302624 - USB Charger Aplic - Free user manual and instructions

Type	Dual Port USB Charger
Brand	Aplic
Model	302624
Input Voltage	100-240V AC 50/60Hz
Output Voltage	5V DC
Total Output Current	2100mA (2.1A) max
Number of USB Ports	2
Protection Class	II (double insulation)
Operating Temperature	0°C to 50°C
Dimensions (approx.)	5.0 x 3.0 x 2.0 cm
Weight (approx.)	50 g
Housing Material	Plastic
Main Function	Charging mobile devices via USB
Compatible Devices	Smartphones, MP3 players, digital cameras, navigation devices
Safety Features	Overcurrent protection, short-circuit protection
Usage Environment	Indoor, dry conditions only
Maintenance	Wipe with a dry cloth; do not use water
Spare Parts Available	Not available
Repairability	Not user-serviceable; no repair parts
Certifications	CE, WEEE (2012/19/EU)
Warranty	Standard manufacturer warranty; full details in Declaration of Conformity

Frequently Asked Questions - 302624 Aplic

How do I use the Aplic 302624 USB charger?

Connect your device to one of the USB ports using a compatible cable (e.g., microUSB). Then plug the charger into a properly installed wall socket. The output current is a maximum of 2.1A shared between ports.

Can I charge two devices at the same time?

Yes, the charger has two USB ports. However, the total output current is limited to 2100mA. If both devices draw high current, charging may be slower.

What devices are compatible with this charger?

It is compatible with most USB-powered devices such as smartphones, MP3 players, digital cameras, and navigation devices. Ensure the device's current requirement does not exceed 2.1A.

Is the charger safe to leave plugged in?

It is recommended to remove the charger from the socket after charging to avoid constant recharging of connected devices. The charger has protection class II and built-in safety features.

What should I do if the charger gets wet?

Do not use the charger if it has been exposed to water or high humidity. It is only certified for dry indoor conditions. Discard it if damaged and replace with a new one.

Can I use this charger abroad?

Yes, because it accepts an input voltage of 100-240V AC, making it compatible with worldwide mains voltages. You may need a plug adapter for the specific country.

How do I clean the charger?

Unplug the charger before cleaning. Wipe the exterior with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.

What does the LED indicator mean?

The charger does not have an LED indicator according to the manual. Power status is indicated by the device being charged.

Is the charger repairable?

No, the charger is not user-serviceable. Do not attempt to open or repair it. If faulty, dispose of it according to WEEE regulations and purchase a new one.

How should I dispose of the charger?

Do not dispose of it with household waste. Follow local regulations for electrical and electronic equipment. The product is covered by the WEEE Directive 2012/19/EU (Registration number DE 94495668).

USER MANUAL 302624 Aplic

Blue abstract logo shape resembling a stylized letter 'Q' or droplet (no text or symbols)

aplic

DUAL PORT USB CHARGER, 5V/2.1A

Mod.-Nr.: 302624

Table of contents

1. Deutsch....3
2. English....6

Electric plug connected to a cable via a connector, next to a smartphone screen (no text or symbols visible)

Thank you for having chosen this Aplic product and for placing your trust in our company. Please read this manual carefully before installation to ensure your long-term enjoyment of this product. For future reference, please keep this manual.

1 Scope of delivery

• Charger
• User manual

2 Technical data

Input voltage 100-240V AC 50/60Hz
Output voltage 5V DC
Output current max. 2100mA
Working temperature 0°C - 50°C
Port (Output) 2x USB
Protection class 2

3 Use

By dint of this Aplic USB charger, you have the possibility to charge quickly and easily mobile devices such as your smartphones, MP3 players, digital cameras and navigation devices via an electric socket. Please take care that the maximum currents specified for each socket are not exceeded. By the way, also note that the electrical current of the device you want to charge must not be higher than the output current of the USB charger.

4 Getting started

At first, you have to connect your device to a USB port of the charger. For some devices, a separate connection cable (e.g. microUSB cable) is required for this. After it, plug the charger into a properly installed socket.

Important note: Please remove the charger after charging process from the socket in order to avoid constant recharging of the connected devices.

Electric plug connected to a cable via a connector, next to a smartphone screen (no text or symbols visible)

5 Safety instructions and liability disclaimer

Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components. Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.

6 Disposal instructions

Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly. As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment.

WEEE guideline: 2012/19/EU

WEEE register number: DE 94495668

WD Plus GmbH, herewith declares that this product 302624 conforms to the principle requirements and other relevant stipulations. The complete Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover