CM4304 - Weather Station ClimeMET - Free user manual and instructions

USER MANUAL CM4304 ClimeMET

Weather Dials

by ClimeMET

Available Dials:

Barometer, Clock, Thermometer, Hygrometer, Combined Weather Dial, Tide Clock & Moon Phase Clock

Available Colours:

Slate Grey, Classic Cream, Rose Copper, Golden Bronze & Limited Edition Brushed Silver

Combined Weather Dial

Welcome to your ClimeMET weather dial, designed by a team of outdoor enthusiasts in rural Suffolk. Let us help you make the most of the great outdoors.

Our ClimeMET Combined Weather Dial is designed to provide temperature, humidity and pressure readings in one place, perfect for those who love being outside. For optimum results, it is necessary to calibrate the barometer part of the weather dial to your local barometric pressure before use. The barometer is designed to give accurate air pressure readings from sea level to an altitude of 7000 feet.

Features

Measurement range: Temperature -40 to 60°C; -40 to 140°F. Humidity 0-100% RH.

Pressure 726-789 mmHg; 968-1052 hPa.

Accuracy: +/- 1°C; +/-5%RH.

Location

Position your combined weather dial in an area where it can remain undisturbed. Do not position in direct sunlight and avoid sources of heat and humidity that are not representative of the area you are looking to measure, such as a kettle.

Setting Up Your Weather Dial

- Establish the current pressure for your location by visiting www.bbc.co.uk/weather.

- Adjust the needle via the turn screw on the back of the dial to set the current barometric pressure. Do not over-tighten the barometer movement as this can damage the mechanism.

- Hang the weather dial in your desired location using the keyhole fitting on the back and leave for a few days to acclimatise.

Reading Your Weather Dial

- Increasing pressure (movement of the needle in a clockwise direction) suggests improving weather. Decreasing pressure (movement of the needle in an anti-clockwise direction) suggests deteriorating weather. Steady pressure, typical of extended periods of fine weather, suggests more of the same conditions.

- Use the outer thermometer scale to read current air temperature in ^ C and the inner scale for ^ F.

- Use the hygrometer scale to read current humidity in %RH.

Using The Pressure Pointer

The settable pointer, controlled by the knob in the centre of the dial face, can be used to show changes in atmospheric pressure. To do this, move your settable pointer until it rests exactly over the internal needle. The next time you observe your dial, any change in pressure will be highlighted by looking at the difference in position of the two pointers.

Engraved dials and all mount boards are suitable for indoor use only. Weather dials requiring a battery can only be used outdoors with a battery cover and if sheltered.

Find our complete range of matching full size and mini weather dials at www.climemet.com.