IAN 273178 - Bike Accessories CRIVIT - Free user manual and instructions

Product Type	Children's Bicycle Helmet
Brand	Crivit
Model	IAN 273178
Intended Use	Cycling, skateboarding, inline skating, roller skating
Safety Standard	EN 1078
Certification Body	TÜV Rheinland (Notified Body 0197)
Shell Material	Polycarbonate (PC)
Inner Material	EPS foam
Ventilation	Multiple ventilation holes
Sizing System	Adjustable headband with rotary knob (width) and height adjustment (2 positions)
Chin Strap	Adjustable with clip closure and strap divider
Inner Padding	Removable, washable (hand wash below 30°C)
Additional Features	HeiQ® Pure dynamiq (silver-based odour control), ADAPTIVE thermal control
Attachment	Included accessory mount (e.g., for a light or peak)
Care Instructions	Clean with pH-neutral detergent and soft cloth; do not use solvents
Warranty	3 years from date of purchase
Lifespan	Replace within 5 years from manufacture date or after any impact
Manufacture Date Reference	Version 04/2016 (example, actual date may vary)
Disposal	Recycle packaging and product according to local regulations

Frequently Asked Questions - IAN 273178 CRIVIT

How to adjust the helmet size?

Use the rotary knob at the back to adjust the headband width: turn clockwise to tighten, counter-clockwise to loosen. Additionally, the headband height can be adjusted by moving the connection pins to different locking points (2 positions). Ensure the helmet fits snugly and does not move when the chin strap is loose.

How to clean the helmet?

Clean the outer shell with a soft cloth and a mild solution of pH-neutral detergent and water. Do not use solvents, abrasive cleaners, or petroleum-based products. The inner padding can be removed and hand washed with soapy water below 30°C, then dried at room temperature.

Is this helmet suitable for cycling?

Yes, this helmet is specifically designed for cycling, skateboarding, inline skating, and roller skating. It complies with EN 1078 standard for these activities. It is not intended for other sports or motorcycling.

What is the lifespan of the helmet?

The helmet should be replaced no later than 5 years from the date of manufacture. Additionally, replace immediately after any impact, even if no visible damage is present, as protection may be compromised.

How to mount the attachment?

Mount the attachment by inserting half of the attachment stopper into a ventilation hole, then push down and twist the attachment onto the helmet. Use a blunt pen as an aid if needed. To remove, pinch the sides and pull out.

Does the helmet have any certifications?

Yes, it is certified by TÜV Rheinland (Notified Body 0197) according to European Directive 89/686/EEC and harmonized standard EN 1078 for bicycle and skate helmets.

Can I paint the helmet or apply decals?

No, never paint the helmet or apply decals or labels, as solvents can damage the helmet's protective properties. Only use original replacement parts.

What should I do after a crash or impact?

Replace the helmet immediately, even if the damage is not visible. The helmet is designed for a single impact and its protection is no longer guaranteed after any accident.

How to adjust the chin strap?

Adjust the chin strap length using the loop and the strap divider clip. Ensure the strap does not cover the ears, the divider does not cause discomfort, and the fastener is not on the chin. The strap should be tight enough that only a few fingers can slide under.

What is the warranty period and how to claim?

The helmet has a 3-year warranty from the date of purchase for material and workmanship. For claims, contact the service hotline (e.g., 0871 5000 720 for GB) or email [e-mail]. Keep your receipt.

USER MANUAL IAN 273178 CRIVIT

Instructions for use

DE AT CH

KINDER-

FAHRRADHELM

Gebrauchsanleitung

DK

CYKELHJELM TIL

B∅RN

Brugervejledning

IAN 273178

IAN 273178

Before reading, fold out the illustration page and get to know all of the functions of your unit.

Diagram of a belt buckle with a double-headed arrow indicating vertical motion (no text or symbols)

Line drawing of a car dashboard with three circular gauges and a central rotary knob (no text or symbols)

Simple diagram of a circular object with internal oval shapes and a numbered label '2' pointing to the top-left corner (no text or symbols on the object itself)

GB IE

Parts Description

1. PC helmet shell
2. Ventilation holes
3. Size adjustment system
4. Rotary knob
5. Strap divider
6. Clip closure
7. Chin strap
8. Attachment

DK

Betegnelse på dele

With your purchase you have decided on a high-quality product.

Get to know the product before you start to use it. Carefully read the following instructions for use. Use the product only as described and only for the given areas of application.

Keep these instructions safe. When passing the product on to a third party, always make sure that the documentation is included.

Important information

Please read the following instructions and information carefully before using your new helmet for the first time. This helmet was developed for use with bicycles, skateboards, inline skates, roller skates and similar groups, and manufactured according to state of the art. Despite maximum safety standards, serious accidents may result in injuries. In some cases, the impact may be so strong the helmet does not effectively protect the rider from head injuries.

Compliance with the requirements according to Annex II of European Directive 89/686/EEC (and subsequent amendments) as well as those of harmonizing technical standard EN 1078 was certified by the issuing authority TÜV Rheinland LGA Products GmbH, Tillystr. 2, D-90431 Nürnberg, Germany, Notified Body No 0197.

Intended use

This article is made for bicycle riders, skateboarders, inline and roller skaters, and other groups with similar pursuits. It is not suitable for other sports or motorcycling.

Safety notices

• Do not allow children to wear this helmet while climbing or playing as this carries a risk of strangulation.
• The helmet must be firmly seated and the chin strap closed tightly.
• Do not shift the helmet toward the neck, as this will leave your forehead unprotected.
• Do not wear headgear under the helmet.
• Be sure not to restrict air circulation.
• Never modify the helmet, its structure or the individual components.
• Never paint the helmet and/or apply decals or labels.
• The impacts of paint, decals, cleaning liquids or other solvents can seriously impair the protection of the helmet.
• The helmet is intended to protect the head in the event of an impact. This protection is no longer warranted after just one (even minor) impact. The helmet must therefore immediately be replaced following an accident, even without visible damage.
• Never use solvents or abrasive cleaners containing petroleum to clean the helmet, neither inside nor outside. Always use a pH-neutral detergent diluted in clear water; carefully rub with a soft cloth. Then dry with a lint-free cloth. The padding may be cleaned with a little soap, using a soft brush.
• Only use OEM replacement parts for your helmet.
• The life of this product varies by use. However, the product must be replaced no later than five years from the date of manufacture (Version: 04/2016).

HeiQ® Pure dynamiq

PURE Textile freshness

Experience the feeling of lasting freshness through the power of silver, keeping you odour-free all day long.

ADAPTIVE Thermal control

Feel good all over. The textile will cool you down when you're hot, and keep you dry longer in cold weather. Cools and minimises perspiration.

Helmet sizing

• Measure the circumference of the head and select the helmet size accordingly. Try several helmets before deciding. Ideally, the skin over your temples moves along when wearing the helmet.
• Verify the helmet does not move much on your head even with chin strap loose.
• The chin strap must be closed firmly for a secure seat. It is fitted correctly when it is difficult to slide your fingers under the chin straps. However, you must still be able to comfortably breathe, swallow and turn your head.
• The helmet is seated correctly if it is tight, yet comfortable on your head (Fig. B).
• If the helmet is too large (wiggles, cannot be adjusted tightly enough) or too small (pinches, forehead exposed), please select the next larger or smaller size.
• Never use the helmet if it cannot be adjusted correctly.

Adjusting the chin strap (Fig. C)

The general length of the chin strap can be adjusted with the loop. You may also use the strap divider clip to adjust the length of the chin strap. Please ensure that the strap divider does not bother you, the straps do not cover your ears, and the fastener does not rest on your chin.

Headband width adjustment (Fig. D)

Use the wheel for variable adjustment to your head size to ensure the helmet is seated optimally. Turn the wheel clockwise to tighten the headband and counter-clockwise to loosen the headband.

Headband height adjustment (Fig. E)

The height of the headband system can be adjusted to fit. There are 2 different height adjustments. Pull the headband system connection pins out of the locking points in the EPS shell. You can now attach the headband system pins in other locking points higher or lower. Push the pins into the locking points until you hear and feel them lock in. Both pins must always be locked in.

Mounting/dismantling the attachment (Fig. F)

An adult must carry out the mounting. Mount the attachment as follows: 1. Insert half of the attachment stopper (8a) into the ventilation opening (2).

1. Push down into the ventilation opening the half of the attachment stopper that is not yet in the ventilation opening by twisting the attachment onto the helmet applying pressure.

Note: We recommend using a non-pointed pen or similar as an aid to push down the attachment into place. Please take care not to damage the article or injure yourself.

In order to remove the attachment, pinch the sides of the attachment together and pull it out of the helmet.

Maintenance and care

Regular maintenance and care contributes to ensuring the safety and preservation of the helmet.

• Always use a pH-neutral detergent diluted in clear water; carefully rub with a soft cloth. Then dry with a lint-free cloth.
- The padding may be cleaned with a little soap, using a soft brush.

Inner pads

• Hand wash below 30 °C. 📁 30 °C/86 °F
• Allowed to dry at room temperature.

Four abstract geometric symbols: triangle, square, cross, and X (no text or labels)

Storage

Store the helmet in a dry, well ventilated location at room temperature when not in use. Avoid heat sources.

Disposal instructions

Please dispose of packaging and product in an environmentally friendly manner! Dispose of product through an approved disposal facility or through your local council. Please note the recycling regulations in your area.

3 years warranty

The product was produced with great care and under constant supervision. You receive a three-year warranty for this product from the date of purchase. Please retain your receipt.

The warranty applies only to material and workmanship and does not apply to misuse or improper handling. Your statutory rights, especially the warranty rights, are not affected by this warranty.

With regard to complaints, please contact the following service hotline or contact us by e-mail. Our service employees will advise as to the subsequent procedure as quickly as possible. We will be personally available to discuss the situation with you.

Any repairs under the warranty, statutory guarantees or through goodwill do not extend the warranty period. This also applies to replaced and repaired parts. Repairs after the warranty are subject to a charge.

IAN: 273178

GB Service Great Britain

Tel.: [phone] (£ 0.10/Min.)

E-Mail: [e-mail]

IE Service Ireland

Tel.: [phone] (0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: [e-mail]

You can also find spare parts for your product at:

www.delta-sport.com, category Service - Lidl Spare Parts Service

Tillykke!

www.delta-sport.com, rubrik service - reservedelservice Lidl