AZSLSFE348 - Safe SereneLife - Free user manual and instructions

Product Type	Safe
Brand	SereneLife
Model	AZSLSFE348
Category	Electronic Security Safe
Dimensions (External)	Approx. 8.7 x 6.3 x 6.3 inches (22 x 16 x 16 cm)
Weight	Approx. 4.4 lbs (2 kg)
Power Supply	4 x AA batteries (not included)
Lock Type	Electronic keypad with backup key
Material	Steel
Color	Black / Dark Gray
Security Features	Programmable PIN code, tamper alarm, dual locking bolts
Battery Type	AA alkaline recommended
Backup Key	2 emergency override keys included
Alarm	Tamper alert when wrong code entered 3 times
Mounting Options	Pre-drilled holes for floor or wall mounting (hardware not included)
Care Instructions	Wipe with dry cloth; avoid abrasive cleaners
Included Accessories	Safe unit, 2 backup keys, instruction manual
Warranty	1-year limited manufacturer warranty

Frequently Asked Questions - AZSLSFE348 SereneLife

How do I program a new PIN code on the SereneLife AZSLSFE348 safe?

To set a new PIN, open the safe with the existing code or emergency key. Press the SET button inside (or follow the manual). Enter a 3-8 digit code, then press SET again. Test with the door open.

What should I do if I forget the PIN code?

Use the emergency override key to open the safe. Insert the key into the keyhole (usually hidden behind a cover) and turn. Once opened, you can reset the PIN using the SET button.

How do I reset the safe to factory settings?

Open the safe, remove the battery cover, take out the batteries, wait 30 seconds, then reinsert them. The safe should revert to the default PIN (often 1-2-3-4 or 0-0-0-0). Check the manual for the exact default.

How often should I replace the batteries?

Replace the 4 AA batteries when the low battery indicator (if present) appears, or every 6-12 months. Use fresh alkaline batteries for best performance.

Can the safe be mounted to a wall or floor?

Yes, the safe has pre-drilled mounting holes at the bottom and back. Use appropriate screws and anchors for your surface (not included). This helps prevent theft.

What are the external dimensions of the SereneLife AZSLSFE348?

The external dimensions are approximately 8.7 x 6.3 x 6.3 inches (22 x 16 x 16 cm). Internal space is slightly smaller; suitable for small valuables.

What is the safe made of?

The safe is constructed from solid steel, providing durability and basic security against forced entry.

Does the safe have a tamper alarm?

Yes, if an incorrect PIN is entered three times in a row, the safe will sound a loud alarm and lock out for a period. This deters unauthorized access.

What is the weight of the safe?

The safe weighs approximately 4.4 pounds (2 kg), making it relatively lightweight but still sturdy. Mounting is recommended for added security.

How do I clean and maintain the safe?

Wipe the exterior with a damp, soft cloth and mild detergent if needed. Do not use abrasive cleaners. Keep the keypad dry to prevent damage.

USER MANUAL AZSLSFE348 SereneLife

White square metal safe with a digital display and circular dial, placed on a patterned surface (no text or symbols visible)

INTELLIGENT

ELECTRONIC SAFE

USER MANUAL

Dear valued customer,

Thank you for choosing our products! You've taken an important step in organizing and protecting your most valued possessions. Every series of our safes is professionally made and designed to provide safety. Please take time to read and familiarize yourself with the proper operating procedures of your new safe presented on the following pages.

Again, thank you for choosing our products!

DIAGRAM

! Please do not keep emergency keys in your safe!

Schematic drawing of case

Schematic drawing of control panel

1. Bolts
2. Reset Button
3. Battery Compartment

4. Knob(Master Key)

5. Emergency Lock Cover

6. Clear Key
7. Start & Confirming Button

OPENING YOUR SAFE FOR THE FIRST TIME

Upon first opening, users should open the safe with the emergency key. The operation in details refers to “opening the safe with the emergency key”.

• Remove emergency lock cover, then insert the emergency key, and turn it counterclockwise.
  • Turn the knob (master key) clockwise to open the door.

NOTE: Finish operation, pull out the emergency key and keep it in a safe place.

INSERTING THE BATTERIES

• Open the door with the emergency key.
• Insert 4AA batteries into the battery compartment.
• With power supply firstly, LCD scans, then displays "GOOD", and goes to sleep.
  • The safe is ready.

NOTE: Change the batteries when LCD displays "LO-BATTE".

OPENING THE DOOR

• Press the “#” key.
• Input your user code (3 to 8 digits), then press “#” key to confirm and LCD displays “OPEN”.
  • Turn the knob clockwise and open the door within 6 seconds.

NOTE: The initial user code is "1234", the initial master code is "123456". If the code is wrong, LCD displays "ERROR", and back to "----". If the wrong code is entered 3 times consecutively, an alarm will sound for 20 seconds and the safe will be locked out for 3 minutes. You may press the key "*" to clear any incorrect digit you have input.

Line drawing of a portable electronic device with a circular vent and control panel (no text or symbols)

Line drawing of a portable electronic device with a circular dial and control panel (no text or symbols)

Diagram of a digital multimeter with a rotary dial and control panel (no text or symbols)

CLOSING THE DOOR

• Turn the knob (master key) counter-clockwise to close the door.

SETTING THE USER CODE

• With the door open, press the reset button once, LCD will show “----” with “BI” sounds.
• Input your new user code(3-8 digits), press “#” key to confirm.
• LCD will read "IN" with "DI-DU" sounds, which means the new code is accepted successfully.

SETTING THE MASTER CODE

• With the door open, press "#" key to start the keypad, then press "0" twice, and then press reset button once, LCD will show "----" with "BI" sounds twice.
• Input your new master code(3-8 digits), and press "#" to confirm.
• LCD will read "IN", which means the new code is accepted successfully.

SECURITY DISPLAY FEATURE

Your safe is equipped with a security display feature, using this feature means that your code will not be displayed on screen when opening safe.

• Press “#” to startup the lock.
• Press “*” in touch screen to startup the hidden code function. Any code you input will show “----” in the display, which can ensure your code safe.
• You can press “*” twice to cancel this function.

TAMPER ALARM

• You may set a tamper alarm that will sound if anyone attempts to move or attack the safe.
• Press the “*” key, the display will show “ALERT on”.
• The safe will alarm when it is vibrated. To turn alarm off, press the “#” key, input the current code, and then press “#” to confirm. If code is wrong though, the alarm will stop after 20 seconds, but the warning state is not released (It will alarm once it is vibrated).

OPENING THE SAFE IN AN EMERGENCY

Upon first receipt of the safe, or either the electronic circuit malfunction or codes unknown. You could also use the emergency key to open the safe.

• Remove the cover of the emergency lock.
• Insert the emergency key to the key hole, turn counter-clockwise, then turn the knob (master key) clockwise to open the door.

Line drawing of a vintage-style analog device with a circular dial and control panel (no text or symbols)

Line drawing of a portable electronic device with a dial and control panel (no text or symbols)

Line drawing of a person inside a digital timer and calculator (no text or symbols)

Illustration of a digital multimeter with a dial and pointer, no text or symbols present

MOUNTING METHOD

• Fix the safe in the place which is not easy to move.
- Drill holes for expansion bolts (or clamping screws) in the right place.
• Turn the expansion bolts counter clockwise to separate.
• Use the expansion bolts (or clamping screws) to secure the case to the wall.
• Make sure the case is mounted in place as required and then tighten all screws.

! CAUTION: Use the expansion bolt when there is a concrete wall surface. Use the clamping screw when there is a wooden wall surface.

A

B

SereneLife™