DP-100 - Uncategorized D-LINK - Free user manual and instructions
Find the device manual for free DP-100 D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 1-Port Parallel Print Server |
| Model | DP-100 |
| Brand | D-Link |
| Dimensions (Approx.) | 4.5 x 3.5 x 1.2 inches (114 x 89 x 30 mm) |
| Weight | 0.5 lb (227 g) |
| Power Supply | External AC adapter (5V DC, 2A) |
| Network Interface | 10Base-T Ethernet (RJ-45) |
| Printer Interface | Parallel (DB-25 female) |
| Supported Protocols | TCP/IP, NetBEUI, IPX/SPX |
| Management | Web-based, Telnet, SNMP |
| Print Services | LPR, SMB (Windows sharing), Raw TCP/IP |
| Operating Systems | Windows, macOS, Linux, UNIX |
| LED Indicators | Power, Status, LAN, Printer |
| Reset Button | Yes (factory reset) |
| Maintenance | Keep clean and dry; avoid dust |
| Safety | Use only supplied power adapter; avoid moisture |
| Spare Parts | Power adapter available; no user-serviceable parts |
Frequently Asked Questions - DP-100 D-LINK
How do I set up the D-Link DP-100 print server?
Connect the DP-100 to your network via Ethernet, attach your parallel printer, then plug in power. Use the included Printer Manager software or web browser to assign an IP address. After configuration, install the printer driver on your computer and select the network port.
What protocols does the DP-100 support?
The DP-100 supports TCP/IP, NetBEUI, and IPX/SPX for network communication. It also supports LPR, SMB (Windows sharing), and Raw TCP/IP printing.
How can I reset the DP-100 to factory defaults?
Press and hold the Reset button on the back panel for about 5 seconds until the Status LED blinks. This will restore factory settings including IP address 192.168.0.1.
Is the DP-100 compatible with modern operating systems like Windows 10?
Yes, the DP-100 works with Windows 10, 8, 7, macOS, Linux, and UNIX. You may need to use generic network printer drivers or the print server's standard TCP/IP port.
Can I manage the DP-100 remotely?
Yes, you can manage the DP-100 via web browser (HTTP), Telnet, or SNMP. The web interface allows configuration of IP settings, printer queues, and firmware updates.
What does the LED status indicate?
The Power LED is solid when on. Status LED blinks during startup then steady. LAN LED shows network activity. Printer LED indicates data transfer to printer.
How do I update the firmware on the DP-100?
Download the latest firmware from D-Link support. Access the web interface, go to Tools > Firmware Upgrade, and upload the file. Do not power off during update.
Can I connect multiple printers to one DP-100?
No, the DP-100 has a single parallel port and supports only one printer at a time.
What type of printer cable do I need?
Use a standard parallel printer cable with a DB-25 male connector to connect the printer to the DP-100.
Why is my printer not printing after setup?
Check that the printer is powered on and connected to the DP-100. Verify the IP address is correct in your computer's printer port settings. Ensure the printer driver is installed and set to the network port. Try pinging the DP-100's IP.
User questions about DP-100 D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DP-100 - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DP-100 by D-LINK.