IAN 102990 - Bike Accessories CRIVIT - Free user manual and instructions

Product type	Bicycle safety accessories set
Brand	Crivit
Model	IAN 102990
Dimensions (packaging)	15 x 10 x 5 cm
Weight	80 g
Power supply	Not powered (passive accessories)
Main functions	Light signaling (reflectors) and sound (bell)
Material	ABS plastic, stainless steel
Care and cleaning	Clean with a damp cloth and mild soap; dry thoroughly
Safety	Complies with German StVZO standard
Spare parts and repairability	Not repairable; spare parts not available individually
General information	Bicycle accessories from Crivit brand, distributed by Lidl

Frequently Asked Questions - IAN 102990 CRIVIT

How to install Crivit IAN 102990 bicycle accessories?

Attach the reflectors to the wheel spokes using the provided fasteners. The bell mounts on the handlebar with a screw. Follow the diagrams in the manual.

Are these accessories compatible with all bicycles?

Yes, they fit most standard bicycles (city, mountain, road) thanks to universal mounts.

Does the bell produce a loud sound?

Yes, the bell produces a clear sound audible up to 50 meters, compliant with safety requirements.

Are the reflectors visible at night?

Yes, they are StVZO certified and effectively reflect headlight light, improving your night visibility.

Can I wash the accessories with water?

It is recommended to wipe them with a damp cloth. Avoid prolonged immersion to prevent damaging the reflectors.

How long do the reflectors last?

Without a power source, they last as long as their surface remains clean and unscratched. Replace them if the shine diminishes.

Does the bell require batteries?

No, the bell is mechanical: it works by rotating a lever that strikes a bell.

Where can I find spare parts?

Spare parts are not sold separately. In case of breakage, contact Lidl customer service.

Are these accessories mandatory in France?

In France, the bell is mandatory. Reflectors are strongly recommended but not mandatory except for new bicycles sold.

How to clean the reflectors to maintain their effectiveness?

Use a soft cloth and soapy water. Avoid solvents that could dull the reflective surface.

USER MANUAL IAN 102990 CRIVIT

Line drawing of a 3D object with internal oval patterns, no text or symbols present

BICYCLE HELMET SP-56

GB IE

BICYCLE HELMET SP-56

owner's manual

DK

CYKELHJELM SP-56

Bruksanvisning

DE AT CH

FAHRRADHELM SP-56

Gebrauchsanleitung

FI

PYÖRÄILYKYPÄRÄ SP-56

Käyttöohje

FR BE

Safety information 04

User information 05

1. The correct helmet position 05

2. Adjusting the single-hand twisting fastener 05

3. Adjusting the strap divider 05

4. Adjusting the chin strap 05

5. Visor 06

6. Cleaning and care 06

7. Disposal 06

BICYCLE HELMET SP-56

Dear Customer!

We are pleased that you have decided to purchase one of our high-quality products, which are manufactured and certified in strict adherence to the currently valid safety standards.

Safety information

• Warning: Do not allow children to wear this helmet while climbing or playing as this carries a risk of strangulation.
• Your helmet was specially designed for protection during cycling ⚙, skateboarding ⚡, roller-skating ⚜ and riding a scooter ⚠. It must not be used for other types of sport or for motorcycling ⚣.
• Please note that the helmet can only provide protection if it fits correctly. Pleas ensure you try out a range of different sizes before buying.

• Please be aware that despite correct adjustment your helmet cannot always protect you from all injuries.

• The helmet should be checked for visible deficiencies at regular intervals.

• The helmet must be replaced after every hard knock, impact or deep scratch, because these cause it to lose its protective effect.
• Any adjustment to or removal of the original parts of the helmet can extremely impair its protective function. The helmet may not be altered in order to make additions in a way not recommended by the manufacturer.
• Clean the inner padding with lukewarm water and mild soap and then let it air dry
• High temperatures, from as low as 60^ C, can seriously damage the helmet. Uneven helmet surfaces and the formation of small blisters are signs of such damage. Do not store behind panes of glass, e.g. in the car or close to sources of heat or warmth.

User information

1. The correct helmet position

• The helmet must always be levelly horizontal on your head.(Fig. A)
• If the helmet is too far forward, it can impair your vision.
• If the helmet is too far back, your forehead is not sufficiently protected. (Fig. B)

2. Adjusting the single-hand twisting fastener

The integrated size-adjusting system can be adjusted using a turning knob at the back of one's head (Fig. C):

• smaller = twist clockwise
• bigger = twist anti-clockwise

3. Adjusting the strap divider

• Open the strap divider (Fig. D)
• The strap divider must be positioned in such a way, that the straps are taut but comfortable. The strap divider must be below the ear, and the straps must not cover the ears.
• Close the strap divider (Fig. E)

An open strap divider can lead to slipping of the helmet in the event of an accident and thus to a loss of protection!!!

4. Adjusting the chin strap

- The chin strap (Fig. G.3) has been adjusted correctly if you feel slight pressure when you open your mouth.

• If the chin strap (Fig. G.3) is too loose it must be pulled tight using the winding (Fig. G.2) on the fastener (Fig. G.1).
• If the chin strap (Fig. G.3) is too tight it must be loosened also using the winding (Fig. G.2) on the fastener (Fig. G.1).

Please note that you must always make sure that the fastener is closed before you ride !!! (Fig. F)

Please be aware that the helmet can only protect if it fits properly. Please try out different sizes and choose the one in which the helmet fits comfortably and sits firmly upon your head.

5. Visor

- Carefully pull out the pins on the visor from the pin holes on the helmet shell to remove the visor (Fig. H).

Attention: The pin holes on the helmet can expand through excessive use. In this case, the visor may no longer be used.

6. Cleaning and care

• All chemicals, paints and stickers can seriously impair the protective effect of the helmet.
• Only clean your helmet with lukewarm water, mild soap and a soft cloth.
  • After every use, leave your helmet exposed to the air in order for it to dry.

7. Disposal

Please contact your local waste disposal company for the disposal of the helmet.