BSB210DWS - Soundbar BLAUPUNKT - Free user manual and instructions

Product Type	Soundbar with wireless subwoofer
Brand	Blaupunkt
Model	BSB210DWS
Soundbar Dimensions (W x D x H)	810 x 70 x 58 mm
Subwoofer Dimensions (W x D x H)	120 x 220 x 397 mm
Net Weight	3.85 kg
Gross Weight	5.4 kg
Power Supply	18 VDC, 1.3 A
Total Output Power	80 W (20 W x 2 + 40 W)
Frequency Response	50 Hz – 15 kHz
Bluetooth Version	5.0
Bluetooth Range	Up to 10 m
Inputs	HDMI ARC, Optical, AUX (3.5 mm), USB
Audio Return Channel (ARC)	Yes, via HDMI
EQ Modes	Music, Movie, Bass, News, Game
3D Surround Sound	Yes, via remote button
Remote Control Battery	2 x AAA (not included)
Cleaning Instructions	Unplug unit; use only a dry cloth
Safety Warning	Do not expose to rain, moisture, or liquids
Wall Mounting	Must be performed by qualified personnel
Customer Support	[e-mail]

Frequently Asked Questions - BSB210DWS BLAUPUNKT

How do I pair my Bluetooth device with the soundbar?

Press the MODE button on the remote or the M button on the soundbar to select BT mode. The soundbar will automatically enter pairing mode. On your device, search for 'BSB210DWS' and select it. Once connected, the LED will stop flashing.

Why is there no sound from the subwoofer?

Ensure both the soundbar and subwoofer are powered on and the subwoofer's LED is solid red. If the LED flashes red, press the PLAY/PAUSE button on the soundbar twice quickly to re-establish the wireless connection.

Can I control the soundbar volume with my TV remote?

Yes, if you connect via HDMI ARC and your TV supports CEC. Enable HDMI CEC in your TV settings and set the soundbar to HDMI mode. The TV remote can then adjust the soundbar volume.

How should I clean the soundbar?

Always unplug the unit from the power socket before cleaning. Use only a dry cloth to wipe away dust or marks. Do not use chemical cleaners, wet cloths, or allow liquids to enter the unit.

What are the different EQ modes and how do I use them?

The soundbar has five EQ modes: Music, Movie, Bass, News, Game. Press the corresponding button on the remote control to toggle between them. Each mode optimizes sound for different content.

My remote control is not working. What should I check?

First, ensure you are pointing the remote directly at the sensor on the front of the soundbar (within 5 m). Check the batteries are inserted correctly with +/‑ aligned and replace them if needed. Also reduce distance and remove obstacles.

How do I connect the soundbar to my TV?

You can connect via HDMI ARC, Optical, or AUX cable (not supplied). For HDMI ARC, connect to the TV's ARC port and select HDMI mode on the soundbar. For optical, connect and select OPTICAL mode. Ensure your TV audio output is set to PCM or Dolby.

What is the maximum Bluetooth range?

The Bluetooth range between the soundbar and your device is up to 8 metres (approximately). Walls and obstacles can reduce this range. If the signal is weak, the soundbar may disconnect temporarily.

How do I reset the soundbar?

If the unit is unresponsive, disconnect the DC power plug from the socket, wait a few seconds, then reconnect and turn the unit on again using the power button on the side panel or remote.

Can I mount the soundbar on the wall?

Yes, but wall mounting must be carried out by qualified personnel. Incorrect installation may cause injury or damage. Ensure adequate ventilation: at least 20 cm above and 5 cm on each side.

USER MANUAL BSB210DWS BLAUPUNKT

CONTENTS

General	Safety	Instructions
Remote	Control
Product	Overview
Controls	and	Connections
First	Time	Setup	with	SUBWOOFER
General	Operations
Pairing	your	soundbar
Troubleshooting				14
Specifications				15
Specifications

GENERAL SAFETY INSTRUCTIONS

Read this manual thoroughly before you start using the Soundbar.

Store this manual, the completed warranty card, your receipt and the product packaging.

The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to.

Please follow all instructions and take notice of all warnings.

IMPORTANT INFORMATION

• Only using furniture that can safely support the Products.
• Ensure the Product is not overhanging the edge of the supporting furniture.
• Do not place the product on a high furniture without securing both the furniture and the product to a stable support.
• Do not place the product on cloth or other conductive materials.
• Warn children of the dangers of climbing on furniture to reach the soundbar or its controls and to call for an adult to assist.
• Do not expose this product to rain or moisture as it may result in fire or an electric shock hazard
• Do not temper or change or modify the product in any way.
• Only use Accessories outlined and recommended by the manufacturer.
• Please do not expose the product to splashing or water contact.
• Please do not place any object on top of the product.

GENERAL SAFETY INSTRUCTIONS (Cont.)

Please follow the instructions when installing this product in accordance with the instruction manual. This product must be positioned in a sufficiently stable location; it can be potentially hazardous due to falling when mounted and can cause injury, particularly to children if it is positioned incorrectly.

• Before installing this Soundbar, make sure your outlet voltage corresponds to the voltage stated on the power supply rating label.
• The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the product. Dry location use only.
• No naked flame source, such as candles, should be placed on the product.
• Ventilation should not be impeded by covering the ventilation openings.
• Do not plug several devices into the same outlet. Doing so may cause the outlet to overheat and start a fire. Make sure the outlet is readily accessible during operation of the equipment.
• No naked flame source, such as candles, should be placed on the product.
• Unplug the Soundbar during lightning storms or when unused for long periods of time. Not doing so may result in fire or electric shock.
• Do not cover the ventilation openings of the product with items such as newspapers, tablecloths, curtains, etc. Do not insert objects into the slots available on the product. This could result in the product being damaged and could cause a fire.

GENERAL SAFETY INSTRUCTIONS (Cont.)

• If you notice any unusual odors or smoke around the unit, immediately disconnect the unit from the outlet and contact the service center. Failure to do so may result in fire or electric shock.
• When not using the unit for long periods of time or when you are moving the unit, please ensure to disconnect the power supply from the wall socket.
• Please be aware that dust could accumulate over time on the unit and cause it to generate heat and/or deteriorate insulation, which in turn may result in an electrical fire.
• The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age. They must be supervised by a person responsible for their safety.
• Batteries from the remote control must be removed only by an adult. The adult must ensure to keep them out of reach of infants and children. Seek medical attention immediately if a child has swallowed a battery.
• To maintain the product, do not use any chemical or cleaning agent or wet cloth. Please only use a dry cloth to wipe it down from marks or dust, and only after unplugging the product from the power socket.
• Please ensure to contact our call center for any repair or service required for the products.
• Wall mounted installation must be carried out by qualified personnel only. Incorrect installation may result in severe personal injury, electric shock and/or fire hazard.

Please make sure upon positioning this product, the place is:

• Not wet or damp and well ventilated.
• Away from direct sunlight or heaters.
• Away from splashes or food.
• Protected from excessive dust or grease.
• Do not place this equipment in a confined space such as a bookcase or similar unit. Allow 20cm above and 5cm spacing on both sides for proper ventilation.
• Do not place the Soundbar near heat sources such as radiators, stoves or other audio visual equipment that produce heat.
• Do not place containers with liquids. If liquid falls inside the products, it may result in short-circuit, fire or electric shock.
• Do not place small metallic objects on top of the unit.
• Do not use or store flammable or combustible materials near the unit. Doing so may result in fire or explosion. Do not place any naked flame sources, such as lit candles, cigarettes, or incense sticks on top of the soundbar.

REMOTE CONTROL

• The remote control has a reception range of approximately 5m. Be sure to point the remote control directly at the sensor at the front of the soundbar.
• Make sure there are no obstacles in the way. This will interfere with the sensor strength.
• Handle the remote control carefully. Please do not drop, apply shock, or step on it.
• Do not spill water on it.
• Using the remote control while operating other remote controls that use infrared rays near the unit may cause it to operate incorrectly.
• If you do not intend to use the remote control for a period of a month, remove the batteries to prevent battery leakage or corrosion.

REMOTE CONTROL (CONT.)

CAUTION!

Battery Precautions

• Do not use batteries other than the one specified in this manual.
• Danger of explosion if incorrectly replaced by a battery other than the one specified.
• Do not store the battery with other metallic objects, as doing so can cause the battery to short-circuit, leak, or explode.
• Ensure the battery is not exposed to excessive heat, direct sunlight, or fire.
• Do not try to short-circuit, disassemble or throw the battery into a fire.
• Dispose of batteries promptly and correctly, observing any local hazardous waste regulations.

To insert new 2 x AAA batteries or replace current batteries, at the back of the remote control remove the cover of the battery compartment and insert the 2 x AAA batteries ensuring that the + sign on the battery is facing toward the + sign marked within the battery compartment.

PRODUCT OVERVIEW

1: HDMI(ARC) INPUT 2: USB PLAYBACK 3: OPT: OPTICAL INPUT 4: AUX IN (3.5M) 5: DC IN

OFF: SHORT PRESS - POWER ON

ON: SHORT PRESS FOR MODE CHANGE

LONG PRESS TO POWER OFF

PLAY/PAUSE

VOLUME UP

VOLUME DOWN

CONTROLS AND CONNECTIONS

HDMI

Connect a HDMI cable (not supplied) from your TV HDMI/ARC port to the HDMI socket on the soundbar. Then change the mode on your soundbar to HDMI Mode.

Note: To enable the Audio Return Channel (ARC) feature, the HDMI must be connected to an ARC enabled HDMI on your TV. (go to next page for details on ARC).

OPTICAL

Plug in the optical cable (not supplied) from your Soundbar to the TV optical port.

Once connected, change the Mode to OPTICAL from the unit or remote control.

Note: If there is no sound, make sure that the audio settings on your TV is set to appropriate mode.

IMPORTANT INFORMATION

This unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM or Dolby (Refer to the user manual of the input source device for its audio setting details) with optical.

CONTROLS AND CONNECTIONS (Cont.)

AUDIO RETURN CHANNEL (ARC) / HDMI

ARC function is used for connecting the Soundbar to the TV with a HDMI cable through an audio return channel. This means you can listen to the TV sounds through your Soundbar via HDMI cable.

To enjoy the HDMI ARC Mode

1. Make sure the Soundbar is connected to the TV HDMI(ARC) port.
2. Ensure the Soundbar is set to HDMI Mode
3. The sound should relay through the soundbar and you can also adjust the volume of the sound thats coming through the soundbar with your TV remote control.

Note: If the sound does not automatically produce from the soundbar, TVs may need to be set onto HDMI (CEC) turned on within the TV settings, with some of them having options to turn on ARC mode directly.

FIRST TIME SETUP WITH SUBWOOFER

To connect Subwoofer and Soundbar successfully

1. Connect the adapter to the soundbar & subwoofer DC IN, and plug the power cable into the electrical outlet.
2. While the soundbar is ON and in Bluetooth mode, power ON the subwoofer and it will be waiting for the connection.
3. Press the PLAY/PAUSE button on the soundbar twice quickly, you'll hear a prompt sound, which means the subwoofer will now automatically begin connecting to the soundbar.
4. When the subwoofer has connected to the soundbar, the subwoofer LED indication light will turn to solid red.
5. If the connection failed or is disconnected, the indicator will begin flashing red. Press the PLAY/PAUSE button on the soundbar twice again to try reconnecting.

GENERAL OPERATION

During On mode, press either buttons on RC for AUX, BT / OPTICAL / HDMI / AUX / USB - OR the M button on the side of soundbar. Operate your audio device directly for playback features.

Turning on/off the unit

1. Insert the output cable from the DC adapter into power socket on the rear of the Sound Bar.
2. Connect to DC mains plug into socket outlet properly.
3. Press the power button on the right side panel of Sound Bar or top of remote control to power on the unit.
4. Long press power button on the Sound Bar or press the button on the remote control to switch off the unit.

Music source selection

Press the "M" button on side of soundbar or select one of the modes on the RC that is indicating the mode you want to select.

Volume adjustment

Press the Volume +/- button on the remote or on the side panel of the Sound Bar to adjust the sound level to the desired level.

Mute function

When listening to music in any mode, press the mute button on the remote control to activate the mute function. Press it again or press the volume +/- button to cancel the mute function.

EQ function

Press any of the EQ MODE buttons on the remote control to toggle among the different sound effects.

PAIRING YOUR SOUNDBAR

Pairing with a Bluetooth Enabled Device:

Before you play music from your Bluetooth device, it needs to be paired with the Soundbar.

1. Once powered, press the MODES button on the remote control or the M button on the Soundbar to select BT mode.
2. When first entering BT mode, the Soundbar will automatically enter pairing mode. On your smart device, select to search for devices.
3. Select "BSB210DWS" in the list of devices that appear. The Soundbar LED showing BT mode will stay on and stop flashing once there is a successful connection.
4. To disconnect/unpair the devices, switch to another mode on the Soundbar or disable Bluetooth on your device, or unpair the Soundbar from your smart device in settings.
5. Play your favorite music once you are connected.

NOTES:

• The Bluetooth range between the soundbar and your device is up to approx. 8 metres. Obstacles may reduce connectivity range.
• This Soundbar may not be compatible with all Bluetooth devices.
• With a weak signal, your Soundbar may disconnect from your device, but it will continue to stay in Bluetooth mode until the signal strengthens.
• If you already have a device connected to the Soundbar, press and hold the

PLAY/PAUSE button for the unit to go into pairing mode with the current connection being disconnected.

TROUBLESHOOTING

Never try to repair the soundbar yourself. If you encounter any problems when using this unit, check the following points before seeking service.

Problem Solution
No Power • Ensure that the Switching Adaptor is connected to power socket outlet.• Ensure that there is power at the DC outlet.• Press standby button to turn the unit on.
Remote control does not work	• Before you press any SOURCE button, first select the correct source.• Reduce the distance between the remote control and the unit.• Insert the battery with its polarities (+/-) aligned as indicated.• Replace the battery.• Aim the remote control directly at the sensor on the front of the unit.
No response from the unit	• Disconnect and reconnect the DC power plug, then turn the unit on again.
I can’t find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing	• Ensure the Bluetooth function is activated on your Bluetooth device.• Ensure you have paired the unit with your Bluetooth device.
No connection between the main unit and the subwoofer	• Ensure the mains cables of the main unit and the subwoofer are both connected securely to the mains power socket.

SPECIFICATIONS

Power Supply 18VDC, 1.3A
Output Power Total: 20W*2 + 40W
Frequency Response 50Hz to 15kHz
Bluetooth 5.0, A2DP, AVRCP
Bluetooth Range Up to 10m
Dimensions	Soundbar: 810 (w) x 70 (d) x 58 (h) mmSubwoofer: 120 (w) x 220 (d) x 397 (h) mm
Weights Net: 3.85 kg / Gross: 5.4 kg

Bluetooth®

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Ayonz Pty Ltd is under license. Other trademarks and trade names are those of their respective owners.

BLAUPUNKT

CUSTOMER SUPPORT:

[e-mail]

DISTRIBUTED BY:

Ayonz Pty Ltd