Powertone BT - Loudspeaker Tracer - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Tracer
Model	Powertone BT
Dimensions	Approx. 20 x 10 x 10 cm (7.9 x 3.9 x 3.9 in)
Weight	Approx. 0.8 kg (1.76 lbs)
Power Source	Rechargeable lithium-ion battery; DC 5V USB charging
Battery Life	Up to 10 hours at moderate volume
Charging Time	Approx. 3-4 hours
Wireless Connectivity	Bluetooth 5.0
Wireless Range	Up to 10 meters (33 ft)
Audio Output	20W RMS (estimated)
Frequency Response	80 Hz - 20 kHz
Water Resistance	IPX5 (splash proof)
Controls	Power, Volume +/-, Play/Pause, Bluetooth pairing, LED indicator
Inputs	3.5mm AUX (line-in), USB (charging)
Compatibility	Smartphones, tablets, computers with Bluetooth or AUX
Hands-Free Function	Built-in microphone for speakerphone calls
Accessories Included	USB charging cable, 3.5mm audio cable, user manual
Maintenance	Wipe with a soft, dry cloth; avoid harsh chemicals
Safety Precautions	Do not disassemble, expose to extreme temperatures, or immerse in water
Repairability	Contact Tracer support for spare parts or repairs; do not attempt self-repair

Frequently Asked Questions - Powertone BT Tracer

How do I pair the Powertone BT with my phone?

Turn on the speaker and press the Bluetooth button to enter pairing mode (LED flashes). On your phone, enable Bluetooth and select 'Tracer Powertone BT' from the list.

How can I reset the speaker to factory settings?

With the speaker on, press and hold the Bluetooth button for about 5 seconds until you hear a tone or the LED flashes rapidly. This clears paired devices.

Why is the speaker not charging?

Check that the USB cable is firmly connected to both the speaker and a power source (5V/1A adapter recommended). Try a different cable or adapter. If still not charging, contact support.

What is the battery life and how do I know when to charge?

The battery lasts up to 10 hours at moderate volume. The LED indicator turns red when battery is low. Charge using the included USB cable.

Can I use the speaker while it is charging?

Yes, you can use the speaker while it is plugged into a power source. However, charging may take longer during use.

How do I connect via AUX cable?

Plug one end of the 3.5mm audio cable into the speaker's AUX input and the other into your device. The speaker will automatically switch to AUX mode.

Is the speaker waterproof?

The speaker has an IPX5 rating, meaning it is protected against splashes and light rain. Do not submerge it in water.

How do I adjust the volume?

Use the Volume + and - buttons on the speaker. You can also adjust volume from your connected device.

The sound is distorted at high volume. What can I do?

Lower the volume on your connected device and increase the volume on the speaker if needed. Distortion may occur at maximum output; try reducing to 80-90%.

How do I clean the speaker?

Wipe the exterior with a soft, dry cloth. Avoid using water, solvents, or abrasive cleaners. Keep the speaker clean from dust and debris.

USER MANUAL Powertone BT Tracer

Tracer Powertone BT Instructions for use

CZ

Tracer Powertone BT Návod k obsluze

SK

Tracer Powertone BT Návod na obsluhu

RU

Instructions for use

Warranty on batteries - 6 months

Warranty on the device - 24 months

Specification

BT Version: BT 3.0 ÷ EDR

Range: up to 10 m

Speaker output power: 6 W

Operating voltage: 3.7-4.2 V

Charging voltage: DC 5V

Frequency response: 50Hz-20KHz

Signal to noise (N) ratio: <7=85dB

MP3 support transmission of 32 KBPS to 320 KBPS

Playing time: 3-5 hours

Power supply: rechargeable lithium-ion battery

Button specification

Turn on/off: slide the key in the back of the casing to activate the spe-

aker

Play/pause: Short press to activate the music playback mode; long press to stop the music.

Answer/End: Press to answer incoming call. Long press to end the call. MODE switch: BT, TF, AUX, FM

Music. Short press - previous recording, Long press - lower volume. Music. Short press - next recording, Long press - higher volume

Operations

1. Turn ON/OFF

Turn ON: move the button into ON position to activate the speaker. Turn OFF: move the button into OFF position to deactivate the speaker.

Instructions for use

Tracer Powerlone BT

EN

2. MODE switch

BT mode is the primary mode: press to switch to playback mode from the local TF card, press the button to switch to an external source of music; press the button to switch to FM radio.

3. BT mode

A. BT connection: First turn on the BT mode (by pressing the blue LED will light up and turn into pairing mode. Find the name of the device on your mobile phone or other device to initiate connection. After successful pairing, blue LED lights up permanently. B. Playback via Bluetooth: During playback, the blue light flashes slowly. Press the button lonely to pause; Press the button closely to resume;

C. Connection via Bluetooth: Upon receipt of notification from the phone, press the button strictly to answer and then press directly, to end the call. Upon receipt of notification from the phone, press the button for a longer time to reject the call. (in addition to Bluetooth mode, you can switch to other modes using button)

4. TE Card mode

When you insert the TF card, it will be read automatically.

5. The AUX mode

After connecting the device to the audio output, use the button to activate the AUX mode.

6. USB mode

After connecting the device to the USB port, it will be read automatically.

Tracer

Powertone BT

Instructions for use

7. The FM mode

When you switch the mode by pressing the FM mode will be activated. To preset radio stations, connect the audio to the ANT as an antenna. Then press and hold (play / pause), and the stations will be programmed. You can change them by using the buttons.

8. Charging

Connect the micro USB cable to charge the device. During charging, the red light is turned on. The red light turns off after charging is complete.

Special Instructions

In the case of low battery, you will receive voice "low" notification. In the case of low battery, playback may be interrupted due to voltage drop. The user can reset the device by removing the battery. Then turn the device on again.

Troubleshooting

1. If the playback is too long, the device may turn off automatically. If the battery is dead, charge it.

2. Interference When Playing Music via Bluetooth Interference may occur if the distance between the speaker and the device is too large or in the event of connectivity issues.

3. Pairing Failed Verify that the device is in search mode, or reset the device. Too many Bluetooth devices in the vicinity may cause difficulties in the search. Turn off other Bluetooth devices.

Note:

The device shall be stored and used in room temperature. Do not expose the device to rain or moisture. Do not drop the device, avoid damage caused by a fall; Do not disassemble or repair the device by yourself; Do not dispose of the built-in battery into the trash or fire - it may pose explosion risk!

Návod k obsluze

Tracer Powertone BT

Power signal k sumu: <=85dB

Obsina MP-3, preios 32 KB Goba prabstuvania 3.5 hadi

Doba pénravénia, 0-0 hodm Nanévanie: Li-on brétés

Popis tlačidiel

The quick brown fox jumps over the lazy dog.