Soundweb London BLU-8v2 - Uncategorized BSS Audio - Free user manual and instructions
Find the device manual for free Soundweb London BLU-8v2 BSS Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Networked Digital Audio Processor |
| Brand | BSS Audio |
| Model | Soundweb London BLU-8v2 |
| Audio Channels | 8 inputs, 8 outputs |
| Form Factor | 1U rackmount |
| Dimensions (W x H x D) | 483 x 44 x 300 mm |
| Weight | 4.0 kg |
| Power Supply | 100-240 V AC, 50/60 Hz, 50 W |
| Network Connectivity | Ethernet (CobraNet compatible) |
| Signal Processing | DSP-based mixing, routing, EQ, dynamics |
| Control Interface | HiQnet protocol, web interface |
| Latency | Low latency (typically < 1 ms) |
| Sampling Rate | 48 kHz or 96 kHz |
| Operating Temperature | 0°C to 40°C |
| Compliance | CE, UL, RoHS |
| Maintenance | Keep dry; clean with soft cloth; avoid dust |
| Safety Warnings | Disconnect power before service; use grounded outlet |
| Spare Parts | Contact BSS Audio or authorized dealer |
| Reparability | Professional service only; no user-serviceable parts |
Frequently Asked Questions - Soundweb London BLU-8v2 BSS Audio
What is the BSS Audio Soundweb London BLU-8v2?
The Soundweb London BLU-8v2 is a networked digital audio processor with 8 inputs and 8 outputs, designed for professional audio systems. It supports CobraNet and HiQnet for control.
How do I connect the BLU-8v2 to my network?
Use a standard Ethernet cable to connect the device to a switch. The BLU-8v2 supports CobraNet for audio transport. Configure IP settings via the built-in web interface.
What software is needed to configure the device?
Use BSS Audio London Architect software (available from the BSS website) to design and deploy configurations. The device also offers a web-based interface for basic setup.
Can I use the BLU-8v2 with Dante networks?
No, the BLU-8v2 is designed for CobraNet. For Dante compatibility, consider newer Soundweb London models like the BLU-8v3 or BLU-16.
How many devices can be networked together?
The number depends on network switches and CobraNet bandwidth. Typically, up to 32 devices can share a CobraNet network with proper configuration.
What is the power consumption of the BLU-8v2?
The device consumes approximately 50 W. It operates on 100-240 V AC, 50/60 Hz.
Can I rack-mount the BLU-8v2?
Yes, it is a 1U rackmount unit. Use the included rack ears for installation in a standard 19-inch rack.
How do I update the firmware?
Firmware updates are performed via the London Architect software. Download the latest firmware from BSS Audio's website and follow the update wizard.
What should I do if the device does not power on?
Check the power cable and outlet. Verify that the power switch is on. If the issue persists, contact BSS Audio support for assistance.
Is the BLU-8v2 compatible with third-party controllers?
Yes, it supports HiQnet control protocol. Third-party devices that implement HiQnet can discover and control the BLU-8v2. Refer to the HiQnet documentation for details.
User questions about Soundweb London BLU-8v2 BSS Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Soundweb London BLU-8v2 - BSS Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Soundweb London BLU-8v2 by BSS Audio.