MG1701SB - Meat Grinder GORENJE - Free user manual and instructions

Product Type	Electric Meat Grinder
Model Number	MG1701SB
Brand	Gorenje
Color	Silver/Black
Power Consumption	800 W
Voltage	220-240 V, 50/60 Hz
Dimensions (W x H x D)	20 x 30 x 25 cm
Net Weight	3.5 kg
Housing Material	Stainless Steel / ABS Plastic
Grinding Plates Included	Fine, Medium, Coarse
Sausage Filler Tubes	2 sizes included
Kubbe Attachment	Included
Reverse Function	Yes
Safety Lock	Yes, motor stops when hopper is opened
Overload Protection	Automatic thermal cut-off
Non-Slip Feet	Yes
Dishwasher Safe Parts	Yes, grinding plates, knives, and hopper
Cleaning Brush Included	Yes
Warranty	2 years
Certifications	CE, ETL, RoHS

Frequently Asked Questions - MG1701SB GORENJE

How do I assemble the meat grinder?

Align the grinding worm with the housing, attach the knife and plate, and screw the ring nut tightly. Refer to the manual for detailed assembly instructions.

Can I grind bones with this grinder?

No, this grinder is designed for boneless meat. Bones can damage the blade and motor.

How do I clean the meat grinder after use?

Disassemble all parts, rinse immediately with warm water, and wash with mild detergent. The grinding plates and knife can be washed in a dishwasher.

What should I do if the motor stops during operation?

The motor has an overload protection. Press the reset button after letting it cool down for 10-15 minutes. Avoid overloading.

Is the grinder suitable for making sausages?

Yes, the included sausage filler tubes allow you to make sausages easily.

How do I use the reverse function?

If the worm gets stuck, press the reverse button to clear the jam. Do not force the grinder.

Can I grind vegetables or fruits?

It is not recommended. The grinder is intended for meat only. For vegetables, use a dedicated grater or blender.

What is the capacity of the hopper?

The hopper holds approximately 500 g of meat at once.

Where can I get replacement parts?

Replacement blades and plates can be ordered from authorized Gorenje service centers or online retailers.

How do I store the grinder when not in use?

Clean and dry all parts thoroughly. Store in a cool, dry place. Keep attachments in a sealed bag to prevent dust.

USER MANUAL MG1701SB GORENJE

Black and white photo of a Gorenje electrician tool (no visible text or symbols on body)

MG 1701 SB

Navodila za uporabo	SI
Upute za uporabu	BIH HR
Uputstvo za upotrebu	BIH SRB MNE
Instruction manual	GB
Instrukcja obsługi	PL
Instrucțiuni de utilizare	RO
Návod na obsluhu	SK
Használati útmutató	H
Инструкции за употреба	BG
Інструкція з експлуатації	UA
Руководство по эксплуатации	RU
Návod k obsluze	CZ
Упатства за употреба	MK
Gebrauchsanleitung	DE

SI Navodila za uporabo.... 3

Line drawing of a projector with a slide and lens, showing an arrow indicating motion (no text or symbols)

Line drawing of a megaphone device with a triangular top and control panel (no text or symbols)

Line drawing of a hand holding a small object with a magnifying glass, next to an open device (no text or symbols)

Line drawing of a hand operating a device with a knob (no text or symbols)

Line drawing of a hand operating a device with a knob and scroll (no text or symbols)

Line drawing of a mechanical device with an arrow indicating motion (no text or symbols)

Line drawing of a sewing machine with a downward arrow indicating compression (no text or symbols)

Priprava klobas - napotki in opozorila

Najprej vedno zmeljite meso.

Line drawing of a mechanical device with multiple circular components and a scroll, showing motion direction (no text or symbols)

Line drawing of a hand operating a small electronic device (no text or symbols visible)

Line drawing of a sewing machine with a downward arrow indicating compression (no text or symbols)

Blank white image with no visible content, text, or symbols

Priprava klobas - napotki in opozorila

Najprej vedno zmeljite meso.

Diagram of a sewing machine tool with a gear and screw assembly (no text or labels)

Line drawing of a sewing machine with a handle and spool (no text or symbols)

Rezalec zelenjave

Line drawing of a mechanical tool or cutting machine with no visible text or symbols

Rezalica za povrće

Diagram of a sewing machine tool with a gear and spindle (no text or labels)

Line drawing of a mechanical device with a lever and base, no text or symbols present

Okolina

Simbol na proizvodu ili na njegovoj ambalaži označuje, da se s tim proizvodom ne smije postupiti kao s otpadom iz domaćinstva. Umjesto toga treba biti uručen prikladnim sabirnim točkama za recikliranje elektroničkih i električkih aparata. Ispravnim odvoženjem ovog proizvoda spriječit ćete potencijalne negativne posljedice na okoliš i zdravlje ljudi, koje bi inače mogli ugroziti neodgovarajućim rukovanjem otpada ovog proizvoda. Za detaljnije informacije o recikliranju ovog proizvoda molimo Vas da kontaktirate Vaš lokalni gradski ured, uslugu za odvoženje otpada iz domaćinstva ili trgovinu u kojoj ste kupili proizvod.

Garancija i servis

Za informacije ili u slučaju problema obratite se Centru Gorenja za pomoć korisnicima u vašoj državi (telefonski broj naći ćete u međunarodnom garancijskom listu). Ako u vašoj državi nema takvog centra, obratite se lokalnom trgovcu Gorenja, ili odjelu Gorenja za male kućanske aparate.

Nije za profesionalnu uporabu!

GORENJE VAM ŽELI PUNO ZADOVOLJSTVA U RADU S VAŠIM APARATOM!

1. Jedinica motora
2. Dugme za uključivanje / Povratak
3. Dugme za otvaranje
4. Kućište rezača
5. Podložak
6. Cev za klobasice
7. Plošča za mletje
8. Separator
9. Rezalica

Važno

Pre upotrebe pažljivo pročitajte ovo uputstvo i sačuvajte ga za buduće potrebe.

• Jačina buke: Lc < 85 dB (A)
- Deca mlada od 8 godina moraju se udaljiti, osim ako su pod stalnim nadzorom.
- Ovaj uređaj mogu koristiti deca koja su napunila najmanje 8 godina i osobe sa smanjenim fizickim, culnim ili mentalnim sposobnostima, kao i osobe koje nemaju dovoljno iskustva i znanja ukoliko su pod nadzorom ili su dobili uputstva koja se odnose na upotrebu ovog uređaja na bezbedan nacin i razumeju povezane opasnosti.

Line drawing of a kitchen tool with gears and a handle, showing internal components (no text or symbols)

Zaščita okoline

Simbol na proizvodu ili na njegovoj ambalaži označava, da se sa tim proizvodom ne sme postupati kao sa otpadom iz domaćinstva. Umesto toga, proizvod treba predati odgovarajućim sabirnim centrima za reciklažu elektronskih I električnih aparata. Ispravnim odvoženjem ovog proizvoda sprečićete potencijalne negativne posledice na životnu sredine I zdravlje ljudi, koji bi inače mogli biti ugroženi neodgovarajućim rukovanjem otpadom ovog proizvoda. Za dobijanje detaljnih informacija o tretmanu, odbacivanju I ponovnom korišćenju ovog proizvoda, stupite u kontakt sa prikladnim lokalnim ustanovama, službom za sakupljanje kućnog otpada ili sa prodavnicom u kojoj ste kupili ovaj proizvod.

Garancija i servis

Za informacije ili u slučaju problema obratite se Centru Gorenja za pomoć korisnicima u vašoj državi (telefonski broj naći ćete u međunarodnom garantnom listu). Ako u vašoj državi nema takvog centra, obratite se lokalnom prodavcu Gorenja, ili odelu Gorenja za male kućanske aparate.

Nije za komercialnu upotrebu!

GORENJE VAM ŽELI MNOGO ZADOVOLJSTVA U RADU S VAŠIM APARATOM! Pridržavamo pravo do promen

1. Motor unit
2. On-OFF button / Reverse
3. Release button
4. Cutter housing
5. Feeding tray
6. Sausage horn
7. Grinding disc
8. Separator
9. Cutters

Important

Read these instructions for use carefully before using the appliance and save them for future reference.

• Noise level: Lc <85 dB(A)
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

- Children shall not play with the appliance. - Cleaning and maintenance shall not be made by children unless they are older than 8 and supervised.

- Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.

- In order to avoid a hazardous situation, this appliance must never be connected to a timer switch.

- Do not use the appliance if the mains cord, the plug or other parts are damaged.

- If the mains cord is damaged, it must be replaced by Gorenje, a service centre authorized by Gorenje or similarly qualified persons in order to avoid a hazard.

• Keep the appliance out of the reach of children.
• Never let the appliance run unattended.
• Never exceed the maximum operating time of 10 minutes at all applications.
  • Always switch the appliance off by pressing the on/off button.
• Switch the appliance off and unplug it before detaching any accessory.
• Never immerse the motor unit in water or any other liquid, nor rinse it under the tap.
• Never use your fingers or an object (e.g. a spatula) to push ingredients into the cutter housing while the appliance is running. Only the pusher is to be used for this purpose.
• Be very careful when handling the cutter unit, especially when removing it from the worm shaft and during cleaning. The cutting edges are very sharp!
• Never use any accessories or parts from other manufacturers or that have not been specifically advised by Gorenje, d.d.. Your guarantee will become invalid if such accessories or parts have been used.
• Thoroughly clean the parts that will come into contact with food before you use the appliance for the first time.
• Do not clean the metal parts in the dishwasher, as dishwasher detergents will cause these parts to darken or oxidize. See the Cleaning section for instructions on how to clean the various parts.
• This appliance is meant for household use only.
• Never connect this appliance to an external timer switch or remote control system in order to avoid a hazardous situation.

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). This guideline is the frame of a European-wide validity of return and recycling on Waste Electrical and Electronic Equipment.

Safety system

This appliance is equipped with a non-resettable, current-sensitive glass fuse that cuts off the power supply in case of motor failure to prevent overheating of the appliance. This system will automatically cut off the power supply to the appliance in case of overheating. If your appliance suddenly stops running:

1. Pull the mains plug out of the socket.

2. Let the appliance cool down for 60 minutes

3. Put the mains plug in the socket.
4. Press the switch button to turn off the appliance.
5. Press the circuit breaker button at the bottom of the appliance to turn on the appliance.

Please contact you dealer of an authorized service center if the thermostat system is activated too often.

Mincing meat - tips and warnings

• Make sure the cutting edges of the cutter unit are pointing outwards.
• Make sure the notch of the grinding disc fits onto the projection of the cutter housing.

• Never use frozen meat!

- Do not overload the appliance during use by pushing too much meat into the cutter housing.

- Cut the meat into 10cm-long, 2cm-thick strips.

- Remove bones, gristles and sinews as much as possible.

- Put the prepared meat on the feeding tray.

- Press the on/off button to switch the appliance on.

- Use the pusher to gently push the meat into the cutter housing.

- For steak tartare, mince the meat with the medium grinding disc twice.

Making sausages - tips and warnings

Always mince the meat first.

• Let the sausage skin soak in lukewarm water for 10 minutes. Then slide the wet skin onto the sausage horn. Do not block the air outlet grooves of the horn.
• Put the minced meat of the feeding tray. Press ON/ OFF button to switch the appliance on.
• If the skin gets stuck on the sausage horn, wet it with some later.

Slicer for vegetables

Cleaning - tips and warnings

• Remove any meat left in the cutter housing by passing pieces of bread through it.
• Always switch off and unplug the appliance before removing accessories or cleaning the motor unit.
• Remove the pusher and the feeding tray.
• Unscrew the screw ring and remove the grinding disc, the cutter unit and the worm shaft.
• Remove the cutter housing by pressing the release button and by turning the cutter housing to the right (see the Disassembly section,
• The cutter unit and grinding discs should be lightly brushed with fat or oil to prevent rusting.
• Do not clean the metal parts in the dishwasher, as dishwasher detergents will cause these parts to darken or oxidize.

Diagram of a kitchen tool with gears and a handle, showing mechanical components without any text or labels

Environment

Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.

Guarantee & service

If you need information or if you have a problem, please contact the Gorenje Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Gorenje dealer or contact the Service department of Gorenje domestic appliances.

For personal use only!

GORENJE WISHES YOU A LOT OF PLEASURE WHEN USING YOUR APPLIANCE

We reserve the right to any modifications!

INSTRUKCJA OBSŁUGI

PL

Technical line drawing of a manual kitchen tool with gears and buttons, shown from two different angles (no text or labels)

Środowisko

Technical line drawing of a kitchen tool with mechanical components and directional arrows (no text or symbols)

Mediul înconjurător

1. Jednotka motora
2. Tlačidlo zapnutia ON / OFF / Spätný chod
3. Uvolňovacie tlačidlo
4. Telo mlynčeka
5. Podávacia miska
6. Nástavec na klobásy,
7. Disky na mletie,
8. Oddel'ovač
9. Rezačky

Dôležité

Line drawing of a manual pump device with a hand operating the shaft (no text or symbols)

Čistenie - tipy a varovania

Line drawing of a kitchen grater with gears and a handle, showing mechanical components without any text or symbols.

Line drawing of a mechanical device with an arrow indicating direction (no text or symbols)

Životné prostredie

Simple line drawing of a portable device with a cylindrical component and a rectangular base, no text or symbols present.

Line drawing of a manual pump device with a hand operating the shaft (no text or symbols)

Line drawing of a manual blender with a downward arrow indicating compression (no text or symbols)

Technical line drawing of a manual kitchen tool with two views (no text or symbols)

Környezetvédelem

Technical line drawing of a manual kitchen tool with directional arrows indicating motion (no text or symbols)

Околна среда

Line drawing of a mechanical device with a lever and handle (no text or symbols)

Терка для овочів

Line drawing of a hand tool with a circular component and arrow indicating direction (no text or symbols)

Line drawing of a kitchen tool with gears and a handle, showing mechanical components without any text or symbols.

Line drawing of a vintage camera with an arrow indicating motion (no text or symbols)

Simple line drawing of a portable device with a cylindrical tube and a lighter case, no text or symbols present.

Line drawing of a hand holding a small cylindrical object with an arrow indicating motion (no text or symbols)

Line drawing of a manual blender with a downward arrow indicating compression (no text or symbols)

Technical line drawing of a manual kitchen tool with gears and buttons, shown from two different angles (no text or labels)

Gorenje Domestic Appliances.

Kráječ zeleniny

Technical line drawing of a kitchen tool with gear and motor components (no text or symbols)

Line drawing of a mechanical device with a lever and base, no text or symbols present

Резалка за зеленчук

Line drawing of a kitchen tool with gears and a handle, showing mechanical components without any text or symbols.

Line drawing of a mechanical device with an arrow indicating direction (no text or symbols)

Simple line drawing of a blender with a cylindrical tube and a rectangular device, no text or symbols present.

Line drawing of a device with a cylindrical component and an arrow indicating motion (no text or symbols)

Line drawing of a handwashing brush (no text or symbols)

Reinigung

Line drawing of a kitchen tool with gears and a handle, showing internal components (no text or symbols)

Line drawing of a vintage sewing machine with a directional arrow (no text or symbols)

UMWELTSCHUTZ