LS 200e - Soundbar BLAUPUNKT - Free user manual and instructions

Product Type	Soundbar
Brand	Blaupunkt
Model	LS 200e
Dimensions (W x H x D)	Approx. 800 x 70 x 100 mm
Weight	Approx. 2.5 kg
Power Supply	AC 100-240 V, 50/60 Hz
Power Consumption (typical)	30 W
Standby Power Consumption	< 0.5 W
Wireless Connectivity	Bluetooth 5.0
Audio Inputs	HDMI ARC, Optical, AUX, USB
Remote Control	Included
Speaker Configuration	2.0 channel
Total Power Output	40 W RMS
Frequency Response	50 Hz - 20 kHz
Impedance	4 Ohms
Cleaning Instructions	Wipe with a soft, dry cloth. Do not use solvents.
Safety Warnings	Do not expose to rain or moisture. Keep away from heat sources.
Spare Parts & Reparability	Contact Blaupunkt support for genuine parts. Repairs by qualified personnel only.
Environmental Information	Compliant with RoHS and WEEE directives.
Country of Origin	China

Frequently Asked Questions - LS 200e BLAUPUNKT

How do I connect the soundbar to my TV?

Use the HDMI ARC, optical cable, or AUX input. For Bluetooth, pair via the Bluetooth button on the remote.

Can I control the soundbar with my TV remote?

Yes, if your TV supports HDMI ARC or CEC. Connect via HDMI ARC and enable CEC on both devices.

How do I reset the soundbar to factory settings?

Press and hold the Power button for 10 seconds until the LED flashes rapidly.

Why is there no sound from the soundbar?

Check the volume level, input source, and cable connections. Ensure the soundbar is not in mute mode.

Can I use the soundbar as a standalone Bluetooth speaker?

Yes, select Bluetooth mode and pair with your phone or tablet.

How do I clean the soundbar?

Use a soft, dry cloth. Avoid liquids, harsh chemicals, or abrasive materials that may damage the surface.

What is the warranty period for the LS 200e?

The standard warranty is 2 years from the date of purchase. Contact Blaupunkt support for details.

Can I mount the soundbar on a wall?

Yes, the soundbar has keyhole slots on the back. Use appropriate screws and wall anchors (not included).

How do I update the firmware?

Firmware updates are not typically required. If available, instructions will be posted on the Blaupunkt website.

What does the LED indicator mean?

Solid blue: Bluetooth connected. Flashing blue: pairing mode. Red: standby. Green: optical/HDMI input.

USER MANUAL LS 200e BLAUPUNKT

LS 200e

www.blaupunkt.com

TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE

LIGHTNING FLASH WITH ARROWHEAD SYMBOL - within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

EXCLAMATION POINT -

POINT - within an equilateral triangle, is used to indicate that a specific component shall be replaced only by the component specified in that documentation for safety reasons.

To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate this product. This will assure you years of trouble-free performance and listening pleasure.

ESD Warning

The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please move the product to another location, or re-plug the power.

Important Notes

• This sound bar is only suitable for LED/LCD/Plasma TV. The operation with CRT TV is not recommended. It can originate interferences in the image. This safety and operating instruction should be retained for future reference.

- The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom.

- Do not install the product in the following areas: - Places exposed to direct sunlight or close to radiators - On top of other stereo equipment that radiate too much heat - Blocking ventilation or in a dusty area - Areas where there is constant vibration - Humid or moist places.

• Do not place near candles or other naked flames.
• Operate the product only as instructed in this manual.
• Before turning on the power for the first time, make sure the power adaptor is properly connected.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside, refer all servicing to qualified service personnel.

CE Conformity

Model number: LS 200e

Description: 2.1ch Soundbar System with Bluetooth

Brand name: Blaupunkt

Responsible party: M3 Electronic GmbH

Gutenbergstrasse 5, D-65830 Kriftel. Germany

Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares that this Class 1 equipment is in compliance with the essential requirement and other relevant provisions of Directive 1999/5/EC.

Letter of conformity can be obtained from [e-mail].

Safety Instructions

1. READ INSTRUCTIONS – All the safety and operating instructions should be read before appliance's operated.
2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS – All warnings on the appliance and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS – All operating instructions should be followed.
5. WATER AND MOISTURE – The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
6. VENTILATION – The appliance should be situated so that its location or position does not interfere with its proper ventilation. Do not place on bed, sofa, rug or similar surface that may block the ventilation openings, in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
7. HEAT – The appliance should be situated away from heat sources such as radiators, stoves, or other appliances (including amplifiers) that produce heat.
8. POWER SOURCE – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
9. POWER CORD PROTECTION – Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them.
10. POWER LINES – an outdoor antenna should be located away from power lines.
11. OBJECT AND LIQUID ENTRY – care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
12. ESD WARNING – the display does not function properly or not reaction to operation of any the control may due to the electrostatic discharge. Switch off and unplug the set. Reconnect after a few seconds.
13. DAMAGE REQUIRING SERVICE – the appliance should be serviced by qualified service personal when: a. the power-supply cord or plug has been damaged. b. Objects have fallen into, or liquid has been spilled into the appliance enclosure. c. The appliance has been exposed to rain. d. The appliance has been dropped, or the enclosure damaged. e. The appliance does not appear to operate normally.
14. SERVICING – the user should not attempt to service the appliance beyond that described in the user operation instructions. All other servicing should be referred to qualified service personnel.
15. DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between the pieces of equipment) are properly made and in accordance with the manufacturer's instructions. Switch off and unplug the power before making or changing connections.
16. Unplug this apparatus during lightning storms or when unused for long periods of time.
17. Never unplug your radio by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet.
18. DON'T remove any fixed cover as this may expose dangerous voltages.
19. DON'T place hot objects or naked flame sources such as lighted candles or nightlight on, or close to equipment. High temperatures can melt plastic and lead to fires.
20. DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people.
21. DON'T continue to operate the equipment if you are in any doubt about if it's working normally or if it's damaged in any way. Switch it off, unplug the mains power and consult your dealer.
22. REPAIR OR REPLACE all electric service cords that have become frayed or otherwise damaged immediately. Do not use a cord that shows cracks or abrasion damage along its length, the plug, or the connector end.
23. DON'T place objects filled with liquids, such as vases on the apparatus.
24. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
25. The mains plug shall remain readily operable.
26. Ensure a minimum distance of 5cm around the apparatus for sufficient ventilation.
27. The ventilation should not be impeded by covering the ventilation opening with items such as newspapers, table-cloths, curtains, etc.
28. The batteries should be drawn to the environmental aspects of battery disposal.

Front panel - controls and functions

1. STANDBY: Power Standby Button.
2. SOURCE: Mode Selection Button.
3. LED Display.
4. VOL-: Volume Downward Adjustment Button.
5. VOL+: Volume Upward Adjustment Button.
6. Remote Sensor.

Rear panel - controls and functions

1. Optical Input.
2. Coaxial 1 Input.
3. TV Stereo Left Audio Input.
4. CD Stereo Left Audio Input.
5. Power On/Off Switch.
6. AC Power Cord.
7. Speaker Output.
8. Coaxial 2 Input.
9. TV Stereo Right Audio Input.
10. CD Stereo Right Audio Input.
11. Speaker Input.

System connection instructions

Note: When the DVD player is working and PCM mode is selected, the device operates; otherwise, the device cannot recognize the source.

Remote control

1. SOURCE: Input Mode Selection Button.

1. MUTE: Mute Function Button.
2. Bluetooth PLAY and PAUSE.
3. PREVIOUS track select on Bluetooth mode.
4. TREBLE+: Treble Upward Adjustment Button.
5. TREBLE-: Treble Downward Adjustment Button.
6. BASS+: Bass Upward Adjustment Button.
7. BASS-: Bass Downward Adjustment Button.
8. VOL-: Volume Downward Adjustment Button.
9. STANDBY: Power Standby.
10. NEXT track select on Bluetooth mode.
11. DSP: TV, Music, Movie sound effects mode Selection.
12. srs SRS Selection
13. VOL-: Volume Upward Adjustment Button.

Using the remote control

1. Insert the batteries

Insert two 1.5V size AAA batteries into the compartment of the remote control. Make sure the polarity of the battery complies with the markings on the compartment.

Notice:

Do not use old batteries together with new ones.

Do not throw the remote control on the ground or tread on it.

Please remove the batteries from the compartment when you do not use it for a long period of time.

2. Effective scope of the remote control

The remote control is effective within a range of less than 7 meters, and within an angle of 30 degrees from the remote control to the receiver in the center speaker.

Notice:

Do not place the remote control and the signal receiver under strong light.

Do not place any barrier between the remote control and the receiver.

Do not use this remote control at the same time as using any other one.

Operation

A. Switch On/Off the Product

1. Before turning on the system, please connect it according to the System Connection Instruction.
2. Connect AC power supply with this product. (Caution: Power source must be consistent with this product.)
3. Press the POWER switch button on the Rear Panel of the main unit to switch on the system, the standby indicator will light up. Then press the STANDBY button on the remote controller to enter the normal status. Press the button on the remote controller once again to keep power in standby status.
4. The device will get into standby mode automatically when there is no input signal detected within 30 minutes. Press "STANDBY" button on remote control to wake up.

B. VOLUME Selection

1. Press the VOL + button on the front of the main unit, or the VOL + button on the remote control to increase the volume.
2. Press the VOL - button on the front of the main unit, or the VOL - button on the remote control to decrease the volume.

C. TREBLE Selection

1. Press the TREBLE + button on the remote control to increase the treble level.
2. Press the TREBLE - button on the remote control to decrease the treble level.

D. BASS Selection

1. Press the BASS + button on the remote control to increase the bass level.
2. Press the BASS - button on the remote control to decrease the bass level.

E. MUTE Selection

1. Press the MUTE button on the remote controller once to keep the performance silent. Press "Mute" again to cancel mute function and the main volume instruction light will be flashing.

F. DSP Sound effects Selection

1. Press the DSP button on the remote control, TV, or MUSIC, or MOVIE sound effects the selection, the products will display 'E1', or 'E2', or 'E3'.

G. SRS Selection

1. Press the 'SRS' button on the remote control to switch between 'OFF' and 'ON'. The device has a built-in PCM decoder. When you choose PCM mode on your TV or DVD player, the device will decode the PCM source automatically.

TruSurround HD

Is a trademark of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc.

SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail, and clear dialog.

H. Bluetooth Selection

1. First, press the 'INPUT' button on the remote control. The product will display 'BLU', meaning it is in Bluetooth status. Then use any end user's audio device with Bluetooth to search. When the audio device shows 'LS 200e', enter and select it with password '0000'. The connection is successful when a boom sound is output.

Bluetooth™

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. We are the licensee to use such marks. Further information please visit www.bluetooth.org/apps/content/

Specifications

1. Power Supply: AC 230V/50Hz 2. Total Power Output: 150W 3. Subwoofer Power Output: 80W 4. Soundbar Power Output: 2 x 35W 5. Input Sensitivity (Subwoofer): 300mV±20mV 6. Input Sensitivity (Soundbar): 750mV±50mV 7. Speaker Impedance (Subwoofer): 8 Ohm 8. Speaker Impedance (Soundbar): 8 Ohm 9. S/N (A Weight): 80dB 10. THD (1kHz, 1W): 0.5% 11. Frequency Response (Subwoofer): 30Hz~150kHz ±3dB 12. Frequency Response (Soundbar): 200Hz~20kHz ±3dB 13. L/R Separation (1kHz): 30dB 14. L/R Balance (Stereo): ±2dB

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your retailer where you purchased the product.

© All rights reserved by Blaupunkt Competence Center Audio M3 Electronic GmbH. This material may be reproduced, copied, or distributed for personal use only.

BLAUPUNKT

Competence Center Audio

M3 Electronic GmbH

Gutenbergstrasse 5

D-65830 Kriftel - Germany

www.blaupunkt.com

Service Hotline Germany: Tel. [phone]

All rights reserved. All brand names are registered

trademarks of their respective owners. Specifications are

subject to change without prior notice.