IPC-T120-D - Security Camera HiLook - Free user manual and instructions

Product Type	Security Camera
Model	IPC-T120-D
Brand	HiLook
Image Sensor	1/2.7" Progressive Scan CMOS
Resolution	2 MP (1920 x 1080)
Lens	2.8 mm fixed
Day/Night	IR cut filter with auto-switch
Infrared Range	Up to 30 m
Minimum Illumination	0.01 Lux @F1.2, 0 Lux with IR
Video Compression	H.265+/H.265/H.264+/H.264
Frame Rate	25/30 fps @1080p
Network Interface	1 x RJ45 10/100M self-adaptive
Power Supply	12 V DC ± 25%, PoE (802.3af)
Power Consumption	≤ 5.5 W
Dimensions	Φ 70 mm × 146 mm
Weight	Approx. 300 g
Housing Material	Metal and plastic
Weatherproof Rating	IP67
Operating Temperature	-30 °C to 60 °C
Storage Temperature	-30 °C to 60 °C
Humidity	≤ 95% non-condensing
Mounting	Ceiling/wall mount bracket included
Main Functions	Motion detection, tampering alarm, infrared night vision, 3D DNR, BLC, HLC
Care and Cleaning	Clean lens with soft dry cloth; avoid direct sunlight; check cable connections periodically
Safety	Use provided power adapter; install securely to prevent fall; keep away from heat sources
Spare Parts and Repairability	No user-serviceable parts; contact dealer for repairs
General Information	Supports ONVIF (Profile S), Hik-Connect cloud service, web browser access

Frequently Asked Questions - IPC-T120-D HiLook

How do I reset the camera to factory defaults?

Press and hold the reset button on the camera for 10 seconds or use the web interface under Maintenance > Factory Defaults.

What is the default IP address?

The default IP is 192.168.1.64. Use the HiLook Config Tool or SADP software to find it on your network.

How do I connect the camera to Wi-Fi?

This camera is wired (Ethernet/PoE). For wireless, you need a separate Wi-Fi adapter or a different model.

Can I view the camera remotely?

Yes, via Hik-Connect app or web browser after port forwarding. Enable Dynamic DNS for a fixed address.

How do I update the firmware?

Download the latest firmware from the HiLook website, then upload it via the camera's web interface under Maintenance > Firmware Upgrade.

What microSD card size does it support?

It supports microSD cards up to 256 GB (Class 10). Format the card to FAT32 before use.

Why is the infrared not working?

Check if the IR cut filter is set to Auto in camera settings. Ensure no strong light near the sensor. Clean the IR LEDs.

How do I enable motion detection recording?

In the web interface, go to Storage > Schedule Settings and select Motion as the recording trigger.

What is the warranty period?

HiLook typically offers a 2-year limited warranty. Check with your dealer for specific terms.

Can I use this camera without a DVR/NVR?

Yes, it can record directly to a microSD card or via FTP/Cloud. However, a recorder is recommended for continuous recording.

USER MANUAL IPC-T120-D HiLook

Any and all information, including, among others, wordings, pictures, scripts are the proper of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereiner referred to be "Hikvision"). This user manual (hereiner referred to be "the Manual") cannot be reproduced, changed, translated, or distributed, partly or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise spulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.

About this Manual This Manual is applicable to T1XX Network Turret Camera. The Manual includes instructors for using and managing the product. Pictures, charts, images and all other information hereinaer are for descripon and explanation only. The information contained in the Manual is subject to change, without notice, due to mware updates or other reasons. Please find the latest version in the company website (http://www.solidon.com/en/).

Please use this user manual under the guidance of professionals. Trademarks Acknowledgement

Hileek and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.

Network Turret Camera : Quick Start Guide

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND

FIRMWARE, IS PROVIDED "AS IS", WITH ALL FAULTS AND ERRORS,

AND HII/VISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL

HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE

LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR

LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF

DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF

THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF

PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL

NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,

PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYDER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET

SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL

RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS

PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE

APPLICABLE LAW. HIKVISION SHALL NOT DE LIADLE IN THE EVENT

THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

Network Turret Camera : Quick Start Guide

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Informaon

FCC Informaon

Please take a non that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the introncous, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment as and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Roarient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit element from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help

FCC Conditions

Network Turret Camera · Quick Start Guide

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

EU Conformity Statement

CE This product and - It applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EVC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE drovec): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at designated collecon points. For more information see: www.recyclethis.info

2006/56/EC (baery directive): This product contains a baery that cannot be disposed of as unsorted municipal waste in the European Union. See the product document for specific baery information. The baery is marked with this symbol,

which may include leering to indicate cadmium (Cd), lead (Pb), mercury (Hg). For proper recycling, return the beery to your supplier or to a designated collecon point. For more information see: www.recyclethis.info

Network Turret Camera : Quick Start Guide

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 [G]/NMO-3[G] standards requirements.

Safety Instrucon

These instructors are intended to ensure that user can use the product correctly to avoid danger or property loss.

The precaution measure is divided into "Warnings" and "Cations"

Warnings: Serious injury or death may occur if any of the warnings are neglected.

Cauons: Injury or equipment damage may occur if any of the cauons are neglected.

Warnings follow these safeguards to prevent serious injury or death.	Cauons follow these precautions to prevent potential injury or material damage.

Warnings

- Proper congruration of all passwords and other security songs is the responsibility of the installer and/or end user.

Network Turret Camera · Quick Start Guide

• In the use of the product, you must be in strict compliance with the electrical safety regulations of the naon and region. Please refer to technical specifications for detailed information.
• Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information.
• Do not connect several devices to one power adapter as
• Please make sure that the plug is rmly connected to the power socket. When the product is mounted on wall or ceiling, the device shall be rmly sad.
• If smoke, odor or noise rise from the device, turn a the power at once and unplug the power cable, and then please contact the service center.

Cauons

• Make sure the power supply voltage is correct before using the camera.
• Do not drop the camera or subject it to physical shock.
• Do not touch sensor modules with ngers. If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period please replace the lens cap to protect the sensor from dirt.
• Do not aim the camera at the sun or extra bright places. Blooming or smoaring may occur otherwise (which is not a

Network Turret Camera · Quick Start Guide

malfuncon), and sect the endurance of sensor at the same me.

• The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam.
• Do not place the camera in extremely hot, cold (the operating temperature shall be -10°C to 40°C), dusty or damp locaons, and do not expose it to high electromagnes radion.
• To avoid heat accumulation, good veniaon is required for operating environment.
• Keep the camera away from liquid while in use.
• While in delivery, the camera shall be packed in its original packing, or packing of the same texture.
• Regular port replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly according to their average enduring me. The average me varies because of differences between operating environment and using history, so regular checking is recommended for all the users. Please contact with your dealer for more details.
• Improper use or replacement of the baery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used baeries according to the instrucons provided by the baery manufacturer.
• If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. [We shall not assume any

Network Turret Camera · Quick Start Guide

responsibility for problems caused by unauthorized repair or maintenance.)

0504061071124

Network Turret Camera : Quick Start Guide

Table of Contents

1 Appearance Descripan 10

2 installaon 13

2.1 Ceiling Mounting....13

2.2 Mourng with Jurcon Box....17

2.3 Mounding with Inclined Base....19

3 Set the Network Camera over the LAN 23

3.1 Wiring 2

3.2 Avote the Camera 24

3.2.1 Acvson via Web Browser 24

3.2.2 Acveon via SADP Soware 26

3.3 Modify the IP Address 27

4 Access via Web Browser 30

5 Operate via Hilk-Connect App 32

5.1 Enable Hik-Connect Service on Camera....3

5.1.1 Enable Hik-Connect Service via SADP Soware .. 32

5.1.2 Enable Hik-Connect Service via Web Browser .... 3

5.2 Hik-Connect Setup 35

5.3 Add Camera to Hik-Connect.... 35

5.4 Initialize the Memory Card 37

Network Turret Camera · Quick Start Guide

1 Appearance Descripon

This series of cameras have four appearances shown as the guras below.

Figure 1-1 Type I Turnet Camera Overview

Figure 1.2 Type II Turret Camera (PoE) Overview

Network Turret Camera : Quick Start Guide

Figure 1-3 Type III/IV Turret Camera Overview

Note:

Type III and type IV cameras share the same appearance, with the difference in dimension.

Type Description Table 1-1

No.	Descripen
1	Enclosure
2	Camera Body
3	Mounting Base
4	Power Cord
5	Network Cable

Network Turret Camera : Quick Start Guide

Note:

For cameras support power over Ethernet (PoE), the power is passed along with data on Ethernet cabling. And a switch supports PoE function is required.

Network Turret Camera : Quick Start Guide

2 Installaon

Before you start:

• Make sure the device in the package is in good condition and all the assembly parts are included.
• The standard power supply is 12 VDC, make sure your power
• Make sure all the related equipment is power-o during the installaoon.
• Check the specification of the products for the installation environment.
• Make sure that the wall is strong enough to withstand four mcs the weight of the camera and the bracket.
• Make sure that there is no receive surface too close to the camera lens. The IR light from the camera may react back into the lens causing reocon.

Note:

Four types of the camera share the same installation method, we take type III/IV turret camera as the example to illustrate the installation.

Ceiling Mounng 2.1

Before you start:

Both wall mouning and ceiling mouning are suitable for the turret camera. Ceiling mouning will be taken as an example in this second.

Network Turret Camera · Quick Start Guide

And you can take steps of ceiling mouting as a reference for wall mouting.

Steps:

1. Paste the drill template (supplied) to the desired moung
   poslon on the ceiling.
2. Drill the screw holes and the cable hole in the ceiling according to
   the drill template.

Note:

Drill the cable hole, when adopting ceiling outlet to route the cable.

Figure 2-1 The Drill Template

1. Disassemble the camera.

1). Rotate the camera to align the notch to one of the marks.
2). Pry the mourng base to remove the mourng base with the camera body with a at object, e.g., a coin.

Network Turret Camera · Quick Start Guide

Figure 2.2 Disassemble the Camera

1. Fix the mounting base to the ceiling with supplied screws.

Notes:

• In the supplied screw package, both self-tapping screws, and
• If the ceiling is cement, expansion bolts are required to x the cement. If the ceiling is wooden, self-tapping screws are required.

Figure 2-3 Fix the Mounting Base

1. Route the cables through the cable hole or the side opening.
2. Install the camera body back to the mounting base.

Network Turret Camera : Quick Start Guide

Figure 2-4 Install the Camera Body

1. Connect the power cord and network cable.
2. Power on the camera, and set the network congraton for details, refer to 3 Set the Network Camera over the LAN and 4 Access via Web Browser; to check whether the image is good from the opium angle. If not, adjust the surveillance angle.

Figure 2-5 Adjust Surveillance Angle

1) Hold the camera body and rotate the enclosure to adjust the pan angle [0^ to 360^] .

Network Turret Camera : Quick Start Guide

2]. Move the camera body up and down to adjust the It angle [0° to 75°].
3]. Rotate the camera body to adjust the rotaon angle [0° to 360°].

2.2 Mounng with Juncon Box

Before you start:

• You need to purchase a juncon box separately if you adopt the mouning with a juncon box.
• Both wall moung and ceiling moung are suitable for the turret camera. Wall moung will be taken as an example in this section. And you can take steps of wall moung as a reference for the ceiling moung.

Steps:

1. Paste the drill template (supplied) to the desired mouting posion on the wall.
2. Drill the screw holes and the cable hole in the wall according to the drill template.

Figure 2-6 Drill Template

Network Turret Camera · Quick Start Guide

1. Take apart the junction box, and x the camera's mounting base with three MP4 screws on the junction box's cover.

Figure 2-7 Fix screws on the junction box's Cover

1. Secure the juncon box's body on the wall with four P44 x 25 screws.

Figure 2-8 Secure the Juncon Box's Body on the Ceiling/Wall

Network Turret Camera : Quick Start Guide

1. Combine the juncon box's cover with its body with supplied screws.
2. Repeat steps 5 to 8 of 2.1 Ceiling Mounting to complete the installation.

2.3 Mounng with Inclined Base

Before you start:

• You need to purchase an inclined base separately if you adopt the mouting with an inclined base.
• Both wall moung and ceiling moung are suitable for the turret camera. Wall moung will be taken as an example in this section. And you can take steps of wall moung as a reference for the ceiling moung.

Steps:

1. Paste the drill template to the wall.
2. Drill screw holes and the cable hole (oponal) on the wall according to the supplied drill template.

Note:

Drill the cable hole, when adopting ceiling outlet to route the cable

Network Turret Camera : Quick Start Guide

Figure 2-9 Drill Template

1. Disassemble the inclined base by the screw driver.
2. Install the turret camera's mounting base on the inclined base cover with three PMI screws.

Figure 2-10 Fix Camera's Mourng Base

1. Install the inclined base's body on the ceiling/wall with four P44×25 screws.

Figure 2-11 Fix the Inclined Base's boy on Ceiling/Wall

1. Combine inclined base's cover with its body with supplied screws.

Network Turret Camera : Quick Start Guide

1. Repeat steps 5 to 8 of 2.1 Ceiling Mowning to complete the installation.

2.4 Wall Mounng

Note:

You need to purchase a wall mounting bracket separately.

Steps:

1. Drill four screw holes in the wall according to the holes of the
   bracket.
2. Install the bracket to the wall by aligning the four screw holes of
   the bracket with expansion screws on the wall.
3. Secure the bracket with four hex nuts and washers.

Figure 2-12 Install the Wall Mounting Bracket

1. Install the mounting base of the turret camera to the wall mounting bracket and secure them with supplied screws.

Network Turret Camera · Quick Start Guide

Figure 2-13 Install the Mouning Base on the Wall Mouning Bracket

1. Repeat steps 5 to 8 of 2.1 Ceiling Moundo to complete the

instalcon.

Network Turret Camera : Quick Start Guide

3 Set the Network Camera over the LAN

Note:

You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any networkacks and information leakage, please strengthen your own protocol.

If the product does not work properly, contact your dealer or the nearest service center for help.

3.1 Wiring

Connect the camera to network according to the following gures.

graph LR
    A["Network Camera"] --> B["Network Cable"]
    B --> C["Computer"]
    D["Network Camera"] --> E["Network Cable"]
    E --> F["Router"]
    G["Computer"] --> H["Switch via Switch or a Router"]

Network Turret Camera : Quick Start Guide

3.2 Acvate the Camera

You are required to octave the camera rst by seng a strong

password for it before you can use the camera.

Acvaon via web browser, acvaon via SADP, and acvaon via

clientaware are all supported. We will take avson via SADP

sware and avson via web browser as examples to introduce

the camera acvaan.

Note:

Refer to the User Manual of Network Camera for Acvaon Via

Client Soware.

Acvaon via Web Browser 3.2.1

Steps:

1. Power on the camera. Connect the camera to your computer or the switch/router which your computer connects to.

2. Input the IP address into the address bar of the web browser, and press Enter to enter the advaon Interface.

Notes:

• The default IP address of the camera is 192.168.1.64.

- The computer and the camera should belong to the same subnet.

- For the camera enables the DHCP by default, you need to use the SADP sware to search the IP address.

Network Turret Camera - Quick Start Guide

Aveon Interface (Web) Figure 3-3

1. Create a password and input the password into the password

STRONG PASSWORD RECOMMENDED- We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case leers, lower case leers, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resiring the password monthly or weekly can hear protect your product.

1. Commit the password.

Network Turret Camera : Quick Start Guide

1. Click OK to save the password and enter the live view interface.

Acvaon via SADP 5oware 3.2.2

SADP software is used for detecting the online device, avang the camera, and reteng the password.

Get the SADP aware from the supplied disk or the octal website, and install the SADP according to the prompts.

Follow the steps to octave the camera.

Steps.

1. Run the SADP soware to search the online devices.

2. Check the device status from the device list, and select the

inactive device.

SADP Interface Figure 3-4

Note:

The SADP soware supports acvarg the camera in batch. Refer to the user manual of SADP soware for details.

Network Turret Camera : Quick Start Guide

1. Create and input the new password in the password eid, and confirm the password.

STRONG PASSWORD RECOMMENDED—We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case leers, lower case leers, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, reseng the password monthly or weekly can be protected your product.

Note:

You can enable the Hik-Connect service for the device during advaon. Refer to Chapter 5.1 for detailed informaon.

1. Click Acvate to start acvapo.

You can check whether the acvaon is completed on the popup window. If acvaon failed, make sure that the password meets the requirement and try again.

3.3 Modify the IP Address

Purpose:

To view and congregate the camera via LAN (Local Area Network), you need to connect the network camera in the same subnet with your PC.

Use the SADP soware or client soware to search and change the IP address of the device. We take modifying the IP Address via SADP soware as an example to introduce the IP address modification.

Network Turret Camera : Quick Start Guide

For IP address modicoan via client sware, refer to the user manual of client sware.

Steps:

1. Run the 5ADP soware.
2. Select an active device.
3. Change the device IP address to the same subnet with your computer by other modifying the IP address manually or checking the checkbox of Enable DHCP.

Modify the IP Address Figure 3-5

Network Turret Camera - Quick Start Guide

Note:

You can enable the Hik-Connect service for the device during action. Refer to Chapter 5.1 for detailed information.

1. Input the admin password and click Modify to octave your IP address modification.

The batch IP address modification is supported by the SADP. Refer to the user manual of SADP for details.

Network Turret Camera : Quick Start Guide

4 Access via Web Browser

System Requirement:

Operating System: Microso Windows XP SP1 and above version

CPU: 2.0 GHz or higher

RAM: 1G or higher

Display: 1024×768 resolution or higher

Web Browser: Internet Explorer 8.0 and above version, Apple Safari

5.0.2 and above version, Mozilla Firefox 5.0 and above version and

Google Chrome 18 and above version

Steps:

1. Open the web browser.

2. In the browser address bar, input the IP address of the network camera, and press the Enter key to enter the login interface.

Note:

The default IP address is 192.168.1.64. You are recommended to change the IP address to the same subnet with your computer.

1. Input the user name and password.

The admin user should congregate the device accounts and user/operator permissions properly. Delete the unnecessary accounts and user/operator permissions.

Note:

The device IP address gets locked if the admin user performs 7 failed password attempts (5 attempts for the user/operator).

Network Turret Camera : Quick Start Guide

1. Click Login

Login Interface Figure 4-1

1. Install the plug in before viewing the live video and managing the camera. Follow the installation prompts to install the plug-in.

Note:

You may have to close the web browser to nish the installacn of the plug-in.

Download Plug-in Figure 4-2

1. Reopen the web browser aer the installaon of the plug-in and repeat steps 2 to 4 to login.

Note:

For detailed instructions of further congruration, please refer to the user manual of network camera.

Network Turret Camera : Quick Start Guide

5 Operate via Hik-Connect App

Purpose:

Hik-Connect is an application for mobile devices. With the App, you can view live image of the camera, receive alarm nocaon and so

on.

Note:

Hik-Connect service is not supported by certain camera models.

5.1 Enable Hik-Connect Service on Camera

Purpose:

Hik-Connect service should be enabled on your camera before using the service.

You can enable the service through SADP sowie or web browser.

Enable Hik-Connect Service via SADP Soware 5.1.1

Steps

1. Check the checkbox of Enable Hik-Connect on:

1). "Advate the Device" page during camera action, refer to Chapter 3.2.2.

2). Or "Modify Network Parameters" page during modifying IP address, refer to Chapter 3.3.

1. Create a vericaon code or change the vericaon code.

Network Turret Camera : Quick Start Guide

Vericaon Code Seng (SADP) Figure 5-1

Note:

The vericaon code is required when you add the camera to Hik Connect app.

1. Click and read 'Terms of Service' and 'Privacy Policy'.

2. Comm the songs.

Enable Hik-Connect Service via Web Browser 5.1.2

Before you start:

You need to rotate the camera before enabling the service. Refer to Chapter 3.2.

Network Turret Camera : Quick Start Guide

Steps:

1. Access the camera via web browser. Refer to Chapter 4.

2. Enter plaorm access congruraon interface: Conguraon > Network > Advanced Sengs > Plaorm Access.

Placrm Access Conguraon [Web] Figure 5-2

1. Select Plaorm Access Mode as Hik-Connect.
2. Check the checkbox of Enable
3. Click and read "Terms of Service" and "Privacy Policy" in pop-up window.
4. Create a vericaon code or change the vericaon code for the camera.

Note:

The vericaon code is required when you add the camera to Hik-Connect app.

Network Turret Camera : Quick Start Guide

1. Save the songs.

5.2 Hik-Connect Setup

Steps.

1. Download and install the Hik-Connect app by searching "Hik Connect" in App Store or Google Play™.
2. Launch the app and register for a Hik-Connect user account.
3. Log in Hik-Connect app ser registraion.

5.3 Add Camera to Hik-Connect

Before you start:

You need to enable the Hik-Connect service on camera before adding it to your Hik-Connect account. Refer to Chapter 5.1.

Steps:

1. Use a network cable to connect the camera with a router if the camera does not support Wi-Fi.

Figure 5-3 Connect a Router

Note:

Aer the camera connects to the network, please wait one minute

before any operation on the camera using Hik-Connect app.

Network Turret Camera : Quick Start Guide

1. In the Hik-Connect app, tap "4" on the upper-right corner and then scan the QR code of the camera to add the camera.

You can find the QR code on the camera or on the cover of the Quick Start Guide of the camera in the package.

Figure 5-4 Scan QR Code

Note:

If the QR code is missing or too blur to be recognized, you can also add the camera by tapping the neon and impung the camera's serial number.

. Input the verification code of your camera.

Note:

- The required verification code is the code you create or change when you enabling Hit Connect service on camera.

- If you forget the vericaon code, you can check the current vericaon code on Plaorm Access configuration page via web browser.

1. Follow the prompts to set the network connection and add the camera to your Hik-Connect account.

Note:

For detailed information, refer to the user manual of the Hik-Connect app.

Network Turret Camera : Quick Start Guide

5.4 Inialize the Memory Card

Check the memory card status by tapping on the Storage Status in

the Device Sengs interface

If the memory card status displays as Uninitialized, tap to initialize

It. The status will then change to Normal. You can then start

recarding any event triggered video in the camera such as indox

UD050288-A

www.hikvision.com