DSP3200 - Loudspeaker MERIDIAN - Free user manual and instructions

Name: DSP3200
Brand: MERIDIAN
Rating: 8 (136 reviews)

Find the device manual for free DSP3200 MERIDIAN in PDF.

📄 8 pages

EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs

Pick your language and provide your email: we'll send you a specifically translated version.

This manual is not available in your language

Desired language Your email address

Product Type	Digital Active Loudspeaker
Brand	Meridian
Model	DSP3200
Connectivity Input	SpeakerLink (digital)
Connectivity Output	SpeakerLink (daisy-chain)
Channel Selector	Digital Channel Selector (L/C or R)
Power Supply	AC mains, Class 1 construction
Standby Indicator	Green LED (dim = standby, bright = operating)
Stand Requirement	Must use Meridian DSP3200 Stand (SP5543)
Ventilation	Minimum 10 cm clearance all around
Cleaning	Use a dry cloth only
Included Accessories	Power cord, user manual
Regulatory Compliance	FCC Class B, EN55013/EN55020
Safety	No power switch; unplug to disconnect; avoid water, moisture, heat
Compatible Systems	Meridian Audio Core 200, Digital Surround Controller, Sooloos
Digital Technology	Built-in digital signal processing and amplification
SpeakerLink Cable	Required (not included)
Application	Left/centre/right channel in stereo or surround system

Frequently Asked Questions - DSP3200 MERIDIAN

How do I connect my DSP3200 speakers to a Meridian Audio Core 200?

Connect the SpeakerLink output of the Audio Core 200 to the SpeakerLink input of the Master DSP3200 using a Meridian SpeakerLink lead. Then connect the Master's SpeakerLink output to the Slave's input. Set the Digital Channel Selector to L/C for left channel and R for right.

Can I use the DSP3200 as rear speakers in a surround system?

Yes, they are ideal as rear loudspeakers in a Meridian Digital Theatre with a Digital Surround Controller such as the G68. Connect using home run or daisy-chain wiring.

How do I set the channel selector on the DSP3200?

Set the Digital Channel Selector switch on the back panel to L/C for left or centre channel, or to R for right channel.

What stand should I use for the DSP3200?

Only use the Meridian DSP3200 Stand, part number SP5543. Use with other stands may cause instability and possible injury.

How do I clean the DSP3200?

Clean only with a dry cloth. Do not use any liquids or cleaning agents.

What does the standby indicator mean?

The green LED is dimly illuminated when the speaker is in standby and brightly illuminated when operating. The speaker is switched via SpeakerLink from the Meridian system.

Can I daisy-chain multiple DSP3200 speakers?

Yes, connect the SpeakerLink output of one speaker to the SpeakerLink input of the next speaker. This allows multiple speakers to be connected in a chain.

Is the DSP3200 compatible with non-Meridian equipment?

The DSP3200 is designed for use with Meridian systems using SpeakerLink connections. It may not work with other brands without an appropriate converter.

How do I power off the DSP3200?

There is no power switch. To power off, unplug the power cord from the unit or the mains outlet. Alternatively, the Meridian system will put the speaker into standby via SpeakerLink.

What should I do if the speaker does not turn on?

Check the power cord connection, ensure the Meridian system is on and sending a signal via SpeakerLink. Verify the channel selector is set correctly. If still off, refer servicing to qualified personnel.

User questions about DSP3200 MERIDIAN

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual DSP3200 - MERIDIAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSP3200 by MERIDIAN.

USER MANUAL DSP3200 MERIDIAN

Important safety instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Unplug this apparatus during lightning storms or when unused for long periods of time.

- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

This apparatus has been designed with Class 1 construction and must be connected to a mains socket outlet with a protective earthing connection (the third grounding pin).

This apparatus does not include a power switch. The apparatus may be isolated from mains power either by unplugging the power connector from the rear of the unit, or by unplugging the connector at the opposing end of the power cord or cable from its supply outlet. As a result, either or both of these connectors should remain accessible

CAUTION: This DSP3200 for use only with the Meridian DSP3200 Stand, part number SP5543. Use with other stands is capable of resulting in instability causing possible injury.

Safety warnings

Do not expose the unit to dripping or splashing.
Do not place any object filled with liquid, such as a vase, on the unit.
Do not place naked flame sources, such as lighted candles, on the unit.
To avoid overheating leave at least 10cm around the equipment to ensure sufficient ventilation.
Do not position the unit in direct sunlight, near heat sources such as a radiator, or directly on top of heat producing equipment, such as a power amplifier.
To avoid interference do not position the unit near strong electrical or magnetic radiation, such as near a power amplifier.

Radio interference

FCC Warning: This equipment generates and can radiate radio frequency energy and if not installed and used correctly in accordance with our instructions may cause interference to radio communications or radio and television reception. It has been type-tested and complies with the limits set out in Subpart J, Part 15 of FCC rules for a Class B computing device. These limits are intended to provide reasonable protection against such interference in home installations.

EEC: This product has been designed and type-tested to comply with the limits set out in EN55013 and EN55020.

MERIDIAN DSP3200 - Radio interference - 1

Copyright

Meridian Audio Ltd

Latham Road

Huntingdon

Cambridgeshire

PE29 6YE

England

Visit us on the Web:

http://www.meridian-audio.com

Part no: DSP3200 (P88394)

This guide was produced by: Human-Computer Interface Ltd, http://www.interface.co.uk/

Unpacking

The DSP3200 is supplied with the following accessories:

Power cord.
This manual.

Connections

The following diagram gives details of the connections on the base of the speaker:

SpeakerLink input output Power Easinkor Ir Input Output UCR Digital Channel Selector Husd Power Inlet Channel selector

If either of these items are missing please contact your dealer.

NOTE: You should retain the packaging in case you need to transport the units.

Digital connections

Use this connection To connect to this

SpeakerLink input The SpeakerLink output of a Meridian

Sooloos component, Digital Surround

Controller, or Audio Core 200.

SpeakerLink output The Speakerlink input of a second

DSP3200 digital speaker, when daisychaining the speakers.

Miscellaneous

Switch Description

Digital Channel Selector Set to L/C to use the speaker as a left or centre channel speaker. Set to R to use the speaker as a right channel speaker.

Standby indicator

The status of the DSP3200 is shown by a green standby indicator on the back panel.

Status Description

Dimly illuminated Speaker in standby

Brightly illuminated Speaker operating

The speakers are switched on or into standby as appropriate via the SpeakerLink connections by the Meridian system they are connected to.

Applications

To connect a pair of DSP3200s to a Meridian Audio Core 200

The DSP3200s are ideal for a compact Audio Core 200 based system.

- Connect the lower SpeakerLink output on the AC200 to the Master DSP3200, using a Meridian SpeakerLink lead.

Connect the upper SpeakerLink output on the AC200 to the Slave DSP3200, using a Meridian SpeakerLink lead.
Make sure the Channel selector is set to the L/C position on the back of the left speaker and to the R position on the back of the right speaker.

MERIDIAN DSP3200 - To connect a pair of DSP3200s to a Meridian Audio Core 200 - 1

flowchart

graph LR
    A["DSP3200 – Slave"] --> B["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    B --> C["SpeakerLink lead"]
    D["Meridian Audio Core 200"] --> E["SPEAKERLINK IN OUT"]
    E --> F["SpeakerLink lead"]
    G["DSP3200 – Master"] --> H["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    H --> I["SpeakerLink lead"]

To use a pair of DSP3200s in a Meridian Digital Theatre

DSP3200s are ideal as the rear loudspeakers in a Meridian Digital Theatre, in conjunction with a Meridian Digital Surround Controller such as the G68. The following diagram shows how to connect the speakers using "home run" wiring.

- Connect the L+R SpeakerLink output on the lower row of the G68 to the Master digital speaker (here the front left speaker), using a Meridian SpeakerLink lead.

Connect the appropriate SpeakerLink outputs on the G68 to each of the remaining speakers, using Meridian SpeakerLink leads.
Make sure the Channel selector on each DSP3200 is set to the L/C position on the back of the left speaker and to the R position on the back of the right speaker.

Alternatively you can connect the speakers using "daisy chain" wiring: connect the front and rear L speakers to the G68, and then link each pair of speakers together by connecting the output from the L speaker to the input of the R speaker.

MERIDIAN DSP3200 - To use a pair of DSP3200s in a Meridian Digital Theatre - 1

flowchart

graph TD
    A["DSP3200 – Rear R"] --> B["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    C["Meridian Surround Controller"] --> D["MERIDIAN SPEAKERLINK"]
    E["DSP3200 – Rear L"] --> F["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    G["Front R – Slave"] --> H["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    I["Front L – Master"] --> J["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    K["SpeakerLink lead"] --> B
    K --> D
    K --> F
    K --> H
    K --> J
    K --> O["SpeakerLink leadS"]
    P["SpeakerLink lead"] --> D
    P --> F
    P --> J
    Q["Centre – Slave"] --> H
    Q --> J

To create a stand-alone Sooloos system

The DSP3200s can be connected directly to a Meridian Media Core 200 to make an ideal compact Sooloos system.

You can browse and control music on the system using the Sooloos application on an iPad, iPhone, or iPod Touch, or the Control:PC/Control:Mac application on a computer.

- Connect the Network socket on the Media Core 200 to one of the LAN network connections on your Router, using a CAT5 cable.

Make sure the WAN/Internet port on the Router is connected to the rest of your network, or to your Cable/DSL Modem.
Connect the SpeakerLink output on the Media Core 200 to the Master DSP3200 SpeakerLink input, using a Meridian SpeakerLink lead.
Connect the SpeakerLink output from the Master DSP3200 to the SpeakerLink input of the Slave DSP3200, using a Meridian SpeakerLink lead.

For information on configuring your Media Core 200 please refer to the Media Core 200 User Guide.

MERIDIAN DSP3200 - To create a stand-alone Sooloos system - 1

flowchart

graph TD
    A["DSP3200 - Slave"] -->|SpeakerLink lead| B["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    B --> C["Router"]
    C -->|Internet| D["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    D --> E["Network"]
    E --> F["MERIDIAN SPEAKERLINK OUT"]
    F --> G["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    G --> H["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    H --> I["Network"]
    I --> J["MERIDIAN SPEAKERLINK OUT"]
    J --> K["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    K --> L["Network"]
    L --> M["MERIDIAN SPEAKERLINK OUT"]
    M --> N["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    N --> O["Network"]
    O --> P["MERIDIAN SPEAKERLINK OUT"]
    P --> Q["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    Q --> R["Network"]
    R --> S["MERIDIAN SPEAKERLINK OUT"]
    S --> T["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    T --> U["Network"]
    U --> V["MERIDIAN SPEAKERLINK OUT"]
    V --> W["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    W --> X["Network"]
    X --> Y["MERIDIAN SPEAKERLINK OUT"]
    Y --> Z["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    Z --> AA["Network"]
    AA --> AB["MERIDIAN SPEAKERLINK OUT"]
    AB --> AC["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    AC --> AD["Network"]
    AD --> AE["MERIDIAN SPEAKERLINK OUT"]
    AE --> AF["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    AF --> AG["Network"]
    AG --> AH["MERIDIAN SPEAKERLINK OUT"]
    AH --> AI["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    AI --> AJ["Network"]
    AJ --> AK["MERIDIAN SPEAKERLINK OUT"]
    AK --> AL["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    AL --> AM["Network"]
    AM --> AN["MERIDIAN SPEAKERLINK OUT"]
    AN --> AO["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    AO --> AP["Network"]
    AP --> AQ["MERIDIAN SPEAKERLINK OUT"]
    AQ --> AR["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    AR --> AS["Network"]
    AS --> AT["MERIDIAN SPEAKERLINK OUT"]
    AT --> AU["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    AU --> AV["Network"]
    AV --> AW["MERIDIAN SPEAKERLINK OUT"]
    AW --> AX["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    AX --> AY["Network"]
    AY --> AZ["MERIDIAN SPEAKERLINK OUT"]
    AZ --> BA["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    BA --> BB["Network"]
    BB --> BC["MERIDIAN SPEAKERLINK OUT"]
    BC --> BD["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    BD --> BE["Network"]
    BE --> BF["MERIDIAN SPEAKERLINK OUT"]
    BF --> BG["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    BG --> BH["Network"]
    BH --> BI["MERIDIAN SPEAKERLINK OUT"]
    BI --> BJ["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    BJ --> BK["Network"]
    BK --> BL["MERIDIAN SPEAKERLINK OUT"]
    BL --> BM["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    BM --> BN["Network"]
    BN --> BO["MERIDIAN SPEAKERLINK OUT"]
    BO --> BP["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    BP --> BQ["Network"]
    BQ --> BR["MERIDIAN SPEAKERLINK OUT"]
    BR --> BS["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    BS --> BT["Network"]
    BT --> BU["MERIDIAN SPEAKERLINK OUT"]
    BU --> BV["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    BV --> BW["Network"]
    BW --> BX["MERIDIAN SPEAKERLINK OUT"]
    BX --> BY["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    BY --> BZ["Network"]
    BZ --> CA["MERIDIAN SPEAKERLINK OUT"]
    CA --> CB["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    CB --> CC["Network"]
    CC --> CD["MERIDIAN SPEAKERLINK OUT"]
    CD --> CE["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    CE --> CF["Network"]
    CF --> CG["MERIDIAN SPEAKERLINK OUT"]
    CG --> CH["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    CH --> CI["Network"]
    CI --> CJ["MERIDIAN SPEAKERLINK OUT"]
    CJ --> CK["MERIDIAN SPEAKERLINK INPUT OUTPUT"]

DSP3200 User Guide

MERIDIAN DSP3200 - To create a stand-alone Sooloos system - 2

natural_image

Blank gray image with no visible content, text, or symbols

Table of contents Click a title to access it

Important safety instructions
Safety warnings
Radio interference
Copyright
Unpacking
Connections
Digital connections
Use this connection To connect to this
Miscellaneous
Switch Description
Standby indicator
Status Description
Applications
To connect a pair of DSP3200s to a Meridian Audio Core 200
To use a pair of DSP3200s in a Meridian Digital Theatre
To create a stand-alone Sooloos system

Manual assistant

Waiting for your message

📷

Product information

Brand : MERIDIAN

Model : DSP3200

Category : Loudspeaker