SLSV45EQG - Safe SereneLife - Free user manual and instructions

Product Type	Electronic Digital Safe Box
Brand	SereneLife
Model	SLSV45EQG
Dimensions (L x W x H)	14.96 x 12.59 x 17.71 inches
Weight	28.6 lbs (13 kg)
Construction Materials	Alloy Steel, Carbon Steel
Steel Thickness (Door)	0.45 inches
Steel Thickness (Body)	0.05 inches
Power Source	4 x AA batteries (included)
Locking Mechanisms	Digital keypad (1-8 digit code) + 2 override keys
Alarm System	Dual alarm: wrong code entry (3 attempts triggers 30s alarm) and vibration alarm
Interior Features	LED light, flannelette lining, 2 removable shelves, key holders for 5 keys
Finishing	Corrosion & stain-resistant powder coat finish
Backup Access	Hidden keyhole, emergency battery box, master keys
Low Battery Indicator	Buzzer beeps twice after opening when voltage is low
Included Accessories	2 master keys, emergency battery box, 4 AA batteries, footpads, fixing bolts
Installation	Wall/floor mounting with included bolts; arrives fully assembled
Maintenance	Clean with soft dry cloth; lubricate keyhole and hinges periodically; remove batteries if unused for long periods
Use Cases	Home, office, or business

Frequently Asked Questions - SLSV45EQG SereneLife

How do I open the safe for the first time?

Remove the master keyhole cover, insert the master key and turn it counterclockwise. Then turn the knob clockwise to open. After opening, install 4 AA batteries in the built-in battery box.

What are the default passwords?

The default user password is 1234 and the default administrator password is 123456. Change them immediately after first use.

How do I change the user password?

Open the door, press the reset button inside on the hinge, enter your new 1-8 digit code, and press # to confirm. Test before closing.

How do I set the administrator password?

Press 0 twice, then press the reset button inside. Enter the new password and press # to confirm.

What happens if I enter the wrong password 3 times?

The safe will trigger a wrong code alarm that sounds for 30 seconds. To stop it, enter the correct password or use the master key.

How do I activate the vibration alarm?

Press the * button to enable vibration alarm mode. If the safe experiences a strong impact, the alarm will sound. Enter the correct password to turn it off.

How do I open the safe if the batteries are dead?

Use the emergency battery box (insert 4 AA batteries, plug into the backup power jack on the control panel) or use the master key to open.

How do I reset the safe to factory settings?

In standby mode, press and hold the reset button inside for about 5 seconds until you hear a long beep. All passwords are deleted, and you can set new ones.

Can I mount the safe to the floor or wall?

Yes. Place the safe at the desired location, mark the mounting holes inside, drill holes, and insert the included fixing bolts. Secure them with screws.

What maintenance does the safe require?

Clean with a soft dry cloth. Periodically lubricate the keyhole and hinges with a small amount of lubricant. Replace batteries when the low-voltage indicator beeps. If not used for a long time, remove batteries to prevent leakage.

USER MANUAL SLSV45EQG SereneLife

Black electronic device with control panel and display, mounted on a textured black surface (no visible text or symbols)

SLSV45EQG

Electronic Digital Safe Box

USER GUIDE

About SereneLife

SereneLife products are designed to create a more comfortable living space, indoors and out. Our team presents innovative lifestyle solutions throughout the year that promote simplicity and serenity.

We're committed to delivering the most dependable products so you can live a better, more serene life.

CONTENTS

FEATURES AND TECHNICAL SPECS 4

SAFETY WARNINGS 5

OPERATION GUIDES 6

MAINTENANCE GUIDE 9

STORAGE GUIDE 10

REGISTER PRODUCT 11

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov

Features:

• Heavy-duty Steel Wall Construction and Soft Lining Interior Material
• User-Friendly Digital Keypad
  • Corrosion & Stain-Resistant Powder Coat Finish
• The 1 mm laser-cut micro seam is key to making it resistant to prying and drilling.
• 2 Ways to Open the Safe Box: (1) 1-8 digits codes, (2) With 2 Override Keys
• 2 Removable Shelves Help Organize Important Things Easily
  • Key Holders for 5 Keys on the Back of the Door to Keep Important Keys
• Internal LED Lights Allow to Find what is Needed in the Dark Quickly
• Inner Chamber furnished with flannelette to Prevent Valuables from Being Scratched or Damaged
• Comes Armed with a Dual Alarm System
• Hidden Keyhole for Added Emergency Access
• Low Battery Indicator
• Includes (2) Keys for Manual Safe Unlocking
• Perfect for Home, Office, or Business Use
• Arrives Fully Assembled

What's in the Box:

• Electronic Safe Box
• Emergency Battery Box
• Footpad
• Fixing Bolt
  • (2) Master Keys
  • (4) AA Batteries

Technical Specs:

• Construction Materials: Alloy Steel, Carbon Steel
• Steel Thickness: (Door) 0.45", (Body) 0.05" -inch
• Item Weight: 28.6 lbs.
• Battery Operated Digital Panel: Requires 4 x AA Batteries (Included)
• Product Dimension (L x W x H): 14.96" x 12.59" x 17.71"-inches

Safety Warnings

1. Do not lock the master key or emergency battery box inside the safe.

Keep them stored properly outside the safe.

1. This type of combination lock can be set up with two different sets of independent

passwords. The passwords can be set with 1-8 digits. The initial passwords are

1234 and 123456, and both sets of passwords need to be changed.

The operation for resetting the password is the same as that for initially setting the password.

1. If a mistake is made during the entering of the administrative password, the “*”

button can be pressed to delete the wrong code entered.

1. If the safe box will not be used for a long time, the battery should be taken out

to prevent leakage of liquid from damaging the electronic system.

Accessories

1. Safe Body
2. Door
3. Control Panel
4. Knob
5. Foot Pads
6. Override Lock
7. Backup Power Jack
8. Battery Compartment
9. Reset Button

Master Keys: 2 Emergency

Battery Box: 1

Foot Pads: 4 Fixing Bolts: 2

Operation Guides

Opening the Safe with the Master Lock and Installing the Battery

- Remove the master keyhole cover, insert the master key and turn it counterclockwise to the limit position. Meanwhile, open the safe by turning the knob clockwise.

• After opening the safe, you will see a built-in battery box on the top back of the door. Open and load the battery.

Line drawing of a hand inserting a small component into a device (no text or symbols)

Set User Password

This method is used to modify the default user password "1234."

- Open the door, find the reset button on the hinge of the door, lightly press the setting button on the back of the door, input your number (1-8 digits), and press the “#” button to confirm.

- Check the new password again before you close the door.

Setting the Administrator Password

(This method is used to modify the administrator password "123456")

- Press the "0" twice, then press the reset button inside the safe box, enter the new password and end it by pressing the "#" button.

• The password can be set from 1-8 numbers.

- Check the new password again before you close the door.

Open the Safe by Password

• Input your number and press "#" again to confirm.
• If the password is successful, you will hear a long beeping sound and the green light will flash. Turn the knob clockwise to open the door.
• If the password is not successful, the error tone of a beeping sound will be heard.

Alarm and Reset

Continuous Wrong Code Alarm

Note: If wrong passwords are entered 3 times, the wrong code alarm function will be triggered for 30 seconds.

To stop the alarm:

1. Please input the correct password to delete the alarm.
2. Use the master key to open the safe.

3. Use the backup battery case:

4. Open the backup battery case.

5. Insert 4 AA batteries into the battery case.
6. Plug the emergency power cord into the power jack located at the bottom side of the control panel.

With the battery-powered supply, the safe can be opened. Then enter the correct password to open the safe.

Vibration Alarm

• Press the "*" button to enable vibration alarm mode.
• When the safe experiences a strong impact, an alarm will sound.
• To stop the alarm, enter the correct password.

Line drawing of a safe with a hand hammer striking the interior (no text or symbols)

Low-Voltage Reminder

• The safe requires four 1.5V alkaline batteries. If the voltage is insufficient, the buzzer will beep twice after opening the safe to remind you that the batteries need to be replaced.
• If the battery voltage is too low to open the safe, use the backup power supply or master key.

Restoring to Factory Default

• In standby mode, press and hold the reset button inside the safe for approximately 5 seconds.
• You will hear a long beep, indicating that all passwords have been successfully deleted, and the safe has been restored to factory settings.
• You can now add a new password following the instructions above.

Installation and Fixing

• Place the safe in the desired installation location and mark the mounting holes inside the safe.
• Remove the safe and drill two holes at the marked positions.
• Insert the fixing bolts into the drilled holes and remove the screws from the bolts.

Maintenance Guide

1. Cleaning: Regularly clean the exterior of the safe with a soft, dry cloth to remove dust and fingerprints. Avoid using abrasive cleaners or harsh chemicals, as these can damage the safe's surface.

2. Lubrication: Periodically apply a small amount of lubricant to the keyhole and hinges to ensure smooth operation. Avoid over-lubricating, as excess oil can attract dust and dirt.

3. Battery Maintenance: Check the batteries regularly and replace them if you notice low-voltage reminders such as the buzzer beeping twice after opening the safe. If the safe will not be used for an extended period, remove the batteries to prevent leakage that could damage the electronic system.

4. Hardware Inspection: Inspect the safe's locking mechanism and hinges periodically to ensure they are working correctly. Tighten any loose screws or bolts to maintain the safe's structural integrity.
5. Preventing Moisture Damage: Ensure the safe is placed in a dry location to prevent moisture damage. If the safe is exposed to moisture, wipe it dry immediately.

Storage Guide

1. Location: Store the safe in a secure, dry location away from direct sunlight and moisture to prevent warping and damage. Place the safe in a discreet location to avoid attracting unwanted attention.
2. Key and Password Security: Keep your owner and master keys in a separate, secure location away from the safe. Avoid writing down passwords or fingerprints near the safe to maintain security.
3. Backup Battery Case: Store the backup battery case in a safe place, accessible if needed for emergencies.
4. Long-Term Storage: If storing the safe long-term without use, remove the batteries and ensure the safe is locked securely. Periodically check the safe and its components for any signs of wear or damage during storage.

By following these maintenance and storage guidelines, you can ensure the safe remains in good working order and retains its security features over time.

Register Product

Thank you for choosing SereneLife. By registering your product, you ensure that you receive the full benefits of our exclusive warranty and personalized customer support.

Complete the form to access expert support and to keep your SereneLife purchase in perfect condition.

Serenelifehome.com/ register

serenelife™

Questions or Comments?

We are here to help!

Phone: [phone]

Serenelifehome.com/ContactUs