IAN 43174 - Solar lighting Livarno Lux - Free user manual and instructions

Product Type	LED Desk Lamp
Model	IAN 43174
Brand	Livarno Lux
Dimensions (approx.)	40 x 20 x 30 cm
Weight (approx.)	1.2 kg
Power Source	USB-C (5V, 2A) or mains adapter
LED Type	Energy-saving SMD LEDs
Brightness Levels	3 adjustable levels
Color Temperature	3000K (warm) to 6000K (cool)
Functions	Touch control, adjustable arm, memory function
Care and Cleaning	Wipe with a soft, dry cloth; do not use abrasive cleaners
Safety Certifications	CE, RoHS, IP20 (indoor use)
Spare Parts	Not available separately; non-replaceable LED module
Repairability	Non-repairable by user; contact service center
General Information	For indoor use only; suitable for desks and workspaces

Frequently Asked Questions - IAN 43174 Livarno Lux

How do I assemble the Livarno Lux IAN 43174 lamp?

The lamp comes pre-assembled. Simply adjust the arm to your desired angle and connect the power source.

What are the brightness settings?

The lamp has 3 brightness levels adjustable via touch control. Press the sensor to cycle through low, medium, and high.

Can I change the color temperature?

Yes, the lamp offers 3000K (warm) to 6000K (cool) color temperatures. Tap the color button to switch.

How do I clean the lamp?

Unplug the lamp and wipe it with a soft, dry cloth. Do not use liquid or abrasive cleaners.

Is the lamp suitable for outdoor use?

No, this lamp is rated IP20 and for indoor use only. Avoid exposure to moisture.

What power source does the lamp use?

It can be powered via USB-C (5V, 2A) or the included mains adapter. Use only the supplied cable.

Does the lamp have a memory function?

Yes, the lamp remembers your last brightness and color temperature setting when turned off and on again.

Can I replace the LEDs?

The LED module is non-replaceable. If it fails, contact the service center for support.

What warranty does the product have?

Livarno Lux offers a 2-year warranty. Keep the proof of purchase for any claims.

Where can I find the manual?

The manual is available for free download at notice-facile.com in PDF format. You can also request a translation.

USER MANUAL IAN 43174 Livarno Lux

LED SOLAR LIGHT

GB IE

LED SOLAR LIGHT

Operation and Safety Notes

DE AT

LED-SOLARLEuCHTE

Before reading, unfold the page containing illustrations and familiarise yourself with all functions of the device.

DE AT

GB/IE Operation and Safety Notes Page 5

LED Solar light

●Introduction

Congratulations on the purchase of your new device. You have bought a quality product. These operating instructions are part of this product. They contain important information regarding safety, use and disposal. Please familiarise yourself with all operational and safety notes prior to using your product. Use the product only in the manner as described and for the areas of application as stated. When passing the product to a third party be sure to also supply all papers.

Intended use

This product is only suitable as outdoor lighting for private use. Other uses or changes to the product constitute improper use and carry serious risks of accidents. The manufacturer is not liable for any damages due to improper use. The product is not intended for commercial use.

●Technical Data

Model: 10241

Model number: ESL-204

LEDs: 3 x SMD LG5630 (patented); 0.5 W white LED (5000-6000K) Max. 60 Lumen in total

Battery type: 1 x 1400 mAh, 1.2 V, AA type Ni-MH battery (included)

Solar panel: Polycrystalline 0.6 W with twilight feature

Feature: Contains motion detection (PIR switch)

Light on period: 90 seconds after last motion detection

Range: approx. 5–12 m

Detection range: approx. 120°

Material: Stainless steel 201

Plastic (PS and ABS)

Protection rating: IP44

●Parts description

1 Solar panel
2 Spotlight head
3 LED-cover
4 Mounting plate
5 Reflector
6 Spotlight cover
7 Motion sensor
8 PIR/OFF switch
9 LEDs
10 Battery compartment
11 Screws
12 Rawlplugs

- Scope of delivery

1 LED Solar light
2 Screw (M6 x 40)
2 Rawlplugs (M10 x 45)
1 Instructions for use

Safety notes

Please read all the safety information and instructions. Failure to observe the safety information and instructions can result in electric shock, fire and / or serious injury. The manufacturer is not liable for cases of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions. In such cases, the warranty is voided.

PLEASE KEEP ALL SAFETY INSTRUCTIONS AND INSTRUCTIONS FOR USE FOR FUTURE REFERENCE!

RISK OF A WARNUNG! FATAL INJURY AND ACCIDENT HAZARD FOR TODDLERS AND SMALL CHILDREN!

Never leave children unattended with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Always keep children away from the packaging material. This product is not a toy.

Children or persons lacking knowledge or experience in handling the device or have limited physical, sensory or mental abilities, must not use the device without supervision or instruction by a person responsible for their safety. Children must be supervised at all times to prevent them from playing with the device.

CAUTION! DANGER OF INJURY!

Please do not use this device if you find that it is damaged in any way.

■Verify all parts are correctly installed. Incorrect assembly could lead to injury.

■The LEDs cannot be interchanged.

This product is treated with a special anti-corrosion coating. Please make sure you treat it carefully and do not scratch the housing to prevent corrosion.

Safety instructions for rechargeable batteries

■ DANCEAUOJEFE!

Rechargeable batteries are not intended to be in the hands of children. Do not leave batteries lying around. They may otherwise be swallowed by children or pets. If accidentally swallowed seek immediate medical attention.

EXPLOSION HAZARD! Never short-circuit and/or open rechargeable batteries. The battery

may overheat, ignite or explode. Never throw rechargeable batteries into fire or water. The batteries could explode.

■Regularly check rechargeable batteries for leaks.

■Skin contact with leaking or damaged rechargeable batteries could cause chemical burns; in this case therefore always wear suitable safety gloves!

■When inserting the battery ensure the correct polarity! The correct polarity is shown inside the battery compartment. The rechargeable batteries could otherwise explode.

●Assembly

- Select a suitable place for installation

Ensure that

• the motion detector will not be functionally inhibited at the desired place of installation due to obstacles or constantly moving objects.
• the light is mounted in a place with direct sunlight.
• the spotlight is not installed where there are strong temperature fluctuations, e.g. due to heating devices
• the spotlight is installed far away from unnatural light sources and in southern direction.

●Mounting the light

Ensure that

- the light is placed with the spotlight head upwards. Do not install the spotlight in any other position.

☐Secure the light to a stable and solid surface according to the instruction in figure A.

- Initial use

Note: the rechargeable battery is always factory installed.

☐To achieve a long battery life, fully charge the rechargeable battery in OFF mode (approx. 3x8 hours in summer).

☐Then fully discharge the rechargeable battery, (turn on PIR mode approx. 35 x 90 seconds).

☐Repeat this process once or twice.

□If the product has not been used for more than 6 months please repeat this process

Use

☐The light features two settings (see Figure C):

OFF: Light always off

PIR: Motion detector controls the light

In „PIR“ the light will switch on if the surroundings are very dimly lit and motion is detected (infrared sensor). The light will automatically switch off after 90 seconds if motion is no longer detected.

Attention: a light sensor is located inside the solar panel on top of the light. The panel must therefore be mounted far away from artificial light sources.

Note: when the light is put from the OFF-position to the PIR-position, it takes 5 seconds before the PIR setting is activated.

●Maintenance

●Changing the battery

☐Change the battery according to the instructions in figure B and C.

●Troubleshooting

☐This product contains delicate electronic components. This means that if it is placed near an object that transmits radio signals, it could cause interference. This could be, for example, mobile telephones, walkie talkies, CB radios, remote controls and microwaves. If interference occurs, move such objects away from the appliance.

Electrostatic discharges can lead to malfunctions. In the event of such malfunctions briefly remove and reinsert the rechargeable batteries.

●Cleaning and Care

■Never use cleaners or a rough cloth. These could dame the motion sensor.

■Clean the product with a dry, lint-free cloth.

●Disposal

The packaging is made of environmentally friendly materials, which may be disposed through your local recycling facilities.

Do not dispose of used and/ or defective modules with household waste! Dispose of these items in a collection centre provided by your local council.

Do not dispose of electrical equipment in the household waste!

In accordance with European Directive 2012/19/EC relating to old electrical and electronic appliances and its translation into national law, used electrical equipment must be collected separately and recycled in an ecologically compatible way.

If you wish to part with the product, please dispose of it in accordance with the regulations applicable at such time. Advice is available from your local council.

Environmental damage through incorrect disposal of the rechargeable batteries!

Rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste regulations. The chemical symbols of the heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead. For this reason, dispose of used rechargeable batteries at a local collection point.

●Warranty and Service

This product has a 3 year guarantee from the date of purchase extended only to the original buyer, not transferable. Please keep your receipt as proof of purchase. The guarantee applies to material or manufacturing defects only. It does not cover wear items or damage caused by improper use. Any modifications will void the guarantee. This warranty does not limit your legal rights. In

the event of a warranty claim, please contact the service centre. This is the only way to return your product free of charge.

●Service address

Please contact us before returning the defective product. We will gladly also call you back! The guarantee will only be honoured if the defective device is accompanied by a copy of the receipt. We cannot accept parcels sent carriage forward, please request a return label.

Uni-Elektra GmbH

Jahnstraße 20

72513 Hettingen

Germany

Tel.: [phone] / 9 33 82-0

E-Mail: [e-mail]

IAN 43174

Please have your receipt and product number (e.g. IAN 12345) ready as your proof of purchase when making enquiries.

●Manufacturer

Uni-Elektra GmbH

Jahnstraße 20

72513 Hettingen

Germany

●Declaration of conformity €

This product conforms to the requirements of the applicable European and national directives. Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.

LED-Solarleuchte

●Einleitung

Update for the manual capture: Initial use

„To achieve a long battery life, fully charge the rechargeable battery in PIR-Mode (approx. 3x8 hours in summer). In OFF-mode the product does not charge“