWX determines which is more practical.

If Core SWX receives defective product for warranty repair and they are found to be defective as a result of misuse or other damage, not caused by normal wear and tear, Core SWX will notify the customer of an estimate of repair. Customer will incur costs. There are no further warranties, either expressed or implied, including warranties of merchantability or fitness for a particular purpose that has any bearing upon this transaction.

91B Commercial St. Plainview NY 11803 USA

Web: www.coreswx.com Email: [e-mail]

Tel: [phone] Fax: [phone]

Copyright © 2022

All rights reserved

Disclaimer

The information contained in this manual is believed to be correct at the time of issuance. Core SWX, LLC. reserves the right to make the changes to the information or specifications without obligation to notify any person of such revisions or changes. Changes will be incorporated in new versions of the manual.

Core SWX, LLC. reserves the right to make changes to product design and functionality without notification.

Trademarks

All product trademarks and registered trademarks are the property of Core SWX, LLC. All other trademarks and registered trademarks are the property of the respective companies.