IMETEC M0601 - Heating

M0601 - Heating IMETEC - Free user manual and instructions

Find the device manual for free M0601 IMETEC in PDF.

📄 46 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice IMETEC M0601 - page 10
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Fan Heater
Brand Imetec
Model M0601
Heating Power 2000 W
Power Settings 2 (1000 W / 2000 W)
Thermostat Adjustable, with automatic temperature control
Oscillation Yes, 70° wide
Airflow Fan-forced, silent operation
Safety Features Overheat protection, tip-over switch, thermal fuse
Dimensions (L x W x H) 22 x 15 x 28 cm
Weight 2.0 kg
Power Supply 220-240 V, 50/60 Hz
Power Cord Length 1.5 m
Control Type Rotary knobs for power and thermostat
Indoor Use Only Yes
Cleaning Unplug and wipe with damp cloth; do not immerse
Filter Washable dust filter
Warranty 2 years
Spare Parts Availability Replacement filters and feet available

Frequently Asked Questions - M0601 IMETEC

How do I turn on the Imetec M0601 heater?
Plug the heater into a power outlet, then turn the power knob to the desired setting (I or II). Adjust the thermostat knob to your preferred temperature.
What do the power settings I and II mean?
Setting I provides 1000 W heating power, while setting II provides 2000 W. Use setting I for lower heat or energy saving, and setting II for faster heating.
How does the thermostat work?
The thermostat automatically maintains the room temperature. Turn the knob clockwise to increase the target temperature. The heater will cycle on and off to keep the room at the set level.
Can I use the heater in a bathroom?
No, the Imetec M0601 is designed for indoor use only and must be kept away from water. Do not use in bathrooms, near sinks, or in wet areas.
Why does the heater turn off by itself?
The heater has safety features: overheat protection and a tip-over switch. If it overheats or is knocked over, it will automatically shut off. Let it cool down and place it on a stable, flat surface.
How do I clean the filter?
Unplug the heater and remove the filter cover. Take out the filter and wash it under running water. Let it dry completely before reinstalling. Clean the filter every two weeks for optimal performance.
Can I leave the heater unattended overnight?
It is not recommended to leave the heater unattended for long periods. Always unplug when not in use, and never leave it running while sleeping.
What should I do if the heater makes a strange noise?
Turn off and unplug the unit. Check for any debris or loose parts. If the noise persists, contact Imetec customer service. Do not attempt to repair yourself.
Is the heater safe for use around pets?
Yes, but keep the heater away from bedding, curtains, and flammable materials. The exterior can become hot, so ensure pets cannot touch it.
Where can I find spare parts or the user manual?
Spare parts such as replacement filters can be ordered from Imetec's official website or authorized dealers. The user manual is available for free download on notice-facile.com.

User questions about M0601 IMETEC

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual M0601 - IMETEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M0601 by IMETEC.

USER MANUAL M0601 IMETEC

DATI TECNICI (5) / TECHNICAL DATA (5) / DATOS TÉCNICOS (5) / DADOS TÉCNICOS (5) / TECHNICKÉ ÚDAJE (5) / TECHNICKÉ ÚDAJE (5)

IMETEC TYPE M0601

220-240 V 50 Hz 2000 W

IMETEC M0601 - 1

INTRODUZIONE

Dear customer, thank you for choosing our product. We feel certain you will appreciate its quality and reliability as it was designed and manufactured with customer satisfaction in mind. These instructions for use comply with the European Standard EN 82079.

IMETEC M0601 - INTRODUZIONE - 1

WARNING! Instructions and warnings for a safe use.

Before using this appliance, carefully read the instructions for use and in particular the safety notes and warnings, which must be complied with. Keep this manual together with its illustrative guide for future consultation. Should you transfer the appliance to another user, make sure to hand over this documentation as well.

① NOTE: should any part of this manual be difficult to understand or any doubt arise, contact the company at the address indicated on the last page before using the product.
NOTE: partially sighted persons can consult the digital version of these instructions for use on the website www.tenactagroup.com

INDEX

Introduction......page 8 Use......page 11

Safety notes.... page 8 Maintenance and storage.... page 12

Symbols......page 11 Disposal......page 12

Description of the appliance Assistance and warranty ..... page 12

and its accessories . . . . . . . . page 11Illustrative guide . . . . . . . . . . . . . . . . . . .

Preparation......page 11 Technical data......II

SAFETY NOTES

- After unpacking, make sure the appliance is intact, complete with all its parts as shown in the illustrative guide and with no sign of damage due to transportation. In doubt, do not use the appliance

IMETEC M0601 - SAFETY NOTES - 1

WARNING! Risk of suffocation.

Children shall not play with the packaging. Keep the plastic bag out of reach of children.

  • This appliance must be used only for the purpose for which it was designed, namely as a fan heater for home use. Any other use is considered not compliant with the intended use and therefore dangerous.
  • Before connecting the appliance to the mains supply, make sure that the voltage and frequency indicated on the technical data of the appliance correspond to those of the mains supply. The rating is on the appliance or on the power supply unit, if any (see illustrative guide).
    • Children of less than 3 years should be kept away from the appliance unless continuously supervised.
  • Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the pliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

IMETEC M0601 - SAFETY NOTES - 2

CAUTION! Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  • DO NOT use the appliance with wet hands, damp feet or barefoot.
  • DO NOT pull the supply card on the appliance itself to remove the

IMETEC M0601 - SAFETY NOTES - 3

  • Always disconnect the appliance from the mains supply before cleaning or performing maintenance and when the appliance is not in use.
  • If the appliance is faulty or malfunctions, switch it off and do not tamper with it. Contact an authorised technical service centre for any repairs.
  • If the supply cord is damaged it must be replaced by an authorised technical service centre, so as to prevent all risks.
  • When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
  • For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA (ideal 10 mA) is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
  • This appliance shall not come into contact with water, other liquids, spray, steam. For any cleaning and maintenance operation refer to the instructions in the relevant chapter.
  • DO NOT use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
  • DO NOT use this appliance near a washbasin full of water. During use the appliance must be placed in such a way that it cannot fall in the washbasin.
  • This appliance must not be located immediately below a socketoutlet.
  • DO NOT leave this appliance in contact with or near materials and surfaces that are easily flammable or can get damaged with heat.
  • Use this heater on a horizontal and stable surface, or fix to the wall, as applicable.

IMETEC M0601 - SAFETY NOTES - 4

WARNING! In order to avoid overheating, do not cover the heater.

IMETEC M0601 - SAFETY NOTES - 5

WARNING! To reduce the risk of fire, keep textiles, curtains, or any other flammable material at a minimum distance of 1 m from the air outlet.

  • Use the appliance only with the supplied accessories that are an essential part of the appliance.
    • ⊗ DO NOT use extension cords or adaptors

EN

SYMBOLS
Warning Hot air with Eco fuel
Prohibited Rapid heating RAPID
Do not cover Anti-freeze *
OFFAppliance OFF Max temperature MAX
Cool air Notei

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES

Refer to Figure [A] in the Illustrative Guide to check the contents of the package.

  1. Rear air inlet grid

  2. Power switch

  3. Motor casing and air outled grid

  4. Technical data

  5. Room thermostat

PREPARATION

  • Unpack the product.
  • Check that it is intact and not damaged.
  • Connect the product to the domestic mains.

USE

IMETEC M0601 - USE - 1

WARNING! This appliance is not to be used if it has been dropped or if there are visible signs of damage.

- For fan operation, move the power switch (4) to the cool air position and adjust the ambient thermostat (3) to the maximum temperature.

Anti-freeze function

This function assures maintaining the room temperature at around +5^ . The fan heater turns on automatically as soon as the temperature falls below this value.

  • Adjust the room thermostat (3) to the minimum temperature.
  • Turn the power switch (4) to the Hot air with ECO mode position to gradually achieve a temperature of +5°C
    • Turn the power switch (4) to the Rapid heat position to quickly achieve a temperature of +5°C

MAINTENANCE AND STORAGE

IMETEC M0601 - MAINTENANCE AND STORAGE - 1

WARNING! Always disconnect the appliance from the mains supply before cleaning or performing maintenance.

The fan heater may be cleaned using a soft, slightly damp cloth. Dry well after cleaning.

IMETEC M0601 - MAINTENANCE AND STORAGE - 2

WARNING! Once you have finished using this appliance, make sure it has cooled down completely before putting it away.

Keep the fan heater in a cool, dry place, out of reach of children.

When you put the fan heater away, make sure it is well-protected from dust.

DISPOSAL

IMETEC M0601 - DISPOSAL - 1

The packaging of the appliance is made of recyclable materials. Dispose of it in accordance with the environmental protection regulations.

Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), the crossed bin symbol on the appliance or its packaging indicates that the appliance must be disposed of separately from other waste at the end of its useful life.

The user must therefore take the appliance to an appropriate recycling centre for electrical and electronic equipment. Alternatively, instead of handling the disposal, the user can hand over the appliance to the retailer when a new, equivalent one is purchased. The user can hand over electronic products measuring less than 25 cm to retailers of electronic products having a sales area of at least 400 m² free of charge and with no obligation to buy. Appropriate separate collection for the subsequent procedure for the decommissioned appliance for recycling, which includes treatment and environmentally friendly disposal helps prevent adverse effects on the environment and health and promotes reusing and/or recycling materials that the appliance consists of.

ASSISTANCE AND WARRANTY

The appliance is guaranteed for a period of two years from the date of delivery. Evidence shall be taken as the date indicated on the restrictions (provided it is possible), unless the buyer can prove

The warranty does not cover any part that may be defective due to:

a. Damage from transport or accidental drops,
b. Incorrect installation or inadequate electrical system,
c. Repairs or alterations made by unauthorised personnel,
d. Poor or incorrect maintenance and cleaning,
e. Product and/or product parts subject to wear and/or consumables,
f. Failure to comply with the appliance's operating instructions negligent or careless use,
g. an obstruction at the cold air inlet and hot air outlet (front and rear grid),
h. the product being covered while it is running
i. objects being inserted into the grids,
j. a twisted, bent or damaged power cord due to negligence.

The list above is purely indicative and not exhaustive and in any case, this warranty shall not cover all circumstances that cannot be attributed to manufacturing defects of the appliance.

In addition, the warranty does not cover any case of improper use of the appliance and professional

use.

All liability is disclaimed for any damage that may directly or indirectly be caused to persons, property

and pets as a result of failure to comply with all the instructions provided in the Instructions and

Warnings Booklet regarding appliance installation, use and maintenance.

This is without prejudice to any contractual warranty claims against the seller.

Methods of support

Appliance repairs must be carried out by an authorised Service Centre. If the faulty appliance is under warranty, it must be sent to the Service Centre together with a fiscal document that can confirm the date of sale or delivery.

EN

INFORMATION REQUIREMENTS FOR ELECTRIC LOCAL SPACE HEATERS

EN

Model identifier(s): Type M06C1
Item Symbol Value Unit Item Unit
Heat outputType of heat input, for electric storage local space heaters only (select one)
Nominal heat output P e_free 2.0 kWmanual heat charge control, with integrated thermostatno
Minimum heat output (indicative) P_free 2.0 kWmanual heat charge control with room and/or outdoor temperature feedbackno
Maximum continuous heat output P_free 2.0 kWelectronic heat charge control with room and/or outdoor temperature feedbackno
Auxiliary electricity consumption fan assisted heat output no
At nominal heat output e_free 2.0 kWType of heat output/room temperature control (select one)
At minimum heat output e_free 2.0 kWsingle stage heat output and no room temperature controlno
In standby mode el _3B n.a.kWTwo or more manual stages, no room temperature controlno
with mechanic thermostat room temperature controlyes
with electronic room temperature control no
electronic room temperature control plus day timerno
electronic room temperature control plus week timerno
Other control options (multiple selections possible)
room temperature control, with presence detectionno
room temperature control, with open window detectionno
with distance control optionno
with adaptive start controlno
with working time limitationno
with black bulb sensorno

INTRODUCCIÓN

ASSISTÊNCIA E GARANTIA

POPIS PŘÍSTROJE A PŘÍSLUŠENSTVÍ

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : IMETEC

Model : M0601

Category : Heating