SLSVP25EUG - Safe SereneLife - Free user manual and instructions

Product Type	Digital Safe
Brand	SereneLife
Model	SLSVP25EUG
Exterior Dimensions (WxDxH)	25 x 20 x 20 cm (9.8 x 7.9 x 7.9 in)
Interior Dimensions (WxDxH)	24.5 x 19 x 19 cm (9.6 x 7.5 x 7.5 in)
Weight	5 kg (11 lbs)
Material	Alloy Steel
Lock Type	Electronic Keypad with LED Display
Power Source	4 x AA batteries (not included) or external 9V backup battery
Emergency Override	Key lock included
Mounting	Pre-drilled holes for floor/wall mounting (hardware not included)
Color	Black
Capacity	Fits A4 documents, laptop up to 15.6", jewelry
Security Features	Programmable code (3-8 digits), silent mode, alarm after 3 wrong attempts
Maintenance	Wipe with dry cloth; avoid liquids; change batteries annually
Spare Parts & Repairability	Contact SereneLife support for spare keys or lock replacement
Certifications	Not specified

Frequently Asked Questions - SLSVP25EUG SereneLife

How do I set the code for the first time?

Press the Program button on the inside panel. Then enter your desired 3-8 digit code followed by #. The green light will confirm. Test with the door open.

What should I do if I forget the code?

Use the emergency override key to open the safe. Then follow the reset procedure: press the reset button inside and set a new code.

How do I change the batteries?

Open the safe, locate the battery compartment on the inside of the door. Replace 4 AA batteries, ensuring correct polarity. The safe should operate normally.

Why is my keypad not responding?

Check if batteries are low (replace them). Also ensure the keypad is clean and dry. If still not responding, use the override key to open and check battery contacts.

Can I mount the safe to a wall or floor?

Yes, the safe has pre-drilled holes on the bottom and back. Use appropriate screws and anchors (not included) to secure it. Ensure it is level and stable.

What is the emergency low battery override?

If batteries are too low to power the keypad, you can temporarily connect an external 9V battery to the emergency terminal on the front panel to open the safe. Replace internal batteries immediately.

How do I set the silent mode?

Press the Program button, then enter 0 followed by # to toggle silent mode off/on. In silent mode, the safe will not emit beeps.

What happens after 3 wrong code attempts?

The safe will enter a lockout period (e.g., 20 seconds) and an alarm may sound. Wait for the lockout to end before trying again. Use the override key if needed.

Can I store passports or documents in this safe?

Yes, the safe is designed to hold documents, jewelry, and small valuables. The interior is padded to protect items. Ensure paper items are kept in a dry environment.

How do I clean and maintain the safe?

Wipe the exterior and interior with a soft, dry cloth. Do not use water or cleaning solvents. Check batteries every 6 months and replace when low to avoid corrosion.

USER MANUAL SLSVP25EUG SereneLife

Black square safe with a digital keypad and circular dial (no visible text or symbols)

SLSVP25EUG

Electronic Fingerprint Safe Box

USER GUIDE

About SereneLife

SereneLife products are designed to create a more comfortable living space, indoors and out. Our team presents innovative lifestyle solutions throughout the year that promote simplicity and serenity.

We're committed to delivering the most dependable products so you can live a better, more serene life.

CONTENTS

FEATURES AND TECHNICAL SPECS 4

SAFETY WARNINGS 5

OPERATION GUIDES 6

MAINTENANCE GUIDE 9

STORAGE GUIDE 10

REGISTER PRODUCT 11

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov

Features:

• Reinforced Heavy-Duty Steel Wall Construction
• Convenient Fingerprint Security Access
  • Corrosion & Stain-Resistant Powder Coat Finish
• The 1 mm laser-cut micro seam is key to making it resistant to prying and drilling.
• User-Friendly Touchscreen Interface
• 3 Ways to Open the Safe Box: (1) 3-12 Digits Codes, Smart Touch Screen Panel with Two Code Systems: User Code and Management Code (2) Fingerprint, can Remember 30 Fingerprints, and (3) With 2 Master Keys
• Removable Shelf Helps Organize Important Things Easily
  • Key Holders for 5 Keys on the Back of the Door to Keep Important Keys
• Internal LED Lights Allow to Find what is Needed in the Dark Quickly
• Inner Chamber furnished with flannelette to Prevent Valuables from Being Scratched or Damaged
• Comes Armed with a Dual Alarm System
• Low Battery Indicator
• Includes (2) Master Keys for Manual Safe Unlocking
• Perfect for Home, Office, or Business Use
• Arrives Fully Assembled

What's in the Box:

• Safe Box
• Footpad
• Fixing Bolt
  • (4) AA Batteries
  • (2) Owner Keys
  • (2) master keys

- Emergency Battery Box

Technical Specs:

• Construction Materials: Alloy Steel, Carbon Steel
• Steel Thickness: (Door) 0.12"; (Body) 0.06" -inch
• Item Weight: 15.81 lbs.
• Battery Operated Digital Panel: Requires 4 x AA Batteries (Included)
• Product Dimension (L x W x H): 13.77" x 9.84" x 9.84"-inches

Safety Warnings

1. Do not lock the master key or emergency battery box inside the safe. Keep them stored properly outside the safe.
2. This combination lock can support two independent passwords, each consisting of 3-12 digits. The initial user password is set to 123456 and should be changed immediately. The process for resetting the password is the same as for initially setting the password.
3. If a fingerprint has not been set by the user, any fingerprint can open the safe. It is important for the user to set their own fingerprint before using the safe.
4. If a mistake is made while entering the administrative password, press the "*" button to delete the incorrect code.
5. If the safe will not be used for a long period of time, remove the battery to prevent leakage that could damage the electronic system.

Accessories

1. Safe Body
2. Door
3. Control Panel
4. Owner Lock
5. Foot Pads
6. Override Lock
7. Backup Power Jack
8. Battery Compartment
9. Reset Button

Owner Keys: 2 Master Keys: 2 Emergency

Foot Pads: 4 Fixing Bolts: 2

Battery Box: 1

Operation Guides

Opening the Safe with the Master Lock and Installing the Battery

- Remove the master keyhole cover on the right side of the safe. Insert the master key and turn it counterclockwise to the limit position.

- Slide the owner keyhole cover on the left side and insert the owner key. Turn the key clockwise to the limit position.

- While turning the knob clockwise, open the safe.

- Once the safe is open, you will see a built-in battery box at the top back of the door. Open the battery box and insert 4 AA batteries.

- Securely fasten the battery box cover once the batteries have been installed.

Line drawing of a hand using a tool to adjust or install a mechanical component (no text or symbols present)

Set User Password

This method is used to modify the default user password "123456."

• After opening the safe, touch the screen to illuminate it.

- Press the "L" button twice. Then press the reset button located inside the safe.

- Enter your new password (3–12 digits) and confirm by pressing the "#" button.

- Verify the new password to ensure it is set correctly before closing the door.

Setting the Administrator Password

• After opening the safe, touch the screen to illuminate it.

- Press the "0" button twice. Then press the reset button located inside the safe.

- Enter your new password (3–12 digits) and confirm it by pressing the "#" button.

- Verify the new password to ensure it is set correctly before closing the door.

Fingerprint Setting

• After opening the safe, press the reset button located inside the safe.
• You will hear two short beeps, indicating it is ready to accept your fingerprint. Place your finger on the scanner four times.
• A long beep will sound each time a fingerprint is successfully entered. If you hear three short beeps, the input failed and you should try again.
• The safe can store up to 30 fingerprints.
• Test the registered fingerprint to ensure it works correctly before closing the door.

Open the Safe by Password

• Touch the screen to illuminate it.
• Enter your password, then press "#" to confirm.
• Slide the owner keyhole cover on the left side.
• Insert the owner key and turn it clockwise to the limit position.

Open the Safe by Fingerprint

• Place your fingerprint on the collector. You will hear a long beep to confirm successful access.
• Slide the owner keyhole cover on the left side.
• Insert the owner key and turn it clockwise to the limit position.

If the password or fingerprint entry is unsuccessful, a beeping error tone will be heard.

Alarm and Reset

Continuous Wrong Code Alarm: If three incorrect password attempts or five incorrect fingerprint attempts are made, the alarm will sound for 30 seconds.

To stop the alarm:

1. Enter the correct password.
2. Use the master key to open the safe.

3. Use the backup battery case:

4. Open the backup battery case.

5. Insert 4 AA batteries into the battery case.
6. Plug the emergency power cord into the power jack located at the bottom side of the control panel.

With the battery-powered supply, you can now open the safe. Once the safe is open, enter the correct password or use your fingerprint to access the safe.

Vibration Alarm

• Press the "*" button to enable vibration alarm mode.
• When the safe experiences a strong impact, an alarm will sound.
  • To stop the alarm, enter the correct password.

Line drawing of a safe with a hand hammer striking it, no text or symbols present

Low-Voltage Reminder

• The safe requires four 1.5V alkaline batteries. If the voltage is insufficient, the buzzer will beep twice after opening the safe to remind you that the batteries need to be replaced.
• If the battery voltage is too low to open the safe, use the backup power supply or master key.

Restoring to Factory Default

• In standby mode, press and hold the reset button inside the safe for approximately 5 seconds.
• You will hear a long beep, indicating that all fingerprints and passwords have been successfully deleted, and the safe has been restored to factory settings.
• You can now add a new password and fingerprint following the instructions above.

Installation and Fixing

• Place the safe in the desired installation location and mark the mounting holes inside the safe.
• Remove the safe and drill two holes at the marked positions.
• Insert the fixing bolts into the drilled holes and remove the screws from the bolts.

Simple diagram showing two circles on a horizontal surface with a hatched ground line below (no text or symbols)

Diagram showing a hammer striking a brick wall with a horizontal bar, no text or symbols present

Maintenance Guide

1. Cleaning: Regularly clean the exterior of the safe with a soft, dry cloth to remove dust and fingerprints. Avoid using abrasive cleaners or harsh chemicals, as these can damage the safe's surface.

2. Lubrication: Periodically apply a small amount of lubricant to the keyhole and hinges to ensure smooth operation. Avoid over-lubricating, as excess oil can attract dust and dirt.

3. Battery Maintenance: Check the batteries regularly and replace them if you notice low-voltage reminders such as the buzzer beeping twice after opening the safe. If the safe will not be used for an extended period, remove the batteries to prevent leakage that could damage the electronic system.

4. Hardware Inspection: Inspect the safe's locking mechanism and hinges periodically to ensure they are working correctly. Tighten any loose screws or bolts to maintain the safe's structural integrity.
5. Preventing Moisture Damage: Ensure the safe is placed in a dry location to prevent moisture damage. If the safe is exposed to moisture, wipe it dry immediately.

Storage Guide

1. Location: Store the safe in a secure, dry location away from direct sunlight and moisture to prevent warping and damage. Place the safe in a discreet location to avoid attracting unwanted attention.
2. Key and Password Security: Keep your owner and master keys in a separate, secure location away from the safe. Avoid writing down passwords or fingerprints near the safe to maintain security.
3. Backup Battery Case: Store the backup battery case in a safe place, accessible if needed for emergencies.
4. Long-Term Storage: If storing the safe long-term without use, remove the batteries and ensure the safe is locked securely. Periodically check the safe and its components for any signs of wear or damage during storage.

By following these maintenance and storage guidelines, you can ensure the safe remains in good working order and retains its security features over time.

Register Product

Thank you for choosing SereneLife. By registering your product, you ensure that you receive the full benefits of our exclusive warranty and personalized customer support.

Complete the form to access expert support and to keep your SereneLife purchase in perfect condition.

Serenelifehome.com/ register

serenelife™

Questions or Comments?

We are here to help!

Phone: [phone]

Serenelifehome.com/ContactUs