HDC501 - Security Camera Clover Electronics - Free user manual and instructions

Product Type	HDC501 Day & Night Color Security Camera
Image Sensor	1/3" Sony Super HAD CCD
Effective Pixels	768H x 494V (NTSC), 811H x 508V (PAL)
Horizontal Resolution	560 TV Lines
Minimum Illumination	0.01 Lux @F1.2
Lens	DC Auto Iris Vari-focal Lens (5-50mm)
Infrared LEDs	15 IR LEDs with CDS sensor, up to 240 ft range (depends on scene reflection)
Weatherproof Rating	IP67
Construction	Rugged Steel
Video Output	Composite 1.0Vp-p @75 Ω
Power Supply	DC15V, 1.5A (UL Approved AC adapter included)
Current Consumption	1A Max @DC15V
Operating Temperature	-10°C to 50°C
Dimensions (W x H x D)	100 mm x 134 mm x 290 mm
Weight	2 kg
Cable Length	100 ft (30.5 m) cable included; total cable must not exceed 200 ft
Mounting	Wall or ceiling mount with universal bracket and locking ring
Warranty	Limited 2-year warranty on parts and labor
Maintenance	Clean lens with soft, clean cloth; avoid fingerprints on window
Safety Precautions	Do not open case; use only supplied AC adapter; keep away from magnetic fields and direct sunlight
Available Accessories	CDR4010, CDR4170, CDR1610 DVRs

Frequently Asked Questions - HDC501 Clover Electronics

How do I adjust the angle of view on the HDC501 camera?

Remove the sun-visor (2) and turn rings (3) and (4) counter-clockwise to loosen. Then adjust the zoom ring (T↔W) to set focal length (5-50mm) and the focus ring (N) to sharpen the image. After adjustment, securely tighten all rings to prevent water leakage.

What is the maximum IR range of the HDC501?

The camera has 15 infrared LEDs with a CDS sensor, providing an IR range of up to 240 feet depending on scene reflectivity.

Can the HDC501 be used outdoors?

Yes, the camera is weatherproof with an IP67 rating, making it suitable for outdoor use in rain or dust.

How do I connect the camera to a monitor or DVR?

Connect the 100 ft cable to the camera’s DIN jack (align arrows), then attach the BNC or RCA end to the video input of your DVR, monitor, or TV. Plug the AC adapter into the DC jack (red) of the cable.

What power supply does the HDC501 require?

The camera requires a DC 15V, 1.5A power supply. Only use the provided UL-approved AC adapter to avoid damage.

Why is there no video output from the camera?

Check the AC adapter connection and ensure the video cable between the camera and monitor is secure. Also verify the monitor is set to the correct input.

How do I clean the camera lens?

If the lens is dirty, gently wipe it with a soft, clean cloth. Avoid using harsh chemicals and do not leave fingerprints on the window as it may degrade image quality.

What is the resolution of the HDC501 camera?

The camera delivers high resolution of 560 TV lines using a 1/3" Sony Super HAD CCD sensor.

How do I mount the camera on a wall or ceiling?

Attach the base ring to a wall stud or ceiling joist with screws. Then attach the mounting bracket to the base ring and secure with the locking ring. Adjust the angle using the pivot locking screw with the provided hex wrench.

What does the limited warranty cover?

Clover Electronics offers a 2-year limited warranty covering defects in material or workmanship. The warranty does not cover modification, abuse, or incidental damages. Return shipping is covered with a $25 fee.

USER MANUAL HDC501 Clover Electronics

• To avoid electrical shock, do not open the case of this product.
- Operate this product using only the supplied AC Power supply.
- Do not overload electrical outlets or extension cords; this can result in fire or electric shock.
- Keep this product away from strong magnetic fields.
- Do not expose this product in direct sunlight or strong reflected rays.
• Refer servicing to qualified personnel only.
- Do not change or modify this product, the warranty will be voided.

FEATURES

• Weatherproof (IP67)
  • 1/3" Sony Super HAD CCD
  • High Resolution 560 TV Lines
  • Rugged Steel Construction
  • Total 15 Infrared LEDs with a CDS sensor
• Up to 240' IR range (depends on scene reflection)
  • DC Auto Iris Vari-focal Lens (5-50mm)
• Attached Universal Mounting Bracket and 100' cable
  • DC12V Power Source

INSTALLATION

1. Attach the mounting bracket base ring① to the wall or ceiling, wherever you want to install the camera. Locate a wall stud or ceiling joist and secure the bracket base ring using the supplied screws. Attach the mounting bracket② to the base ring① and secure them using the supplied screws.
2. Lock the mounting bracket with the locking ring③.
3. Turn the pivot locking screw ^④ with the provided hex-head wrench counterclockwise to set the desired angle of camera toward objects and turn it clockwise to secure. It can be used for wall-mount or ceiling-mount application depending on setting this pivot locking screw.
4. Loosen the locking screw ^⑤ with the provided hex-head wrench and turn the camera clockwise or counter-clockwise to upright images on the screen and turn it clockwise to secure.
5. Connect the one end of 100' cable (supplied) to the Din jack of 5' cable attached to the camera. Make sure that two arrows on the top of them should be aimed at each other. Connect the other end (BNC or RCA) of cable to the video devices such as

DVR, monitor/TV. Plug the provided AC adapter to the DC jack (red) of the end of 100' cable.

CEILING-MOUNT

WALL-MOUNT

HOW TO ADJUST ANGLE OF VIEW

1. Vari-focal lens①

Easily changeable angle of view: 5 to 50mm

1. Remove the sun-visor② and turn the ring③ and ④ counter-clockwise to make easier adjustment for angle of view (Do not open it).

Do not stamp your fingerprint on the window, which may affect picture quality.

1. T↔W (Tele ↔ Wide)⑥

Turn this adjustment ring⑥ clockwise or counter-clockwise to set the focal length.

1. N⑤

Turn this adjustment ring⑤ clockwise or counter-clockwise to set the focus.

1. After setting the focus and focal length, the adjustment ring⑤ and ⑥ should be securely fastened so that water can not leak into the camera.

Note:

• Apply the provided AC adapter only.
• The total length of cable must not exceed 200' including extension cable.

TROUBLE SHOOTING

If the camera does not function properly, check the following points before contacting the service center.

Troubles	Remedies
No video Check the AC adapter and video	cablebetween the camera and a monitor
The image on the screen is dark Check the	brightness control on the monitor
The image on the screen is dim Check if the lens is stained. If dirty, clean it with soft and clean cloth
The camera is not working properly, and the surface of the camera case is hot	Check if you have connected the provided AC adapter
The contrast on the screen is too weak Adjust the contrast feature of the monitor. If the camera is exposed under too strong light, change the position
The image on the screen flickers Does the camera face to directly to the sunlight or fluorescent light? Change the camera position
Picture rolls and jumps, scrambled picture	Improper V-hold control. Setting on your monitor
Picture smaller than screen House current	may be too low

SPECIFICATIONS

• Image sensor 1/3" Sony Super HAD CCD, 811H x 508V
  • Effective pixels
• Scanning system
  • Horizontal resolution 560 TV lines
• Shutter speed Auto, Manual (1/60 to 1/120,000 sec)
• Sync. System
• S/N ratio
  525 lines, 2:1 interlace
  [Non-Text]
  。
  。
  。
  。
  。

768H x 494V

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

|

|

|

|

|

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

• Minimum illumination 0.01 Lux @F1.2
• Video output Composite 1.0Vp-p @75 Ω
- AGC Auto
• Digital Noise Reduction Auto
- White balance Auto
- Lens DC Auto Iris Vari-focal Lens 5mm to 50mm
- Current consumption 1 Am Max @DC15V
- Power supply DC 15V, 1.5A
- Operating temperature -10°C to 50°C
- Dimensions 100(W)x 134(H) x 290(D) mm
- Weight 2Kg

LIMITED 2 YEAR WARRANTY

This warranty gives the original purchaser specific legal rights and you may also have other rights, which vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair free of charges for 2 years on parts and labor from the date of original purchase. This warranty does not cover modification, abuse, incidental or consequential damages unless the state of owner's residence specially prohibits limitations on incidental or consequential damages.

HOW TO OBTAIN FACTORY SERVICE

1. Original purchaser must fill out a warranty card and mail it to the factory with model number, serial number and the date of purchase.
2. We will repair or replace, and return to the owner the system under this limited warranty.
3. Please pack the system carefully and securely using the original packing materials, and send it prepaid and insured to: 13073 E. 166 ^th St, Cerritos, CA 90703.
4. Please include a check for \$25.00 to cover the cost of return postage and handling. If the system is returned within the warranty period, please include a proof of purchase. If the system is out of warranty, you will receive an estimate of the repair cost for your approval before repair work will be begun.

AVAILABLE ACCESSORIES

CDR4010	Stand-alone 4 CH Digital Video Recorder (DVR).
CDR4170	Stand-alone 4 CH Digital Video Recorder (DVR).
CDR1610	Stand-alone 16 CH Digital Video Recorder (DVR).

PACKAGE INCLUDES

1-Day & Night Color Camera
1-100' 6pin Din Cable
1-UL Approved AC Adapter
1-BNC to RCA Adapter
1-Hardware Accessories Kit
1-Instruction Manual
1-Warranty Registration Card