Aplic

303485 - Power bank Aplic - Free user manual and instructions

Find the device manual for free 303485 Aplic in PDF.

📄 12 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Aplic 303485 - page 7
View the manual : Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Power Bank with Hand Warmer
Brand Aplic
Model 303485
Battery Capacity 3000 mAh
Input Charging Voltage 5V DC / 2A
Output Voltage 5V DC / 2A
Dimensions ø72 mm x 21 mm (height)
Heating Levels 2 (approx. 45-50°C and 50-55°C)
Charging Cable Included Micro USB to USB Type A cable
User Manual Included Yes
Power Indicator Blue LED (solid for 10-100%, flashing for low battery)
Hand Warmer Activation Press and hold ON/OFF button for 3-5 seconds
Safety Features Overcharge protection, short-circuit protection, temperature protection
Usage Environment Indoor dry conditions only
Disposal WEEE compliant, do not dispose with household waste
Battery Type Lithium-ion (built-in)
Compatible Devices Smartphones, tablets, and other USB-powered devices (up to 2A)

Frequently Asked Questions - 303485 Aplic

How do I charge the power bank?
Connect the microUSB port of the power bank to a USB power source (e.g., smartphone charger, computer USB port) using the included cable. The blue LED flashes during charging and stays solid when fully charged.
How do I use the hand warmer function?
Press and hold the ON/OFF button for 3-5 seconds to activate the hand warmer. Then briefly press the button to switch between two temperature levels (level 1: ~45-50°C, level 2: ~50-55°C). To turn off, press and hold again for 3-5 seconds.
How can I check the battery level?
Briefly press the ON/OFF button. If the blue LED lights up solid, the battery is between 10% and 100% charged. If it flashes, the battery is nearly empty and needs recharging.
What is the capacity of this power bank?
The battery capacity is 3000 mAh, which provides approximately one full charge for most smartphones.
Can I charge devices while the hand warmer is on?
Yes, the USB output and hand warmer function work independently. You can charge a device while using the hand warmer simultaneously.
How long does it take to fully charge the power bank?
With a 2A charger, it takes approximately 1.5 to 2 hours to fully charge the 3000mAh battery.
Is the power bank safe to use overnight?
Yes, it has overcharge and short-circuit protection. However, it is recommended to disconnect it once fully charged to prolong battery life.
Can I use the hand warmer in wet conditions?
No, the device is only certified for dry indoor use. Keep it away from water, snow, and high humidity.
How should I dispose of the power bank?
Do not throw it in household waste. Follow local regulations for electronic waste (WEEE) or return it to a collection point.
What devices can I charge with this power bank?
Any device that charges via USB with up to 2A current, such as smartphones, tablets, Bluetooth earphones, and more.

User questions about 303485 Aplic

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Power bank in PDF format for free! Find your manual 303485 - Aplic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 303485 by Aplic.

USER MANUAL 303485 Aplic

natural_image Blue abstract logo shape resembling a stylized letter 'Q' or partial circle (no text or symbols)

aplic

Powerbank, 3000mAh, Hand warmer function

ENG: Latest information, drivers, user manuals and data sheets can be found at www.ganzeinfach.de in our download area.

natural_image Two concentric circles drawn with thin lines, no text or symbols present

Aplic 303485 - Powerbank, 3000mAh, Hand warmer function - 1

Thank you for choosing a product from Aplic. Please read the following manual carefully so that you can also enjoy the device. Before starting to use the product, please check if it is complete, faultless and undamaged.

1. Scope of delivery

• Powerbank with hand warmer function
- MicroUSB cable to USB type A cable
- User manual

2. Technical data

Charging voltage 5V DC / 2A
Output voltage 5V DC / 2A
Battery capacity 3000mAh
Dimensions (mm) ø72mm x 21mm (height)
Heating levels 2

3. Product details

Upper side Back side
ON/OFF Button USB Output MicroUSB port (Input) Status LED

4. Start-up

Take the device out of its packaging and remove any packaging material. Fully charge the Powerbank before first use. For charging, use the microUSB port of the powerbank (charging port).

In order to charge devices with the powerbank use the USB port (output) and connect your preferred device to the corresponding charging cable and the powerbank. You can turn the powerbank on and off by shortly pressing the „ON/OFF“ button. The blue LED lights up as soon as the device is turned on.

5. Hand warmer function

  • Press and hold the „ON/OFF“ button of the powerbank for about 3-5 seconds to turn on the hand warmer function.
  • Then shortly press the „ON/OFF“ button to switch between two temperature levels.
  • The red status LED flashes once for heat level 1 at approximately 45^ - 50^ .
  • The red status LED flashes twice for heat level 2 at approximately 50^ - 55^ .

Press and hold the „ON/OFF“ button for about 3-5 seconds to turn off the hand warmer function. In order to completely deactivate the device briefly press the „ON/OFF button“ again.

Aplic 303485 - Hand warmer function - 1

Notice! Please note that the hand warmer function may only be used at low temperatures.

6. Recharging device

Connect the microUSB port (input) to an USB power source by using a microUSB to USB type A connection cable. This can be the charger of your smartphone, a free 5V USB port of your computer or a 5V USB car charger. During the charging process the blue LED flashes. As soon as the process is finished it lights up continuously.

7. Checking battery charging status

Shortly press the „ON/OFF“ button to check the battery charging status. If the LED is blue, it means that the battery is between 10% and 100% charged. If the LED flashes, it means that the battery is nearly empty and needs to be recharged.

Aplic 303485 - Checking battery charging status - 1

Attention!

8. Safety instructions and liability disclaimer

Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components. Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.

Aplic 303485 - Safety instructions and liability disclaimer - 1

9. Disposal instructions

Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly. As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment.

Aplic 303485 - Disposal instructions - 1

10. Instructions on the disposal of batteries

With regard to the sale of batteries or the supply of devices containing batteries, the supplier is obliged to draw the customer's attention to the following: As the end user, the customer has a statutory obligation to return used batteries. He can return old batteries stocked or previously stocked by the supplier in the form of new batteries to the supplier's despatch warehouse (despatch address) free of charge. The symbols shown on the batteries have the following meanings: Pb = battery contains more than 0.004 percent by mass of lead, Cd = battery contains more than 0.002 percent by mass of cadmium, Hg = battery contains more than 0.0005 percent by mass of quicksilver.

Aplic 303485 - Instructions on the disposal of batteries - 1

The symbol of the rubbish bin with a cross through it indicates that the battery may not be put in household waste.

Aplic 303485 - Instructions on the disposal of batteries - 2

WEEE guideline: 2012/19/EU WEEE register number: DE 67896761

WD Plus GmbH hereby declares that the device 303485/20181120SZ141, 303486/20181120SZ141 and 303487/20181120SZ141 is in compliance with the essential requirements and other relevant regulations. A complete Declaration of Conformity is included: WD Plus GmbH, Wohlenbergstrasse 16, 30179 Hanover, Germany

Notes

Aplic 303485 - Notes - 1

Aplic 303485 - Notes - 2

Aplic 303485 - Notes - 3

WD Plus GmbH

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Aplic

Model : 303485

Category : Power bank