RolloTube S-line Sun DuoFern SLDSM - Uncategorized RADEMACHER - Free user manual and instructions
Find the device manual for free RolloTube S-line Sun DuoFern SLDSM RADEMACHER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tubular Motor for Roller Shutters / Sun Blinds |
| Model | RolloTube S-line Sun DuoFern SLDSM |
| Brand | RADEMACHER |
| Power Supply | 230 V AC, 50 Hz |
| Rated Power | 140 W |
| Rated Current | 0.6 A |
| Max Torque | 10 Nm |
| Max Speed | 17 rpm |
| Max Weight of Shutter | 20 kg |
| Motor Length | 540 mm |
| Motor Diameter | 45 mm |
| Radio Frequency | 868 MHz (DuoFern) |
| Range | Up to 100 m in open field |
| Protection Rating | IP 44 |
| Operating Temperature | -20°C to +60°C |
| Noise Level | < 40 dB |
| End Switch Adjustment | Electronic via DuoFern remote |
| Sun Protection Function | Automatic sun tracking (optional sensor) |
| Maintenance | Keep clean, check connections annually |
| Safety Features | Anti-crush detection, thermal overload protection |
| Spare Parts | Available via RADEMACHER service (mounting brackets, adapters) |
| Warranty | 5 years |
| Weight | 2.1 kg |
Frequently Asked Questions - RolloTube S-line Sun DuoFern SLDSM RADEMACHER
How do I pair the RolloTube S-line Sun DuoFern with a remote control?
Press the pairing button on the motor for 3 seconds until the LED blinks. Then press the desired channel on the DuoFern remote. Confirm with a short press on the motor button.
What is the maximum tube diameter for this motor?
The motor is designed for tubes with an inner diameter of 45 mm. Adapters may be needed for other sizes.
Can I use this motor without a DuoFern remote?
No, the motor requires a DuoFern remote or gateway for operation. It cannot be operated with a standard wall switch.
How do I set the upper and lower end limits?
Use the programming button on the motor: press briefly to enter end limit setting mode, then drive to the desired limit and press again to save. Refer to the manual for detailed steps.
What does the 'Sun' function do?
The 'Sun' function allows the motor to automatically close the shutter when sunlight reaches a certain intensity, using an optional external sensor.
The motor does not respond to the remote. What should I check?
Check the remote batteries, ensure the motor is powered, and verify that the motor is within range (max 100 m). Try re-pairing the motor with the remote.
Can I control multiple motors with one remote?
Yes, you can group up to 8 motors by pairing them to the same channel on the DuoFern remote.
How do I reset the motor to factory settings?
Press and hold the programming button for 10 seconds until the LED flashes rapidly. All settings will be cleared.
Is the motor compatible with smart home systems?
Yes, via the RADEMACHER DuoFern Gateway, it can be integrated into systems like HomeMatic, Fibaro, or via the RADEMACHER app.
What should I do if the motor runs but the shutter does not move?
Check the connection between the motor and the tube. Ensure the tube is not jammed. If the motor is over torque, the thermal protection may activate; let it cool down.
User questions about RolloTube S-line Sun DuoFern SLDSM RADEMACHER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual RolloTube S-line Sun DuoFern SLDSM - RADEMACHER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RolloTube S-line Sun DuoFern SLDSM by RADEMACHER.