DPM106 - Cooker DPM - Free user manual and instructions

Product Type	Single Induction Cooker
Brand	DPM
Model	DPM106
Power Supply	220-240V~, 50/60Hz
Rated Power	2000W
Cooking Modes	Fry (8 temperature levels: 80, 100, 130, 160, 180, 210, 240, 270 °C), Boil (8 power levels: 200, 500, 800, 1000, 1000, 1300, 1600, 1800, 2000W), Heat Up (500W), Stew (1300W)
Timer Function	Yes, up to 3 hours for Fry/Boil, up to 24 hours for Heat Up/Stew
Pan Detection	Automatic, displays error code E0 for incompatible cookware
Overheat Protection	Yes, automatic shut-off (error E6)
Control Panel	Touch buttons with LED display
Suitable Cookware	Iron or stainless steel, flat bottom, diameter 12-25 cm, max weight 5 kg
Safety Features	Auto shut-off, child safety (from 8 years), do not immerse, keep away from pacemakers
Cleaning	Wipe with damp cloth after cooling; do not use abrasive cleaners or immerse
Plug Type	VDE (European standard)
Certifications	Compliant with electrical safety and electromagnetic compatibility regulations
Additional Features	Energy consumption display (kWh), voltage display
Manufacturer	DP srl, Via S. D'Acquisto, 5 Aversa 81031 (CE), Italy
Country of Origin	China
Warranty	Contact manufacturer or authorized service center for repairs
Manual Languages	English, Italian (and others available)

Frequently Asked Questions - DPM106 DPM

How do I select a cooking mode on the DPM106 induction cooker?

After plugging in and placing a compatible pot, press the ON/OFF button to turn on the device. The display shows 'ON'. Then press the FUNCTION button to cycle through modes: Fry, Boil, Heat Up, and Stew. Use the + and - buttons to adjust temperature or power level.

What type of cookware is compatible with the induction cooker?

Only cookware made of iron or stainless steel with a flat bottom is suitable. The diameter must be between 12 cm and 25 cm, and the total weight (including contents) must not exceed 5 kg. Avoid non-ferrous metals, ceramics, glass, aluminum, and copper.

What does error code E0 mean?

Error E0 indicates that the cookware is not compatible or is not positioned correctly. Ensure the pot is made of magnetic material, has a flat bottom between 12-25 cm, and is centered on the cooking zone. If the problem persists after 60 seconds, the device returns to standby mode.

How do I set the timer on the DPM106?

In Fry or Boil mode, press TIMER/PRESET to set a countdown timer (display shows '0:10'). Use + to add 10 minutes, - to subtract 1 minute, up to 3 hours. In Heat Up or Stew mode, press TIMER/PRESET to set a delayed start (display shows '0:30'), with increments of 30 minutes, up to 24 hours.

Can I use aluminum or glass cookware on this induction hob?

No. Aluminum, glass, ceramic, copper, and non-ferrous metals are not magnetic and will not work. The hob will display error E0 and beep until the incompatible pot is removed.

How should I clean the induction cooker?

Always unplug the device and allow it to cool completely. Use a damp soft cloth or sponge to wipe the surface. For stubborn residues, use a mild cleaner suitable for induction hobs. Never immerse the device in water or use abrasive cleaners.

What is the maximum power consumption of the DPM106?

The rated power is 2000W at 220-240V, 50/60Hz. The actual power depends on the selected cooking mode and power level.

Is it safe to leave the induction cooker unattended while cooking?

No. The manual states: Do not leave the appliance unattended while it is in operation. Always supervise cooking, especially when using high temperatures or oils.

What should I do if the induction cooker does not turn on?

First, ensure the plug is securely connected to a working power outlet. Check for a power outage. Then press the ON/OFF button. If it still does not turn on, the device may be damaged; contact an authorized service center.

What does error code E2 mean and how to fix it?

Error E2 indicates the IGBT sensor is overheating. This can happen if the hob is used for prolonged periods or if ventilation is blocked. Turn off the device and let it cool down completely before restarting. Ensure at least 10 cm clearance around the unit.

USER MANUAL DPM106 DPM

INDICE

Avvertenze 2

Parametri tecnici 4

Primo utilizzo 4

Modo d'uso 5

SINGLE/DOUBLE INDUCTION COOKER- ILKE/HUGO

CONTENTS

Safety instructions 14

Specifications 16

First use guidelines 16

Mode of use 17

Suitable cookware 19

Care&Maintenance 20

Troubleshooting 21

Waste disposal 23

User manual

DPM106/DPM108 - 2000W/2000W+1500W - 220\~240V, 50/60Hz

Thank you for purchasing one of our products. Please read carefully the user manual and all operating instructions before use.

SAFETY INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

• Do not immerse the product in water or rinse it under the tap, as it contains electrical parts and heating elements.
• Do not allow water or other liquids to get inside the appliance. Risk of electric shock.
• To avoid burns, do not touch the induction plate while it is operating or right after it has been switched off.
• This appliance is not designed to be operated by means of external timers and/or remote controls.
• The manufacturer disclaims any liability for damages due to an improper use of the induction cooker.
• Do not use the product if it has been dropped and/or shows visible signs of damage.
• If the induction cooker is damaged and/or it shows certain error codes (found in the troubleshooting section), it must be replaced or repaired by an authorised service centre or qualified personnel indicated by the manufacturer in order to avoid any danger. (available at: http://ticket.audiovideocenter.it/catnetregioni95.html)
• Before connecting the plug to the power socket, check that the voltage indicated on the appliance corresponds to that of the household installation.
• Do not use the induction cooker if the plug, the power cord or the appliance itself is damaged.
• If the power cable is damaged, it must be replaced by the authorised service centre or qualified personnel in order to avoid danger.
• This product can be used by children from 8 years of age and is not intended for use by persons (including children) with reduced physical, sensory or mental capacities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the induction cooker.

• Children aged between 3 and 8 years should only turn the induction cooker on or off under the supervision of an adult responsible for them, and under no circumstances should they adjust or clean the appliance.
  • Always ensure that the plug is inserted correctly.
• Never place the appliance against a wall or other appliances. Leave a clearance of at least 10 cm at the back, sides and above the induction cooker.
• Do not leave the appliance unattended while it is in operation.
• To avoid electrical failure, make sure to use the product only on flat and dry surfaces.
• During use, accessible surfaces can become very hot. Do not touch anything other than the button panel.
• This appliance is intended for domestic use only. It must not be used in the dining rooms of shops, offices, companies or other work environments. Furthermore, it must not be used by customers in hotels, motels, guesthouses, breakfast rooms or other accommodation environments.
• If the appliance is used incorrectly, or for professional or semi-professional purposes, or if it is not used in accordance with the instructions in this manual, the warranty will become invalid and the manufacturer will not be liable for any damage caused.
• Do not attempt to repair the device yourself, otherwise the warranty becomes invalid.
• Always unplug the appliance from the wall socket after use.
• Before handling or cleaning the appliance, allow it to cool down for about 30 minutes.
• Do not let children play with this appliance.
• Do not move the product around while it is functioning.
• Do not use the product under direct sunlight.
• Do not use the product near other heat sources or gas sources.

• To avoid explosions due to thermal expansion, do not place sealed containers on top when in operation.

• Do not place paper, aluminum foil, cloth, or other unsuitable articles onto the induction cooker heating plate to avoid hazards.

• Do not plug in the appliance with wet hands.
• People wearing pacemakers must not use this cooker.
• Maintain a minimum distance of 60 cm when operating the hob.
• Do not leave cutlery or similar utensils on the hob when in use.
• Do not place the appliance near objects which are sensitive to magnetic fields (e.g. radio, TV).

WARNING: Keep the induction hob away from flammable materials.

WARNING: Danger of scalding.

CAUTION: Hot Surface

Thanks to the technology used by our induction hobs you will be able to take advantage of many perks such as faster cooking speed, easier cleaning operations and lower energy consumption compared to a traditional hob.

SPECIFICATIONS

Model	DPM106/DPM108 - ILKE/HUGO
Rated voltage	220-240V, 50/60Hz
Rated power	2000W / 2000W+1500W
Plug	VDE

First Use

1. Remove all packaging materials.
2. Remove any stickers or labels on the product.
3. Make sure the product has no visible damage or defects.
4. Clean the top of the product with a dry cloth, you can use a moist cloth to clean the control panel, then, before using the hob, make sure that it is completely dry.

Preparation for use

1. Place the product on a stable, flat and even surface. Only place it on heat-resistant surfaces and away from flammable objects.
2. Make sure that the product is completely dry.
3. Connect the plug to a power outlet.

Mode of use

This induction hob can be used to cook a huge variety of products thanks to the 4 different cooking modes, in the following section of this manual, it is shown how to use the product and which pot materials are compatible with it.

Selecting cooking modes

1. Connect the plug to a grounded power outlet.
2. The product will then enter standby mode by emitting an acoustic tone.
3. Place a pot that meets the requirements listed in the section below.
4. Press the "ON/OFF" button, the display will now show the wording "ON", use the "FUNCTION" button (DPM106) or the corresponding buttons (DPM108) to choose the desired mode.

Note: Do not touch the pot during and/or shortly after use, as it will be very hot. Touch the control panel only.

• FRY : Select the desired cooking temperature through the + and - buttons, it is possible to choose between 8 different temperatures: 80/100/130/160/180/210/240/270 °C
• BOIL : (DPM106 only): Select the desired power level through the + and - buttons, it is possible to choose between 8 different power levels: 200/500/800/1000/1000/1300/1600/1800/2000W.
  (DPM108 only): Select the desired power level through the + and - buttons, it is possible to choose between 8 different power levels: LEFT SIDE BURNER 200/500/800/1000/1200/1300/1400/1500W LIGHT SIDE BURNER 200/500/800/1000/1000/1300/1600/1800/2000W.

• HEAT UP : Power level is set to 500W.

• STEW : Power level is set to 1300W.

1. Select, if necessary, the desired on/off timer:

- BOIL and FRY modes: when pressing the TIMER/PRESET button, the display will show "0:10", select the desired timer duration through the + and - buttons. The + button will add 10 minutes; the - button will take one minute off the timer, for a maximum duration of 3 hours.

Note: This timer will keep the hob working until the timer has expired, the device will then go back to standby mode.

- STEW and HEAT UP modes: when pressing the TIMER/PRESET button, the display will show "0:30", select the desired timer duration through the + and - buttons. The + button will add 30 minutes, the - button will take one minute off the timer, for a maximum duration of 24 hours.

Note: This On timer will leave the device in standby mode, the hob will then turn on and start the cooking phase once the set timer has expired.

- The timer can be changed at any time by following the same procedure.

- The timer can be eliminated by setting it to "00:00", in this case the device will continue to operate until manually switched off.

1. Once the food is ready, turn off the device by using the ON/OFF button.

Note: The "ELECTRICITY" button displays the current voltage calculated at the moment of pressing the button once, or, by pressing the key twice, the number of kWh consumed since the product was switched on will be visualized (P0.04 = 0.04kWh)

The hob has a cookware recognition function, if it detects an unsuitable pan, the display will show the code "E0" combined with acoustic signals. For security reasons, the product will return to standby mode after 60 seconds. During these 60 seconds the hob will continue to work so be careful NOT to touch the plate as it will present very high temperatures.

SUITABLE COOKWARE

To use the induction hob, you must use pans made with magnetizable material. The most recent cookware, when purchased, usually comes with an induction hob compatibility label, if you are using older cookware or are unsure about the material of your new cookware, make sure that:

• The pot or pan used has a diameter of at least 12 cm.
• The total weight does not exceed 5 kgs.
• The material that makes up the pot or pan must be iron or stainless steel.
• The bottom of the pot is flat and not curved, with no feet or round shapes.

Note: It is not possible to use pots or pans made of non-ferrous metals, ceramics, glass, aluminum, copper.

You can check if the pot is suitable by placing it (filled with water do not place empty pots on the plate) on the hob, if it is not suitable, the display will show the error code "E0" combined with acoustic signals.

CARE & MAINTENANCE

You can clean the hob once it has been used, to remove any food or other residues. The use of soft cloths, sponges and products suitable for cleaning the product is recommended.

1. Disconnect the plug from the power socket and allow the appliance to cool down.
2. Use a damp cloth to wipe the surface of the product.
3. Do not immerse and do not place the product under running water for any reason.
4. Make sure that no fluid matter gets into any of the openings of the housing. This might damage the device or result in an electric shock.
5. Clean the button panel using a damp sponge, then carefully dry it with a soft dry cloth.
6. In the case of stubborn food remains, use suitable cleaning products available in specialized sections of department stores.
7. Do not use a hard brush, any abrasive item, acidic or abrasive detergents to clean the product.
8. Do not use acidic or abrasive detergents to clean the product.
9. In case of prolonged non-use, store the product in its original box and keep it in a dry and ventilated place, out of reach of children.

TROUBLESHOOTING

Note: Remember that the hob surface could be damaged if a heavy object falls on it: this type of damage is not covered by the warranty.

PROBLEM	POSSIBLE CAUSE	SOLUTION
The hob is not turning on.	1. The plug is not connected to the power socket.2. The device has not been turned on, or there is a power outage ongoing.	1. Connect the plug to a compatible outlet.2. Make sure there is not an ongoing power outage.3. Turn the appliance on through the ON/OFF button.
BEEP sound	The pot is not compatible or it has not been positioned correctly on the plate.	1. Make sure that the pan is compatible according to the paragraph on the previous pages.2. Make sure that the bottom of the pan has its diameter equal or greater than 12 cm and less than 25 cm, also, place it exactly in the center of the cooking circle spot.
Error E0	The pot is not compatible or it has not been positioned correctly on the plate.	1. Make sure that the pan is compatible according to the paragraph on the previous pages.2. Make sure that the bottom of the pan has its diameter equal or greater than 12 cm and less than 25 cm, also, place it exactly in thecenter of the cooking circle spot.
Error E1	IGBT sensor damaged.	Do not use the product, if the warranty is still valid, the product will get replaced by our customer service.
Error E2	IGBT sensor overheating.	Turn off the device to let it cool down.
Error E3	Voltage is too high (>280V).	Make sure there are no problems with the electrical system in the house. Restart the device.
Error E4	Voltage is too low (<85V).	Make sure there are no problems with the electrical system in the house. Restart the device.
Error E5	Internal short circuit.	Restart the device, if the problem persists the internal circuit might be damaged. Do not attempt to repair, if the product is still under warranty, it will get replaced by our customer service
Error E6	Overheating protection.	The induction hob has reached high temperatures and turned off automatically. Let it cool down entirely before using it again.
Error E7 / E8	Display error.	Restart the device.
Error E9	Induction heating system problem.	The induction heating system could be damaged. Do not attempt to repair. If the product is still under warranty, it will get replaced by our customer service.

This product is compliant with current regulations on electrical safety and electromagnetic compatibility.

MADE IN CHINA - Imported and distributed by DP srl - Via S. D'Acquisto, 5 Aversa 81031 (CE) - Tel. [phone] - https://www.dpm-ped.com/ - [e-mail]

Product/s model/s.: DPM106/DPM108 - ILKE/HUGO

WASTE DISPOSAL:

DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste electrical and electronic equipment (WEEE). Member States shall adopt appropriate measures to minimise the disposal of WEEE in the form of unsorted municipal waste, to ensure the correct treatment of all collected WEEE and to achieve a high level of separate collection of WEEE.

The symbol indicating separate collection for EEE consists of the crossed-out wheeled bin, as shown below. The symbol must be printed visibly legibly and indelibly.

erion