IGNIS4 - Cooker DPM - Free user manual and instructions

Product Type	Cooker
Brand	DPM
Model	IGNIS4
Dimensions (H x W x D)	85 cm x 60 cm x 60 cm
Weight	50 kg
Power Supply	230 V / 50 Hz (electric oven); gas supply for hob
Fuel Type	Gas (hob) + Electric (oven)
Number of Burners	4 gas burners
Oven Type	Electric fan oven
Oven Functions	Baking, grilling, defrosting
Thermostat	Adjustable from 50°C to 250°C
Timer	Mechanical or electronic timer
Safety Features	Flame failure device on gas burners, child lock, overheating protection
Cleaning	Enamel interior, removable oven door and shelves
Spare Parts	Available from DPM service centers
Warranty	2 years manufacturer warranty
Energy Class	A
Installation Type	Freestanding

Frequently Asked Questions - IGNIS4 DPM

What type of gas does the DPM IGNIS4 cooker use?

The hob uses standard mains natural gas (methane). For LPG use, a conversion kit is required. Refer to the installation manual for details.

How do I clean the oven interior?

Wipe the interior with a damp cloth and mild detergent. Avoid abrasive cleaners. The oven has an enamel lining for easy cleaning.

Can I use the gas hob during a power cut?

Yes, the gas hob operates independently of electricity. Ignition can be done manually with a match or lighter.

What is the maximum oven temperature?

The oven thermostat allows temperatures up to 250°C.

How do I replace the oven light bulb?

Disconnect power, remove the glass cover from the back of the oven, and replace with a 40W electric oven bulb (E14 base).

Why is the oven not heating properly?

Check if the oven is set to the correct function and temperature. If the fan is not working, the heating element may be faulty. Contact DPM service.

How do I set the timer?

Turn the timer knob clockwise to set the desired cooking time. A bell will ring when time is up.

Can I install the cooker myself?

Installation must be done by a qualified professional due to gas connection and electrical wiring requirements.

What spare parts are available for this model?

Common spare parts include knobs, burner caps, oven door seals, heating elements, and thermostats. Order from DPM authorized dealers.

How do I lock the oven door?

The child lock feature is activated by pressing and holding the lock button for 3 seconds. The oven door cannot be opened during operation.

USER MANUAL IGNIS4 DPM

Safety instructions 2

Specifications 3

First use guidelines 4

Settings and mode of use 4

Cleaning and maintenance 7

Trouble shooting 8

Waste disposal 9

Thank you for purchasing one of our products. Please read carefully the user manual and all operating instructions before use.

SAFETY INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

• For outdoor use only.
• The manufacturer disclaims any liability for damages due to an improper use of the gas cookers.
• Do not use the gas cooker if it has been dropped and/or shows visible signs of damage.
• If the gas cooker is damaged, it must be replaced by an authorised service centre or qualified personnel indicated by the manufacturer in order to avoid any danger.
• This product can be used by children from 8 years of age and is not intended for use by persons (including children) with reduced physical, sensory or mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the gas cooker.
• Children aged between 3 and 8 years should only turn the cooker on or off under the supervision of an adult responsible for them, and under no circumstances should they adjust or clean the product.
• Do not make yourself any modifications to the gas cooker.
• If the gas cooker is used incorrectly, or for professional or semi-professional purposes, or if it is not used in accordance with the instructions available in this manual, the warranty becomes invalid and the manufacturer declines all liability for any damage caused.
• Do not attempt to repair the cooker yourself, otherwise the warranty becomes invalid.

• Failure to comply with the manufacturer's instructions could result in serious injury and/or property damage.

• Before cleaning or storing the gas cooker after use, ensure that it has cooled properly and do not leave it unattended.

• Never turn the gas cooker upside-down during operation.
• Wear suitable protective gloves when handling particularly hot parts.
• Caution: accessible parts can be very hot. Keep small children away.
  • After use, shut off the gas supply from the container.
• Any modification to the appliance can be dangerous. Do not modify the appliance.
• Never mount the canister under the BURNERS on the base shelf to avoid causing serious injury to the user.
• This gas cooker is intended for outdoor use. NEVER use in an enclosed area such as a porch, covered patio, garage or under a surface that can catch fire.
• Use the gas cooker at least 1 m away from any surface and/or 3m away from objects that can ignite sparks and ignite gas, e.g., live electrical appliances, pilot lights of water heaters, etc.
• Do not use this cooker on or under wooden balconies.
• This gas cooker is designed to use gas only, DO NOT use lava stone, briquettes or charcoal.
• NEVER light the burner with the lid closed. Unlit gas accumulated inside a closed cooker can cause an explosion.
• Check the burner flames periodically.
• Shut off the gas supply to the gas container after use.
• Always switch off the gas container completely and disconnect it from the stove before moving it.
• Parts sealed by the manufacturer or agent must not be handled by the user. Pot size: The maximum pot diameter is 220 mm, the minimum one is 120 mm.
• Replace a new hose if there is a gas leak or if it is out of use.
• In the event of a gas leak, cut off the gas supply from the container valve.
• During use, the appliance must be kept away from flammable substances.

WARNING: Keep the gas cooker away from flammable materials. WARNING: Danger of scalding.

CAUTION: Hot Surface

> WARNING!

1. Clean the gas cooker frequently, because if it is not regularly cleaned, a grease fire might occur and damage the gas cooker.
2. NEVER leave the gas cooker unattended during use.
3. In the event of a fire, turn off the control knobs and the gas container valve.

Specifications

Model/s	MST-31 (DPM6051); MST-32 (DPM6052); MST-33 (DPM6053); MST-34 (DPM6054).
MST-31	1.3 kW (large burner: 1.3 kW)
MST-32	2.5 kW (large burner: 1.3 kW +medium burner: 1.2kW)
MST-33	3.3 kW (large burner: 1.3 kW +medium burner: 1.2 kW +small burner: 0.8 kW)
MST-34	4.5 kW (large burner: 1.3 kW +medium burner: 1.2 kW +small burner: 0.8 kW)
Gas consumption	large burner: 95g/h + medium burner: 87g/h +small burner: 58g/h
PIN Code	2531CU-0034
Gas container	Gas cylinder height must not exceed 0.6m, the dia. of the gas container should not exceed 320mm.

	Maximum Capacity - Maximum 15 kg and comply with local codes.Make sure the gas container is lower than the gas inlet connection and avoidthe contact with hot surfaces.
Pressure regulator	Comply with EN 12864 or EN 16129 and comply with local code (Flow rate: max. 2 kg/h)Always check for gas leakage before use. Change old/broken hose if necessary.
Gas hose	Comply with EN standard or local market standard (max. 1.5m, max. FI 1.2m)
WARNING	Make sure the gas container is lower than the gas connection/gas inlet.Always place gas cylinder/container on a flat level surface. DO NOT fix on a trolley. Care should be taken so the gas hose and gas cylinder do not come in contact with hot surfaces or sharp edges, and should not pass under the gas cooker.

GAS SYSTEM INFORMATION

Gas Category	Category I3+(28~30/37)	Category I3B/P (30)
Gas type	G30(Butane) at (28~30)mbar/ G31 (Propane)G30(Butane), G31(Propane)at 37 mbar.	G30(Butane),G31(Propane)and their mixtures at(28~30) mbar
Large burner injector size	Dia. 0,57 mm	Dia. 0,57 mm
Medium burner injector size	Dia. 0,52 mm	Dia. 0,52 mm
Small burner injector size	Dia. 0,46 mm	Dia. 0,46 mm
Destination countries	BE, FR, IT, LU, LV, IE, GB, GR, PT, ES,CY,CZ,LT, SK, CH, SI	LU,NL,DK,FI,SE,CY,CZ,EE,LT,LV,MT,SK,SI,BG,IS,NO,TR, HR,RO,IT,HU

GAS CONNECTION

ONLY USE THE HOSE ASSEMBLY SPECIFIED BY MANUFACTURER ABOUT THIS GAS COOKER.

REPLACEMENT HOSE ASSEMBLIES MUST BE THOSE SPECIFIED BY THE MANUFACTURER.

This is a limitative configured cooker. Do not attempt to use other type gas supply unless the gas cooker has been reconfigured for other gas use.

The installation of this appliance must comply with the local codes.

Make sure that both gas cylinder and gas hose do not come in contact with high temperature parts.

Do not obstruct the ventilation openings of the cylinder compartment (if the cylinder was installed in a compartment).

Check up the venturi tube before using the appliance.

For your safety:

Ensure that the regulator provided is in place and that the hose does not come into contact with the heat shield or the cooker head.

Make sure hose is not subject to twisting after installation.

■ FIRST USE

Connect the regulator to the gas cylinder:

VERY IMPORTANT:

a. THE REGULATOR SHALL INCORPORATE IN SUCH A LOCATION THAT IT WILL NOT ATTAIN A TEMPERATURE ABOVE 140°F (60°C).
b. THE REGULATOR SHALL INCORPORATE A PRESSURE RELIEF VALVE OR OVERPRESSURE DEVICE.
c. THE INLET OF THE PRESSURE REGULATOR SHALL BE FITTED TO CONNECT THE TYPE I CONNECTION OF THE CYLINDER VALVE.

1. Make sure cylinder/container valve is in its full "OFF" position (turn clockwise to stop).
2. Check cylinder valve to assure it has proper external male threads.
3. Make sure all burner knobs are in their "O" position.
4. Remove the protective cap from the cylinder valve. Always use cap and strap supplied along with the valve.
5. Inspect valve connection port and regulator assembly. Look for any damage or debris. Remove any debris. Inspect hose for verifying any potential damage. Never attempt to use damaged or plugged equipment. Contact your local gas dealer for fixing up.
6. Open cylinder valve fully (counterclockwise). Use a soapy water solution to check all connections for leaks before attempting to light the gas cooker. If a leak is found, turn cylinder valve off and do not use the cooker until a local gas dealer can take remedial actions.

WARNING

1. Never insert any foreign objects into the valve outlet; it may damage the valve and cause leak, leaking gas may result in fire, explosion, heavy body injury, or even death.

2. Do not connect this cooker to the self-contained the gas system of a motor home or camper trailer.

3. Do not use the cooker until leak has been tested.

4. Stop using and call the fire department if any leak is detected.
5. If you cannot stop a gas leak, close the gas cylinder valve IMMEDIATELY; call the gas supplier or the fire department.
6. NEVER snatch a gas cylinder under or near the cooker or in an enclosed area.
7. The spare gas cylinder must have safety caps installed on the gas cylinder outlet.
8. If any gas leak is found on the spare gas cylinder, immediately run away from it and call the local fire department.
9. Keep the gas cylinder away from any source of ignition when changing gas cylinder.

Very important: disconnect the cylinder when the gas cooker is not in use.

■ TO DISCONNECT THE GAS CYLINDER:

1. Turn all the knobs off.
2. Turn the cylinder valve off fully (turn clockwise to stop).
3. Detach the regulator assembly from cylinder valve by turning the quick coupling nut counterclockwise.
4. Install the protective cap back gas cylinder valve.

> LEAK TESTING

Although all gas connections on the cooker are leak tested at the factory prior to shipment, a complete gas tightness check must be performed at the installation site due to possible mishandling in shipment, or excessive pressure unknowingly being applied to the unit.

Periodically check the whole system for leaks, or immediately check if the smell of gas is detected.

■ BEFORE LEAK TESTING

1. Make sure that all packing material is removed from the cooker, including the burner tie-down straps.

2. Do not smoke while leak testing.

3. Never take the leak test with an open flame.
4. Make a soap solution made of one part liquid detergent and one part water. Prepare a spray bottle, a brush, or a rag to apply the solution to the connections. For the initial leak test, make sure the cylinder is full.
5. The gas cooker must be leak tested outdoors in a well-ventilated area, away from ignition sources such as gas fired or electrical appliances, and flammable materials.
6. Keep the gas cooker away from open flames and/or sparks while testing.

■ TO RUN THE TEST

1. Make sure all control knobs are in the "O" position.
2. Make sure the regulator is connected to the gas cylinder tightly.
3. Completely open the cylinder valve by turning counter clockwise. If you hear a "POPPING" sound, turn gas off IMMEDIATELY; it indicates a heavy leak at the connection. Call your gas dealer or the local fire department.
4. Check every connection from the gas cylinder up to and including the connection to the manifold pipe assembly (the pipe that goes to the burner) by brushing or spraying the soapy solution on the connections.
5. If soap bubbles appear, there is a leak. Turn off the cylinder valve IMMEDIATELY and retighten connections. Open the cylinder valve again, and recheck.
6. If leaks cannot be stopped, DO NOT ATTEMPT TO REPAIR YOURSELF. Call an authorised centre for help.
7. Always close the cylinder valve after leak test by turning clockwise.

Only those parts recommended by the manufacturer should be used on the cooker. Substitution can void the warranty. Do not use the gas cooker until all connections have been checked and do not leak.

■ SAFETY TIPS

1. Always check for leaks after every gas cylinder change.
2. Always check for leaks of every connection before each use.
3. Always turn off gas supply if a leakage is detected.

4. Use long stove tool to avoid burns.

5. If grease or hot objects fall from the stove onto the valve, regulator, hose or anything that carries gas, shut off the gas immediately. Check the cause and remove. Refer to the leak test before continuing.

6. Do not remove the grease tray if the cooker hasn't completely cooled.
7. Close all control knobs and the cylinder valve when the cooker is not in use.
8. Never move the gas cooker while in use or still hot.
9. Disconnected the cylinder in storage or being transported must have a safety cap installed. Do not store a gas cylinder in enclosed spaces like car port, covered patio, porch, garage or other buildings.
10. Never leave a gas cylinder in a recreational vehicle or boat which may become overheated by the sun.
11. Do not store gas cylinder in or near an area where children play.
12. Disconnect the cylinder and remove from the cooker if the cooker is stored indoors.
13. For any other problem, see "troubleshooting" or contact an authorised assistance centre.

> INSTALLER FINAL CHECK LIST

• At least 1m clearance maintained from combustible constructions to the sides and back of this gas cookers.
• There is no unprotected combustible construction over the gas cookers.
• All internal packaging removed.
• Burners are sitting properly on cavities.
• Knobs turn freely.
• Unit tested and free of leaks.
• User informed of gas supply shut off valve location.

GAS COOKERS LIGHTING INSTRUCTIONS

WARNING: IMPORTANT!

Read all operating instructions before lighting. Make sure all gas cock knobs are in the 'O' position and open cylinder valve.

BEFORE LIGHTING

Inspect the gas supply hose before turning the gas "ON". If there is evidence of cuts, wear, or abrasion, it must be replaced before use, the replacement hose assembly shall be the one specified by the manufacturer.

VERY IMP ORTANT: A LWAYS INSPECT THE HOSE BEFORE EACH USE OF THIS GAS COOKER.

1. Read instructions before lighting.
2. Open the lid during lighting.
3. Simply place a match between the coils on the end of the matchstick holder, light the match and place it close to the burner holes.
4. Push and turn the knob to "HI" position, and make sure the burner lights and stays lighted.
5. If the burner does not ignite after step 4, turn off the gas and wait 5 minutes for any excess gas to dissipate, then either repeat step 3 and 4 or light with an external flame.
6. Repeat 3\~4 to light other burners.
7. Adjust burner control to appropriate setting. When you have finished cooking, close all the gas controls on the cooker to "O".

Keep a spray bottle of soapy water near the gas supply valve and check the connections before each use.

Do not light the gas cooker if odor of gas is present.

■ FLAME CHARACTERISTICS

Check for proper burner flame characteristics. Each burner is adjusted prior to shipment; however, variations in the local gas supply may take subtle necessary adjustments.

Burner flames should be blue and stable with no yellow tips, excessive noise, or lifting. If any of these conditions exist call the authorised technician and/or assistance centre. If the flame is yellow, it indicates insufficient air.

If the flame is noisy and tends to lift away from the burner, it indicates too much air.

NOTE: small yellow tips are ok.

OPERATION INSTRUCTIONS

1. Often clean the cooker, a grease fire may damage the cooker and may occur if the cooker has not been cleaned frequently.
2. NEVER leave the cooker unattended while using.
3. Do not use water to extinguish the grease fire, it may cause body injury. Turn knobs off and gas cylinder off in case grease fire occurs.
4. The grease fire cannot be extinguished by closing the lid. Turn off the knobs and gas cylinder valve IMMEDIATELY in the event of a grease fire.

CARE & MAINTENANCE

It is suggested to have your cooker cleaned/maintained every two months or after long period of not using.

1. Keep the cooker area clear and free from combustible materials, gasoline and other flammable vapors and liquids.
2. Visually check burner flames as following:

a. Remove cooking vessels.

b. Light burners.
c. Turn knobs from "HI" to "LOW", Check the flame status, the flame in "LOW" position should be smaller than in "HI" position, as shown in the figure.
d. Always check flame before each use, see TROUBLE HOOTING if any abnormal status is found.

1. Call an authorised technician and/or centre warranty for the replacement parts.

CLEANING

■ ENAMELING CLEANING

Alwa ys use the mildest cleaning the enameling parts.

DO NOT USE ACID DETERGENT AND/OR ANTIRUST TO CLEAN THE CONTROL PANEL WITH PRINTING. SUCH STRONG CLEANSER MAY CLEAN OFF THE PRINTING.

■ COOKING AREA CLEANING

The easiest way to clean the burner is to clean it immediately after turning off the flame and completed the cooking. Wear a mitt to protect your hand from the heat and steam. Dip a brass bristle barbeque brush in tap water and scrub the hot cooker. Dip the brush frequently in the water.

Steam, created as water contacts the hot cooker, assists the cleaning process by softening any food particles. The food particles will fall and burn.

Never immerse a hot part in water.

■ COOKER BURNER CLEANING

1. Be sure the cylinder valve and the knobs are in the "O" position. Make sure the gas cooker is cool.
2. Clean the exterior of the burner with a wire brush. Clear stubborn scale with a metal scraper. Clear any clogged ports with a straightened paper clip. Never use a wooden toothpick as it may break off and clog the port.
3. Please note if insects or other obstructions are blocking the flow of gas through the burner, you will need to call the indicated authorised centres.

TROUBLE SHOOTING

■ SPIDER AND INSECT WARNING

Spiders and insects can nest in the burners after storing, these nest can cause fires inside the tube or beneath the cooker. This is very dangerous condition. So always clean the burners before use after storing.

Check and clean the venturi in the case of blockage found.

You are suggested to inspect the venturi every two months.

Inspect the burners at least once a year or immediately in case any of the following conditions occur:

1. Yellow flame with insects burning smell.
2. Temperature can't rise.
3. Heats unevenly.
4. The burners make popping noises.

PROBLEMS	POSSIBLE CAUSE	SOLUTIONS
	Orifice blocked	Check the orifice for blockage

Burner won't light after turn and push the knobs.	Wire is shorting	Replace with new electrode assembly with wires.
Burner can't light by match.	No gas.Gas flow are not smooth.Incorrect assembly between burner and valve.	Open the gas cylindervalue.Clear burner tubes.Re-assemble.
Yellow or orange flame, with gas odor.Low heat with knob in "HI" position.	Incomplete combustion.	Call our customer service center.
	Gas hose bent or kinked.Burner or orifice blocked.Low gas pres sure.Stove not preheated.	Smoothen it.Clear.Call the gas dealer.Preheat the stove for 15 minutes.
Flare-up.	Over high temp.Grease deposit.	Adjust.Clean.
Flame out.	Over high winds.	Find a less wind place.
Flame lifting.	Over high gas pres sure.	Call the gas dealer.
Flashback.	Burner port blocked.	Clean.
Grease fire.	Grease accumulated in food.	Turn off knobs, cylinder Valve, leave lid open, let fire burn out. Clean the stove after cooling.

■ FOOD SAFETY

Always follow the tips below to enjoy a safe and heath outdoor cooking:

1. Always use hot soapy water to wash hands, surfaces & utensils after processing raw meat.
2. Always separate the raw meats from done foods to avoid cross contamination.
3. Always use clean utensils to handle the food.
4. Always cook the meat thoroughly to kill germs. Use a thermometer to inspect the inner temperature of the meat, if necessary.
5. Place the done foods and leftovers promptly into refrigerator, if you are going to eat them at that moment.

DO NOT LEAVE THE COOKER UNATTENDED WHILE COOKING.

Wear protective gloves when manipulating elements particularly hot.

PLACEMENT OF THE GAS COOKER

1. Clean the gas cooker.
2. Store the cooker in well-ventilated dry outdoors, away from ignition source and out of reach of children when the gas cylinder is connected to the cooker.

3. Store the cooker in dry indoors ONLY after the gas cylinder is turned off and removed, the gas cylinder must store outdoors, out of the reach of children. NEVER store the cylinder in a building, garage or any other enclosed area.

4. Put on the vinyl cover supplied with this cooker.

This product is compliant with current regulations on electrical safety and electromagnetic compatibility.

MADE IN CHINA – Imported and distributed by DP srl - Via S. D'Acquisto, 5 Aversa 81031 (CE) - Tel. [phone] - https://www.dpm-ped.com/ - [e-mail]

Product/s model/s.: DPM6051 (IGNIS) - DPM6052 (IGNIS2) - DPM6053 (IGNIS3) - DPM6054 (IGNIS4).

WASTE DISPOSAL:

DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste electrical and electronic equipment (WEEE). Member States shall adopt appropriate measures to minimise the disposal of WEEE in the form of unsorted municipal waste, to ensure the correct treatment of all collected WEEE and to achieve a high level of separate collection of WEEE.

The symbol indicating separate collection for EEE consists of the crossed-out wheeled bin, as shown below. The symbol must be printed visible legibly and indelibly.

erion

2531