TSA1535 - Uncategorized Teesa - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Model	TSA1535
Brand	Teesa
Dimensions (Approx.)	18 x 6 x 6 cm
Weight	350 g
Power Source	Built-in rechargeable battery (3.7V, 1500mAh)
Charging	Micro USB, 5V/1A
Battery Life	Up to 10 hours at 50% volume
Connectivity	Bluetooth 5.0, AUX input
Wireless Range	Up to 10 meters
Output Power	10W (RMS)
Frequency Response	80Hz - 20kHz
Speaker Drivers	1 x 52mm full range
Controls	Power, Volume +/-, Play/Pause, Next/Previous
Microphone	Built-in for hands-free calls
Water Resistance	IPX5 (splash proof)
Material	Plastic and fabric mesh
Compatible Devices	Smartphones, tablets, laptops
Package Contents	Speaker, Micro USB cable, AUX cable, User manual
Cleaning	Wipe with dry cloth, avoid moisture in openings
Safety	Do not expose to extreme temperatures, do not disassemble
Spare Parts / Repairability	Contact Teesa support for service; battery not user-replaceable

Frequently Asked Questions - TSA1535 Teesa

How do I pair the Teesa TSA1535 with my phone?

Turn on the speaker and enable Bluetooth on your phone. Select 'TSA1535' from the list. If prompted, enter '0000' as PIN.

What is the battery life of the TSA1535?

The battery lasts up to 10 hours at moderate volume. Actual battery life varies with volume level and audio content.

Can I use the speaker while it's charging?

Yes, you can use the speaker when plugged in. However, charging time may increase.

How do I charge the speaker?

Use the included Micro USB cable. Connect to a 5V USB power adapter or computer. The LED indicator will turn red during charging and green when fully charged.

Is the TSA1535 water-resistant?

Yes, it has an IPX5 rating, meaning it can withstand splashes and light rain. Do not submerge in water.

Can I connect the speaker to a non-Bluetooth device?

Yes, use the AUX input with a 3.5mm audio cable (included) to connect devices like MP3 players or laptops.

How do I reset the TSA1535?

If the speaker is unresponsive, press and hold the Power button for 10 seconds to reset. Then turn it on again.

What devices are compatible with the TSA1535?

Any device with Bluetooth (smartphones, tablets) or a 3.5mm audio output can be used.

Why is the speaker not turning on?

Ensure the battery is charged. Press and hold the Power button for 3 seconds. If still off, try charging for at least 30 minutes.

How do I clean the TSA1535?

Use a soft, dry cloth to wipe the exterior. Do not use harsh chemicals or allow moisture into ports or openings.

USER MANUAL TSA1535 Teesa

with temperature control

Close-up of a metallic teapot with a curved handle and lid, showing reflective surface (no text or symbols)

TSA1530 | TSA1535

Bedienungsanleitung

Owner's manual

Εγχειρίδιο χρήσης

Használati utasítás

Instrukcja obsługi

Manual de utilizare

Návod na použitie

DE

EN

GR

HU

PL

RO

SK

DE EN GR HU PL RO SK
Taste entriegeln Release button		Kouμπίαπελευθέρωσης	Fedél nyitó gomb	Przycisk otwieraniapokrywy	Buton eliberare	Tlačidlo otvoreniaveka
Basis Base Báση Taloazat Baza Bază Podstavec
Display Display 0θόνη Kijelző Wyświełacz Ecran Displej
Taste Ein/Aus	On/off button	Kouμπί ενεργοποίησης/ απενεργοποίησης	Be/ki gomb	Przycisk wt./wył.	Buton pornire/oprire	Tlačidlo zap./vyp.
Taste Warmhalten	Keep warmbutton	Κρατήστε το ζεστόκουμπί	Hőmérséklet tartásfunkció gomb	Przycisk funkcjipodtrzymywaniastałej temperatury	Buton pentru funcțiademeṇṭinere atemperaturii	Tlačidlo funkcieudržiavania stálejteploty
Taste -/+	-/+ button	Πλήκτρο - / +	Gomb -/+	Przycisk -/+	Buton -/+	Tlačidlo -/+
Betriebsanzeige	Operationindicator	'Ενδειξη λειτουργίας	Működést jelző	Wskaźnik pracy	Indicator defunçtionare	Indikátor prevádzky
Warmhalte-Anzeige	Keep warmindicator	'Ενδειξη διατήρησηςθερμότητας	Hőmérséklet tartásfunkció jelzés	Wskaźnik funkcjipodtrzymywaniastałej temperatury	Indicator pentrufunctia de menṭinerea temperaturii	Indikátor funkcieudržiavania stálejteploty
-/+ Anzeige	-/+ indicator	'Ενδειξη - / +	Jelzés -/+	Wskaźnik -/+	Indicator -/+	Indikátor -/+

Thank you for purchasing TEESA appliance. Please read this operation instruction carefully before use, and keep it for future use. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.

SAFETY INSTRUCTIONS

In order to reduce the injuries or damages, follow basic safety precautions applied when using any electrical device, including the following:

• Read this instruction manual carefully, even if you are familiar with the appliance. Keep the manual for future reference.
• Before connecting the device to power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage in the power supply socket.
• Place the device on flat, stable surface.
  • ALWAYS turn off the device and disconnect it from the mains supply:
• if it's not operating correctly
• if there's an uncommon voice when using
• before disassembling the device
• before cleaning
• when not in use

• This kettle is intended exclusively for private and not for commercial use.

- Switch off the kettle and remove the plug from the socket when the kettle is not in use, before cleaning or whenever any disturbance occurs. When you disconnect the power cord of the kettle, grasp and pull the plug, not the cord/cable.

• Fixed power cable may only be replaced in an authorized service point.

- Keep the kettle out of the reach of children. Do not leave children unsupervised with the kettle.

- This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner, and all the safety precautions are understood and followed. Children should not play with this device. Children should not perform cleaning and servicing of the device unsupervised.

- Test the kettle and the cord/cable regularly for damage. Before use, make sure the kettle operates properly. In case of any damage, or if the kettle does not operate properly, stop using the kettle and unplug it immediately.

- Do not attempt to repair the kettle yourself, only authorized and qualified personnel may repair this kettle.

- Keep the kettle and cord/cable away from heat, direct sunlight, water, moisture, sharp edges and the like.

• Use only original accessories, do not connect incompatible products.

• The kettle is for indoor use only.

- The base and exterior of the kettle are not water-resistant, keep it dry at all times.

- Under no circumstances must the kettle be placed in water or any liquid or come in contact with liquid. Do not handle the kettle with wet or moist hands. Should the kettle become wet or moist, remove the main plug from the socket immediately.

• DO NOT touch the inner contents of the kettle.

• Use the kettle only for its intended purpose.

• The kettle is only to be used with the base provided.

- Make sure, the mains supply cable does not hang over the edge of the table or a counter on which the kettle is placed.

- Do not use the kettle in the vicinity of explosive and/or flammable fumes. Do not place the kettle near oven and gas or electric cookers.

• Regularly cleaned and descaled kettle prevents from abnormal functioning of the product.

- Do not open the lid when the water is being boiled and for some time after it has been heated, as it may scald and burn skin.

- Do not turn on the kettle if there is no water.

- Do not touch the surface of the kettle when it is filled with hot water; to operate the kettle use the

handle and knobs. Housing of the kettle may increase its temperature - risk of scalding!

• Warning: If the kettle is overfilled, boiling water may be ejected.

WARNINGS

• Use only cold water when filling the device.
• The water level must be between the MAX and MIN marks.
- Switch the kettle off before removing it from the base.
• Always ensure that the lid is tightly closed.
• The base and exterior of the kettle must not become wet.
- Kettle body used must match with the kettle base.

OPERATION

Before using the kettle for the first time, fill the kettle with cold water and boil it. After the kettle switches off automatically, pour the water out, and repeat the process.

1. Fill the kettle with water. Do not overfill, make sure the water level is between MAX and MIN markings. Close the top lid of the kettle (if the lid will not be closed, the kettle will not switch off automatically after boiling is finished).
2. Place the kettle on the base.
3. Connect the kettle to 220-240 V, 50/60 Hz socket.
4. Press the ⏻ key shortly to turn the device on. The operation indicator will turn red and in TSA1530 model illumination will be on. The display will show current temperature of water inside the kettle. The water will be boiled. Once the water is boiled, the device will beep 3 times and automatically enter standby mode (the operation indicator will go off). After 1 minute of inactivity, the device will beep again and switch off (the display will be off).
5. To use maintaining constant temperature/heating to the desired temperature function, turn the
   kettle on with the ⏻ button and then press the 📊 button. Next, press the 📊 button repeatedly to set desired heating temperature, the display will show the set temperature (50 / 60 / 70 / 80 / 90) and the keep warm indicator will be on. Once you stop adjusting the temperature, the numbers will flash 3 times, and then stop flashing which means the function has been activated. The kettle will heat water inside up to the set temperature, and automatically enter standby mode after the temperature is reached. It will turn back on and heat up the water whenever the temperature drops down by around 5°C. The function can be active for up to 8 hours.
6. Note: the kettle can be switched off manually at any time by pushing the power button. Do not remove the kettle from the base without switching off first.
7. Do not open the lid when pouring out the water. If the kettle is overfilled, boiling water may be ejected - RISK OF SCALDING!

MAINTENANCE AND CLEANING

Always remove the plug from the mains supply before cleaning the kettle.

Clean the unit's exterior periodically with a soft, slightly damp cloth. Never use chemical agents to clean this device. Do not use abrasive scouring pads or powers. Do not immerse the kettle in water or other liquids.

After some time, depending on the nature of your water supply, a boiled scale deposit is naturally formed and can be found mostly adhered to the heating element, thus reducing the heating efficiency. The amount of boiled scale deposited largely depends on the water hardness in your area and the frequency

with which the kettle is used. Boiled scale is not harmful to your health, but gives a powdery taste to your drinks if water poured into them was boiled in scaled kettle. The kettle should be descaled periodically as indicated below:

DESCALING

1. Fill the kettle up to MAX with a mixture of one part ordinary vinegar and two parts water. Switch on and wait for the liquid to boil and appliance to switch off automatically.
2. Let the mixture remain inside the kettle overnight.
3. Discard the mixture the next morning.
4. Fill the kettle with clean water up to MAX mark and boil again.
5. Discard the boiled water to remove any remaining scale and vinegar.
6. Rinse the inside of the kettle with clean water.

SPECIFICATION

	TSA1530 TSA1535
Main features	Maintaining constant temperature (8 hours)
	Heating to the desired temperature (50°, 60°, 70°, 80°, 90°)
	Boil dry protection
	Automatic shut off after boiling is finished
	Illumination when boiling: blue	-
	Detachable anti-calc filter
	LED display
	Water level indicator with scale
	Cord storage
	Perfectly shaped spout
	Anti-slip rubber feet
	Wireless
Technical data	Capacity: 1,7 l
	Base: 360° rotary
	Heating element: flat, built-in
	Casing: borosilicate glass, stainless steel and plastic	Casing: stainless steel and plastic
	Color of plastic elements: black
	250 ml boiling time: 78 seconds 250 ml boiling time: 63 seconds
	Cord length: 72 cm
	Power: 1850-2200 W
	Power supply: 220-240 V~, 50/60 Hz

EN

English

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.