303486 - Power bank Aplic - Free user manual and instructions

Product Type	Power Bank with Hand Warmer
Brand	Aplic
Model	303486
Battery Capacity	3000 mAh
Input Voltage / Current	5V DC / 2A
Output Voltage / Current	5V DC / 2A
Dimensions (Diameter x Height)	72 mm x 21 mm
Weight (Approx.)	100 g
Heating Levels	2 (Level 1: 45-50°C, Level 2: 50-55°C)
Charging Port	MicroUSB (Input)
Output Port	USB Type A (Output)
Included Cable	MicroUSB to USB Type A
LED Indicators	Blue (power on), Red (heating status)
Operating Environment	Indoor, dry conditions only
Hand Warmer Activation	Press and hold ON/OFF button for 3-5 seconds
Battery Status Check	Short press ON/OFF: blue LED = 10-100% charge
Safety Features	Overcharge protection, short-circuit protection
Care Instructions	Keep away from water, high heat, and humidity
Disposal	WEEE compliant, do not dispose with household waste
Repairability	Not user-serviceable; do not open

Frequently Asked Questions - 303486 Aplic

How do I charge the power bank?

Connect the microUSB port (input) to a USB power source (e.g., smartphone charger, computer USB port) using the included microUSB to USB Type A cable. The blue LED flashes during charging and stays solid when fully charged.

How do I charge my devices with the power bank?

Connect your device to the USB output port using its charging cable. Short press the ON/OFF button to turn on the power bank. The blue LED indicates it is delivering power.

How do I use the hand warmer function?

Press and hold the ON/OFF button for 3-5 seconds to activate the hand warmer. Then short press to switch between two temperature levels: Level 1 (red LED flashes once, approx. 45-50°C) and Level 2 (red LED flashes twice, approx. 50-55°C). Press and hold again to turn off.

How can I check the battery level?

Short press the ON/OFF button. If the blue LED is solid, the battery is between 10% and 100% charged. If the blue LED flashes, the battery is nearly empty and needs recharging.

What is the battery capacity and how long does it last?

The battery capacity is 3000 mAh. Actual runtime depends on the device being charged and hand warmer usage. For example, it can fully charge most smartphones once.

Can I use the power bank while it is charging?

It is not recommended to use the hand warmer or charge devices while the power bank itself is charging. Follow the manual for safe operation.

Is the power bank waterproof?

No, it is not waterproof. Only use in dry conditions and protect from water, snow, and high humidity.

What should I do if the device gets damaged?

Do not use the device if it has been damaged or dropped. Do not attempt to repair it yourself; contact the manufacturer or retailer. Any unauthorized repair voids the warranty.

How should I dispose of the power bank?

Do not dispose of it with household waste. Follow local regulations for electronic waste (WEEE). Return it to a collection point or to the manufacturer. Batteries must be removed and disposed of separately if possible.

Does the power bank support fast charging?

No, it supports standard 5V/2A charging for both input and output. It is not compatible with Quick Charge or other fast charging protocols.

USER MANUAL 303486 Aplic

Blue abstract logo shape resembling a stylized letter 'Q' or partial circle (no text or symbols)

aplic

Powerbank, 3000mAh, Hand warmer function

ENG: Latest information, drivers, user manuals and data sheets can be found at www.ganzeinfach.de in our download area.

Two concentric circles drawn with thin lines, no text or symbols present

Thank you for choosing a product from Aplic. Please read the following manual carefully so that you can also enjoy the device. Before starting to use the product, please check if it is complete, faultless and undamaged.

1. Scope of delivery

• Powerbank with hand warmer function
- MicroUSB cable to USB type A cable
- User manual

2. Technical data

Charging voltage 5V DC / 2A

Output voltage 5V DC / 2A

Battery capacity 3000mAh

Dimensions (mm) ø72mm x 21mm (height)

Heating levels 2

3. Product details

Upper side Back side

4. Start-up

Take the device out of its packaging and remove any packaging material. Fully charge the Powerbank before first use. For charging, use the microUSB port of the powerbank (charging port).

In order to charge devices with the powerbank use the USB port (output) and connect your preferred device to the corresponding charging cable and the powerbank. You can turn the powerbank on and off by shortly pressing the „ON/OFF“ button. The blue LED lights up as soon as the device is turned on.

5. Hand warmer function

• Press and hold the „ON/OFF“ button of the powerbank for about 3-5 seconds to turn on the hand warmer function.
• Then shortly press the „ON/OFF“ button to switch between two temperature levels.
• The red status LED flashes once for heat level 1 at approximately 45^ - 50^ .
• The red status LED flashes twice for heat level 2 at approximately 50^ - 55^ .

Press and hold the „ON/OFF“ button for about 3-5 seconds to turn off the hand warmer function. In order to completely deactivate the device briefly press the „ON/OFF button“ again.

Notice! Please note that the hand warmer function may only be used at low temperatures.

6. Recharging device

Connect the microUSB port (input) to an USB power source by using a microUSB to USB type A connection cable. This can be the charger of your smartphone, a free 5V USB port of your computer or a 5V USB car charger. During the charging process the blue LED flashes. As soon as the process is finished it lights up continuously.

7. Checking battery charging status

Shortly press the „ON/OFF“ button to check the battery charging status. If the LED is blue, it means that the battery is between 10% and 100% charged. If the LED flashes, it means that the battery is nearly empty and needs to be recharged.

Attention!

8. Safety instructions and liability disclaimer

Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components. Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.

9. Disposal instructions

Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly. As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment.

10. Instructions on the disposal of batteries

With regard to the sale of batteries or the supply of devices containing batteries, the supplier is obliged to draw the customer's attention to the following: As the end user, the customer has a statutory obligation to return used batteries. He can return old batteries stocked or previously stocked by the supplier in the form of new batteries to the supplier's despatch warehouse (despatch address) free of charge. The symbols shown on the batteries have the following meanings: Pb = battery contains more than 0.004 percent by mass of lead, Cd = battery contains more than 0.002 percent by mass of cadmium, Hg = battery contains more than 0.0005 percent by mass of quicksilver.

The symbol of the rubbish bin with a cross through it indicates that the battery may not be put in household waste.

WEEE guideline: 2012/19/EU WEEE register number: DE 67896761

WD Plus GmbH hereby declares that the device 303485/20181120SZ141, 303486/20181120SZ141 and 303487/20181120SZ141 is in compliance with the essential requirements and other relevant regulations. A complete Declaration of Conformity is included: WD Plus GmbH, Wohlenbergstrasse 16, 30179 Hanover, Germany

Notes

WD Plus GmbH