Heavy Duty JHD36A - Car stereo JENSEN - Free user manual and instructions
Find the device manual for free Heavy Duty JHD36A JENSEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Stereo (Heavy Duty) |
| Model | Jensen Heavy Duty JHD36A |
| Chassis Size | Single DIN (2" x 7") |
| Weight | 1.8 lbs (0.8 kg) |
| Power Supply | 12V DC (negative ground) |
| Max Power Output | 4 x 50 Watts |
| Radio Bands | AM/FM |
| Preset Stations | 30 (18 FM / 12 AM) |
| CD Playback | CD / CD-R / CD-RW |
| USB Input | Front USB (MP3/WMA) |
| Auxiliary Input | 3.5mm front AUX |
| Bluetooth | Built-in (hands-free calling & audio streaming) |
| Audio Features | Bass, Treble, Balance, Fader, EQ presets |
| Display | LCD with backlit (red/blue) |
| Clock | 12/24 hour with time setting |
| Weather Resistance | IPX5 splash proof (face only) |
| Security | Detachable face with carry case |
| Mounting | DIN mount with trim ring and screws |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Manual Included | Yes (free download in PDF) |
Frequently Asked Questions - Heavy Duty JHD36A JENSEN
How do I install the Jensen Heavy Duty JHD36A in my vehicle?
The unit uses a standard Single DIN installation. Secure the unit using the provided DIN sleeve and trim ring. Connect the wiring harness (ISO connector recommended). For detailed steps, refer to the installation section in the user manual.
What is the Bluetooth pairing procedure?
Turn on the unit and enable Bluetooth on your phone. Search for devices named 'JENSEN JHD36A' and select it. If prompted, enter PIN 0000. Pairing is complete when the display shows 'PAIRED'.
How do I reset the radio to factory settings?
Press and hold the RST button (usually behind the face) for 3 seconds, or use a paperclip to press the reset hole. This will clear all presets and settings.
Can I connect an external amplifier?
Yes, the unit has RCA preamp outputs (front/rear/sub) with 2.5V output. Connect the amplifier using standard RCA cables.
What audio file formats are supported via USB?
The USB port supports MP3 and WMA files. The unit can read up to 32GB USB drives formatted in FAT32.
How do I clean the detachable face?
Remove the face and wipe gently with a soft, dry cloth. Avoid using any chemicals or abrasive materials to prevent damage to the screen and connections.
Is the unit waterproof?
The front face is rated IPX5 splash-proof, meaning it can withstand water spray from any direction. It is not fully submersible. The main chassis should be mounted in a dry location.
What is the power output to speakers?
The unit delivers 4 x 50 Watts maximum power (RMS ~20W per channel). For higher power, use an external amplifier.
How do I set the clock?
Press and hold the DISP button until the hour flashes. Use the volume knob to adjust, press again to set minutes. Hold DISP again to save.
What should I do if the unit does not turn on?
Check the vehicle's fuse (usually 10A), ensure the wiring harness is properly connected, and verify that the ignition is on. If still no power, press the RST button to reset the unit.
User questions about Heavy Duty JHD36A JENSEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car stereo in PDF format for free! Find your manual Heavy Duty JHD36A - JENSEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Heavy Duty JHD36A by JENSEN.