WNP-UA1300P-01 - WiFi Repeater Gembird - Free user manual and instructions
Find the device manual for free WNP-UA1300P-01 Gembird in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | WiFi Repeater |
| Brand | Gembird |
| Model | WNP-UA1300P-01 |
| WiFi Standard | IEEE 802.11ac/n/g/b/a |
| Frequency Band | Dual-band 2.4GHz & 5GHz |
| Max Speed | Up to 1300Mbps (300Mbps on 2.4GHz + 867Mbps on 5GHz) |
| Ethernet Port | 1 x 10/100Mbps LAN |
| Antennas | 2 external antennas |
| Power Supply | DC 5V/1A |
| Dimensions (approx.) | 80 x 60 x 30 mm |
| Weight (approx.) | 100 g |
| LED Indicators | Power, WLAN, Ethernet |
| Security | WPA/WPA2 encryption |
| Setup Method | WPS button and web interface |
| Operating Temperature | 0°C to 40°C |
| Compatibility | Works with any standard WiFi router |
| Operation Mode | Repeater mode only |
| Wireless Coverage | Up to 300 m² (depending on environment) |
| Package Contents | Repeater, Ethernet cable, power adapter, manual |
| Certification | CE, RoHS |
Frequently Asked Questions - WNP-UA1300P-01 Gembird
How do I reset the Gembird WNP-UA1300P-01 to factory defaults?
Press and hold the WPS/Reset button on the device for about 10 seconds until the LEDs flash, then release. The repeater will reboot to factory settings.
How to configure the repeater via the web interface?
Connect to the repeater's WiFi (default SSID: Gembird_XXXX) or via Ethernet, open a browser, enter 192.168.10.1, and follow the setup wizard.
Does the WNP-UA1300P-01 support both 2.4GHz and 5GHz bands?
Yes, it is a dual-band repeater and can extend both frequencies simultaneously, providing up to 300Mbps on 2.4GHz and 867Mbps on 5GHz.
Can I use the Ethernet port to connect wired devices?
Yes, the Ethernet port can be used to connect a wired device like a PC, gaming console, or smart TV, turning the repeater into a wireless bridge.
What is the maximum coverage range of this repeater?
In ideal conditions, it can cover up to 300 square meters, but actual range depends on obstacles, interference, and router placement.
How do I use WPS to connect the repeater to my router?
Press the WPS button on your router, then within 2 minutes press the WPS button on the repeater. The LEDs will indicate a successful connection.
Is an app required for setup?
No, the repeater can be set up using the WPS button or via the web interface. There is no dedicated app required.
What should I do if the repeater is not connecting to my router?
Ensure the repeater is within range of the router, try resetting both devices, verify the router's WiFi band and security settings, and use WPS or manual setup.
Can I update the firmware of the WNP-UA1300P-01?
Yes, firmware updates are available on the Gembird support website. Download the file and apply it via the web interface under 'System Tools' > 'Firmware Upgrade'.
Is this repeater compatible with all routers?
It works with any standard WiFi router that supports 802.11b/g/n/ac. Compatibility with ISP-provided routers is generally good, but some custom settings may require manual configuration.
User questions about WNP-UA1300P-01 Gembird
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your WiFi Repeater in PDF format for free! Find your manual WNP-UA1300P-01 - Gembird and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WNP-UA1300P-01 by Gembird.